Printer User Manual
Table Of Contents
- ADDENDUM
- FRONT MATTER
- TABLE OF CONTENTS
- ABOUT THIS MANUAL
- INTRODUCTION
- CHAP 1-SETTING UP THE PRINTER
- CHAP 2-PAPER HANDLING
- CHAP 3-USING THE PRINTER
- CHAP 4-SOFTWARE AND GRAPHICS
- CHAP 5-USING THE PRINTER OPTIONS
- CHAP 6-MAINTENANCE
- CHAP 7-TROUBLESHOOTING
- CHAP 8-TECHNICAL SPECIFICATIONS
- CHAP 9-COMMAND SUMMARY
- APPENDIX
- INDEX
- QUICK REFERENCE
Choosing
a
Character Table
Epson Extended Graphics
The Appendix provides the complete italics and Epson Extended
Graphics character tables.
!
CAUTIOb&
Always be sure to turn off the printer before
you change a DIP switch setting. After you set the DIP
switches, turn on the printer to initialize the
new
settings.
Notes:
l The
ESC
6 command tells the printer to print hex codes
80
to
9F
and
FF
as characters-and the
ESC
7
command tells the
printer to use these hex, codes as control codes. See the
Command
Summary in
Chapter
9.
l In
IBM
emulation mode (which is selected when DIP switch
l-4
is on), DIP switch 1-3 is used to select or cancel the auto
line feed feature.
information on using IBM emulation
mode, see the Appendix.
3-50
Using the
Printer