Printer User Manual
Table Of Contents
- ADDENDUM
- FRONT MATTER
- TABLE OF CONTENTS
- ABOUT THIS MANUAL
- INTRODUCTION
- CHAP 1-SETTING UP THE PRINTER
- CHAP 2-PAPER HANDLING
- CHAP 3-USING THE PRINTER
- CHAP 4-SOFTWARE AND GRAPHICS
- CHAP 5-USING THE PRINTER OPTIONS
- CHAP 6-MAINTENANCE
- CHAP 7-TROUBLESHOOTING
- CHAP 8-TECHNICAL SPECIFICATIONS
- CHAP 9-COMMAND SUMMARY
- APPENDIX
- INDEX
- QUICK REFERENCE
IBM Emulation Mode Commands Arranged by Topic
Horizontal
motion:
ESC
D
Set Horizontal Tabs
Format:
ASCII code:
ESC
D
nl
n2
.
.
.
.
. 0
Decimal
:
27
68
nl
n2
.
.
.
.
. 0
Hexadecimal:
1B
44
nl
n2
.
.
.
.
.
00
Comments:
This command allows setting of up to
28
horizontal tabs, which
are entered as
nl,
n2,
n3,
etc. (from 1 to
137)
with the 0
character terminating the command. The tab settings must be
entered in
ascending
order.
ESC
D 0 clears all tabs. The tab
settings on power up are every eight characters. The tab positions
change if the character
sizt
is
changed. Only double-wide mode
does not affect the tab positions.
ESC
R
Restore Default Tab Settings
ASCII code:
ESC
R
Decimal:
27
82
Hexadecimal:
1B
52
Comments:
Resets all vertical and horizontal tab settings (set by
ESC
B
and
ESC
D)
to their defaults.
Command Summary
9-45