Printer User Manual
Table Of Contents
- ADDENDUM
- FRONT MATTER
- TABLE OF CONTENTS
- ABOUT THIS MANUAL
- INTRODUCTION
- CHAP 1-SETTING UP THE PRINTER
- CHAP 2-PAPER HANDLING
- CHAP 3-USING THE PRINTER
- CHAP 4-SOFTWARE AND GRAPHICS
- CHAP 5-USING THE PRINTER OPTIONS
- CHAP 6-MAINTENANCE
- CHAP 7-TROUBLESHOOTING
- CHAP 8-TECHNICAL SPECIFICATIONS
- CHAP 9-COMMAND SUMMARY
- APPENDIX
- INDEX
- QUICK REFERENCE
Using the Two-Tractor System
9..
Slide the right sprocket unit so that the paper is straight and has
no wrinkles. Then lock the sprocket unit in place by pushing the
sprocket lock lever up.
CAUTION: Be sure the sprocket units are not too far apart.
If they pull your paper too tightly or tear the edges of the paper
holes, a paper jam may result. To remove any excess
tension
in your paper, release the right sprocket
and
lock it again.
10.
Close the front cover. The paper is now loaded to the standby
position.
2-8 Paper Handling