Printer User Manual
Table Of Contents
- ADDENDUM
- FRONT MATTER
- TABLE OF CONTENTS
- ABOUT THIS MANUAL
- INTRODUCTION
- CHAP 1-SETTING UP THE PRINTER
- CHAP 2-PAPER HANDLING
- CHAP 3-USING THE PRINTER
- CHAP 4-SOFTWARE AND GRAPHICS
- CHAP 5-USING THE PRINTER OPTIONS
- CHAP 6-MAINTENANCE
- CHAP 7-TROUBLESHOOTING
- CHAP 8-TECHNICAL SPECIFICATIONS
- CHAP 9-COMMAND SUMMARY
- APPENDIX
- INDEX
- QUICK REFERENCE
IBM Emulation Mode Commands Arranged by Topic
Nutts:
l The
FF
command does not work at the top of form position
when DIP switch
2-l
is off in IBM emulation mode.
l IBM emulation mode graphics are the
,same
as Epson ESC/P
mode graphics except that
ESC
*
,
ESC
7,
and
ESC
A
are not
amdablt.
Commands that
differ
from Epson
,ESC/P
commands
Rinttr
ojrwation:
ESC
Q22
Deselect Printer
Format:
ASCII code:
ESC
Q
22
Decimal:
27
81
22
Hexadecimal:
1B
51
16
Comments:
Takes the printer off line until you turn the printer off and then
back on or until the printer receives a
DC1
code.
Vertical
motion:
ESC
2
Select Programmable Line Spacing
Format:
ASCII code:
ESC
2
Decimal
:
27
50
Hexadecimal:
1B
32
Comments:
Executes the line spacing stored in memory by
ESC
A. If no
ESC
A command has been sent,
ESC
2 sets the line spacing to
l/6
of
an inch.
9-42
Command Summary