Installation guide

18 DM-D210 Installation Guide
English
Assembling using Velcro tapes
1. Attach Velcro tapes to the bottom of
fixing plate A as shown in
illustration 53.
2. Pass the cable for the DM-D210
through support C, and attach
support C to the DM-D210 as shown in illustration 54. When
using support B for extension, insert the tab on support B into
the hole on support C as shown in illustration 55 until you feel
it click.
52
fixing plate A
Velcro tapes Velcro tapes
support B
(for extension)
support C
fixing screws for
wood position
53
when using support B
for extension
54 55