Printer User Manual

Epson ESUP Commands Arranged by Topic
Word processing
ESCa
Format:
Select Justification
ASCII code:
ESC
n
Decimal:
27 9"7 n
Hexadecimal: 1B 61 n
Comments:
The following values can be used for n:
0: Selects left justification.
1: Selects centering.
2: Selects right justification.
3: Select0 full justification.
The default setting is n-0. Full justification (n-3) is performed
when the buffer Becomes full or when a CR, VT, LF, or FF
command is received. The commands DEL and BS are invalid in
n =3 mode. For n =3 there must be m carriage, returns within a
x=wwvh.
ESC SP (space)
Format:
Set Intercharacter Space
ASCII code:
ESC SP n
Decimal: 27 32 n
Hexadecimal: 1B 20 n
Comments:
Set the amount of space added to the right of each character in
addition to the space already allowed in the design of the
character. The number of units of space is equal to
n, which
should be from 0 to 127. Each unit of space is 1/12Oth of an
inch.
Command Summary
9-33