User's Guide

The document camera’s live image is recorded in the internal memory, an
SD card, or a USB drive. If there is more than one save destination, the
priority is as follows: USB drive > SD card > the internal memory. If the
save destination only has a small capacity remaining, the image is saved in
the next destination.
a
• Movies are saved in AVI format. (Motion JPEG+PCM)
• You can record up to 2GB for each file.
a
Insert an SD card face-up or connect a USB drive, if needed.
a
When you store images on a USB drive, make sure you set
Function > USB Mode to Application.
b
Display the live camera image you want to save. Adjust any
settings, as needed.
a
Motor noises by zoom or focus may be picked up by the
internal microphone. Make sure you adjust the zoom or focus
settings before starting a recording, or use an external
microphone to record the audio. s p.40
c
Press the [ ] button to start recording.
a
The elapsed time displayed while recording is not displayed on
the saved image.
d
To stop recording, press the [ ] button again.
a
• If all of the save destinations only have a small capacity
remaining, "The memory is full." is displayed and the image is
not saved.
• If the memory becomes full during recording, the image
recorded up to that point is saved and recording stops.
• Do not disconnect the power cable from the document
camera or remove an SD card or USB drive from the
document camera while recording. Otherwise, the data may
not be saved properly.
Connecting an External Microphone
If you connect an condenser microphone to the document camera, the
audio from the microphone is also recorded along with a movie.
Recording Movies
40