Printer User Manual
Table Of Contents
- ADDENDUM
- FRONT MATTER
- TABLE OF CONTENTS
- ABOUT THIS MANUAL
- INTRODUCTION
- CHAP 1-SETTING UP THE PRINTER
- CHAP 2-PAPER HANDLING
- CHAP 3-USING THE PRINTER
- CHAP 4-SOFTWARE AND GRAPHICS
- CHAP 5-USING THE PRINTER OPTIONS
- CHAP 6-MAINTENANCE
- CHAP 7-TROUBLESHOOTING
- CHAP 8-TECHNICAL SPECIFICATIONS
- CHAP 9-COMMAND SUMMARY
- APPENDIX
- INDEX
- QUICK REFERENCE
Changing the Paper
The following steps describe the procedure for changing paper on
the front tractor, but you can follow the same steps when you
change the paper on the rear tractor. Before you start, make sure
the printer is turned on and the front tractor is selected. (If you are
changing the paper on the rear tractor, the rear tractor should be
selected instead.)
I!!!!!9
WARNING:
Never change paper using the following procedure
if labels are already loaded in the printer. Instead, completely
remove the labels first by tearing off the fresh supply
below
the tractor and pressing the
FORM
FEED or LINE FEED
button to eject the remaining labels. Then load new paper
as described in this chapter,
1.
If the printer is on line, press the ON LINE button to take it off
line.
2-24
Paper
Handling