Document Camera User's Guide
Safety Instructions Thank you very much for purchasing this product. Read this document carefully to use this product safely and correctly. To allow you to solve any unknown points quickly, keep this information close at hand. So that you can use the product safely and correctly, symbols are applied in this User's Guide and on the product to indicate possible harm to the user or to others and the risk of damage to property. The indications and their meaning are as follows.
Caution v Do not place any heavy objects on the unit. It may tip over or break. v When using the unit, be sure to extend the foot. The unit may fall, causing personal injury if it strikes someone. v Be careful not to pinch your fingers in the movable parts of the unit. v Do not place the unit on an unstable location, such as a shaky table or slanted surface. The unit may drop or tip over, causing personal injury. v When raising the camera arm of the unit, use both hands.
Supplied Items List Check the following list to confirm that you have all of the supplied items. If by any chance there is anything missing or damaged, please contact your dealer. Y Document Camera Y USB cable (for use with Document Camera only) 3.0 m Y ELPDC06 Soft carrying case * Y Setup Label Y User's Guide (this guide) Y Quick Start Guide Y ArcSoft Application software for ELPDC06 * The Soft carrying case is not included when the unit is packaged together with a projector.
Part Names and Functions Top/Side/Rear Name Camera head Foot Camera arm Security slot [Freeze] [Focus] [ [ ][ ] ] [Source Search] Function Rotate the camera head ±90° to display images of a document or from a wall. Extend the foot on the bottom of the case when using the document camera. Extend or retract the camera arm to adjust the height of the camera head. The security slot is compatible with the Kensington MicroSaver security system.
Power indicator USB terminal (type B) This indicator comes on when power is supplied from a projector or computer. This terminal is used to connect the unit to a projector or computer using the supplied USB cable. Camera Head 6 Name Image rotation dial Function Turn this dial to rotate the displayed image ±90°. Camera lens This lens captures the image. LED lamp Turn on this lamp when there is not enough light on your document.
Connecting to a Projector to Display Images Connect the document camera to a projector using the USB cable that is supplied with the unit. For information on the projectors that can be connected, see the User's Guide supplied with the projector. Procedure A Extend the foot, and then hold the base and raise the camera head. Caution vThe document camera will not operate properly if a USB hub is used. Connect the projector directly to the unit.
D To display using the document camera, connect the supplied USB cable (3.0 m) to the USB terminal (type A) identified by the projector. Document Camera icon on the Connecting to a Projector through a Computer For information on connecting to a computer, see “Connecting to a Computer to Display Images” on page 9. Displaying Images Displaying an Image of Printed Documents and Other Materials Procedure A B C 8 Place the document you want to display directly under the camera lens.
Displaying Live Action or an Image from a Whiteboard Procedure A Turn the camera head to display live action or an image from a whiteboard or wall. B If you want to rotate the image, turn the image rotation dial. Connecting to a Computer to Display Images To connect the document camera to a computer, you must install the included ArcSoft Application software for ELPDC06. When the software is installed, the computer can be used to operate the document camera and capture images.
Using the ArcSoft Application software for ELPDC06 This section explains how to operate the unit when it is connected to a computer. In the following explanations, unless otherwise noted, Windows screen shots are used. However, the screens will be similar even when using Macintosh. Installing the Software Note the following points before installing the software: v Quit all programs that are currently running before installing the software.
For Macintosh A Turn on the computer. B Insert the CD-ROM into the computer. C Double-click the "ArcSoft Application software for ELPDC06" icon in the EPSON window. Installation starts. D When the installation complete screen appears, click "Finish". ELPDC06 Button Manager must also be installed. Do not clear the check box. E Install ELPDC06 Button Manager. When you see the license agreement, click "Yes". F Follow the instructions to install the software.
Uninstalling the Software Procedure For Windows Click "Add or Remove Programs" or "Uninstall a program" in "Start" - "Settings" "Control Panel" and delete the ArcSoft Application software for ELPDC06. For Macintosh From "Applications", delete the ArcSoft Application software for ELPDC06 folder. Saving Displayed Images When the unit is connected to a computer, images can be captured and displayed as a slide show.
C The capture screen appears. See the table below for details on using the capture screen. This screen consists of two windows: the capture album window and the capture preview window . In the capture screen, you can use the document camera to capture still images or videos. To return to the start screen, click the button. If the unit is not connected, an error message will appear in the capture window. Connect the unit to the computer and click the button.
■ Using the capture screen Returns to the start screen. Switches to the editing screen. Specifies the file format and resolution for captured images. Displays and changes the detailed settings and properties for the camera. Enlarges the image to fit the computer screen. To cancel the full screen mode, press the Esc key or click the button. Connects and disconnects the unit each time this button is clicked. Displays or hides the capture album window.
Editing Saved Images Procedure A Start the ArcSoft Application software for ELPDC06. Click "Start" - "Programs" (or "All Programs") - ArcSoft Application software for ELPDC06. B The start screen appears. Click "Edit" . C The editing screen appears and the saved images are displayed. The editing screen includes functions to correct captured photos and videos, and the edited files can be saved to a computer hard disk. To return to the start screen, click the button.
Reverse Reverses the image left to right. Undo/redo Undo your last action or redo the last action you undid. Changes the size of the selected photo. In the displayed window, enter the dimensions for the width and height of the photo or click "Keep Aspect Ratio". Deletes unwanted parts of an image. Specify a rectangular or square area using the crop tool. Once the area is specified, the surrounding area will become dark. Plays and pauses the recorded video.
Appendix Solving Problems Problem No image appears The image is out of focus Solution Check that the USB cable is connected properly and that the power indicator is on. Make sure that the document (subject of the image) is not too close to the camera lens. The auto focus may not be able to focus in the following situations. Press the [Focus] button again.
Technical Specifications Unit Specifications Interface Power consumption Dimensions When unfolded (mm) When folded (mm) Weight Operation elevation Operation temperature range Storage temperature range Camera Specifications Output resolution Sensor resolution Image capture area When connected to a projector When connected to a computer USB terminal (type B) USB 2.0 * Maximum 2.5 W W 260 × D 76 × H 388 (W10.2 × D3.0 × H15.3 in.) W 260 × D 76 × H 60 (W10.2 × D3.0 × H2.4 in.) 0.9 kg (1.
Software Operating Environment The supplied software is able to operate on computers meeting the following conditions. Compatible operating systems Windows XP (32-bit) SP2 or later/Windows Vista (32-bit)/ Windows 7 (32-bit)*/Macintosh OS 10.4.11/10.5 (Apple QuickTime ® 7.2 or later) CPU Pentium 4 1.4 GHz or higher (Windows XP)/Pentium 4 2.4 GHz or higher (Windows Vista/Windows 7)/PowerPC G5 1.
DECLARATION of CONFORMITY According to 47CFR, Part 2 and 15 Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers We: Located at: Tel: Epson America, Inc. 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806 562-290-5254 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device.
WARNING The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification or Declaration of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with this device. If this equipment has more than one interface connector, do not leave cables connected to unused interfaces.