Installation guide

6 DM-D210 Installation Guide
English
Assembling
1. Pass the cable for the DM-D210 through support C, and attach
support C to the DM-D210 as shown in illustration 10. When
using support B for extension, insert the tab on support B into
the hole on support C as shown in illustration 11 until you feel
it click.
2. Attach the base to the setting position on
the TM printer, and secure it with the
screws as shown in illustration 12.
3. Pass the cable for the DM-D210 through the
base as shown in illustration 13.
when using support B
for extension
10 11
12
13