User's Manual

ESC T
Format:
ASCII code: ESC T
Decimal: 27 84
Hexadecimal: 1B 54
Cancel Superscript/Subscript
Comments:
Cancels either superscript or subscript.
ESC - Turn Underlining Mode On/Off
Format:
ASCII code: ESC - n
Decimal: 27 45 n
Hexadecimal: 1B 2D n
Comments:
The following values can be used for n:
1: Mode is turned ON. (The decimal or hexadecimal values 0
0: Mode is turned OFF. and 1 or the ASCII characters “0” or
“1” can be used.)
This mode provides continuous underlining, including spaces.
This command is available in both draft and NLQ.
ESC 4
Select Italic Mode
Format:
ASCII code: ESC 4
Decimal:
27 52
Hexadecimal: 1B 34
Comments:
Causes italic characters to be printed. This command is valid
even if the Epson Extended Graphics character set has been
selected by ESC t or the DIP switch 1-3, but character graphics
cannot be italicized. This command is available in both draft
and NLQ.
Command Summary
8-31