Administrator's Guide

Settings/Maintenance
44
E
Click Measure Color from Correction Value
Verification Phase.
F
Perform color measurement in the color
measurement device in the same way as color
measurement for the correction chart.
U “Correction chart color measurement (for
the "i1Pro")” on page 40
U “Correction chart color measurement (for
the "i1iSis")” on page 42
G
Click Write from Correction Value Verification
Phase.
The screen where you can enter the name of the
correction value is displayed.
H
Enter the name of the correction value, and then
click OK.
You cannot use the same name for more than
one correction value. If the same name already
exists, enter another name of the correction
value.
Verify correction accuracy.
If the verification results are "OK", write the
created correction value file to the Printer PC.
Subsequent prints are corrected using the
written correction value.
If the results are "NG", you need to create the
correction value again. Perform operations
from Print in the correction value creation
phase.