Printer User Manual
Table Of Contents
- ADDENDUM
- FRONT MATTER
- TABLE OF CONTENTS
- ABOUT THIS MANUAL
- INTRODUCTION
- CHAP 1-SETTING UP THE PRINTER
- CHAP 2-PAPER HANDLING
- CHAP 3-USING THE PRINTER
- CHAP 4-SOFTWARE AND GRAPHICS
- CHAP 5-USING THE PRINTER OPTIONS
- CHAP 6-MAINTENANCE
- CHAP 7-TROUBLESHOOTING
- CHAP 8-TECHNICAL SPECIFICATIONS
- CHAP 9-COMMAND SUMMARY
- APPENDIX
- INDEX
- QUICK REFERENCE
Paper Cutter
3.
4.
5.
Close the paper separator cover and open the top cover.
Hold the paper cutter by its handle with the connector facing to
the right. Then lower the paper cutter into the space
at.
the back
of the printer, guiding the pins on the sides of the paper cutter
into the notches in the printer.
After the paper cutter is in place, tilt the paper cutter handle
forward. Then close the top cover.
Using the Printer Options
5-21