User`s guide

Two Connection Modes

There are two methods of connecting a computer and the projector via a

network by using EasyMP Network Projection.

Advanced Connection Mode

Advanced Connection Mode is an infrastructure connection, and

connects to an existing network system via a network cable.

When connecting to a network via Wired LAN, connect the projector to

the network hub with a commercially available LAN cable.

If you install the optional Wireless LAN unit in the projector, you can

connect to the network via a wireless LAN access point.

Quick Connection Mode (Only when the optional

Wireless LAN unit is installed)

Quick Connection Mode is only available when you install the optional

Wireless LAN unit in the projector.

Quick Connection Mode temporarily assigns the projector's SSID to a

computer creating an ad hoc connection, and restores the computer's

network settings after disconnecting.s p.12

• You can easily connect to a computer and project images from the

computer without making network settings.

• This lets you connect easily without a connector cable, and you can

even connect if the projector and the computer are at remote locations.

Steps for Connecting

Use the following steps to connect the computer to the projector and

project in EasyMP Network Projection.