DM-D110/D210 User’s Manual . . . . . . . . . 1 用户手册 . . . . . . . . . . . . . 11 ユーザーズマニュアル . .
English A 1 2 4 C B 3 6 5 8 7 10 11 9 12 14 13 D 15 16 ii DM-D110/D210
English E F 17 22 18 19 21 20 G 24 23 26 27 28 25 29 30 H 31 32 I 33 34 35 36 DM-D110/D210 iii
English J 90° 48° K 330° 36° L 37 ON 1 2 3 4 5 6 7 8 39 iv DM-D110/D210 38
English M 2 1 1 N 1 2 DM-D110/D210 v
English vi DM-D110/D210
English English DM-D110/D210 User’s Manual Illustrations All of the illustrations are at the beginning of this manual. They are identified by letters (A, B, C . . .). Some of the illustrations have numbers in them. See the list below for the meaning of the numbers. Illustration A: 1. Screen 2. DM-D110 3. DIP switch (rear side of the display) 4. POWER switch (bottom of the display) 5. Stand (DP-110) Illustration B: 6. Plate Illustration C: 7. Power Supply Connector 8. DM-D110 Cable 9.
English All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein.
English FCC Compliance Statement For American Users This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
English The horizontal rotating angle of the screen unit is limited by a stopper. Do not apply excess force to rotate the screen unit past the limit set by the stopper. Doing so may cause damage. When you are attaching and detaching the cable, always check that the power switches of the customer display and the unit that it is connected to are turned off. Take care when handling the customer display not to drop or knock it because it has a built-in fluorescent display tube.
English Precautions when Installing ❏ ❏ ❏ Ensure that the power switches of the customer display and the device that it is connected to are turned off before connecting the cable. The RS-232 connector of the stand (DP-110/210) is fitted with inch screws (hex nuts). Replace these with the included metric screws if you need metric screws. The inch screws and metric screws can be distinguished by the presence or lack of grooves (see Illustration H).
English Self Test A self-test function is built into the DM-D110 and DM-D210. Execution of the selftest function can be configured using the DIP switches. Self-Test Items The self-test performs the following steps. ❏ Displays the version of the firmware ❏ Displays the configuration of the DIP switches ❏ Displays the configuration of the memory switches ❏ Introduces the display text ❏ Introduces each of the functions (brightness, blinking, scrolling, etc.
English Transfer Speed Switching SW1-5 SW1-6 SW1-7 Transfer Speed (bps) 2400 ON ON ON OFF ON ON 4800 ON OFF ON 9600*1 OFF OFF ON 19200*2 ON ON OFF 38400 OFF ON OFF 57600 ON OFF OFF 115200 OFF OFF OFF (Reserved) *1 Default Setting *2 Setting that is used when connecting to the USB model of the EPSON TM printer. Jumper There are jumpers in the stand (DP-110/210) that configure whether a TM printer is connected to the DM-D110/210.
English DM-D210 See Illustration G for the location of the jumpers. JP1 JP2 Details 1-2 1-2 Use this setting if you are connecting and using both the TM printer and this device. (Default Setting) 2-3 2-3 Use this setting if you are using the DM-D stand in a stand-alone configuration without connecting a TM printer.
English DM-D210 Model DM-D210 DM-D210 + DP210 Display type Number of characters displayed 40 characters (20 columns × 2 rows, 5 × 7 dot matrix) Display color Green (505 nm) 700 cd/m2 Brightness Character classes Alphanumeric: 95 characters International characters: 37 characters Graphic characters: 128 characters × 12 pages Character composition 5 × 7 dot matrix, comma/period/annunciator Character size 6.5 × 11.3 mm Character pitch Interface 9.
English 10 DM-D110/D210 User’s Manual