User`s guide

You can find EasyMP Multi PC Projection on the EPSON Projector
Software CD-ROM. Install the software on the computer you are using.
Software Requirements
EasyMP Multi PC Projection runs on computers that meet the following
requirements.
For Windows
OS The following 32 bit OS versions:
Windows XP Service Pack 2 or later
Windows Vista
Windows Vista Service Pack 1 or later
Windows 7
CPU Mobile Pentium III 1.2 GHz or faster
Recommended: Pentium M 1.6 GHz or faster
Amount of Memory 256 MB or more
Recommended: 512 MB or more
Hard Disk Space 20 MB or more
Display Resolutions greater than XGA (1024x768), or less
than UXGA (1600x1200)
Display color: 16 bit color (display color approx.
32,000 colors)
For Mac OS
OS Mac OS X 10.4.x
Mac OS X 10.5.1 or later
*
Mac OS X 10.6.x
CPU PowerPC G3 900 MHz or faster
Recommended: Core Duo 1.5 GHz or faster
Amount of Memory 256 MB or more
Recommended: 512 MB or more
Hard Disk Space 20 MB or more
Display Resolutions greater than XGA (1024x768), or less
than UXGA (1600x1200)
Display color: 16 bit color (display color approx.
32,000 colors)
* Operation is not guaranteed in Mac OS X 10.5.0 because the Firewall settings
are not set correctly when the version is updated.
Installing
Make sure you check the following points before starting installation.
• Close all running applications before starting installation.
• When the language selected for the installation varies from that of the
OS being used, the screens may not be displayed correctly.
For Windows
a
You need administrator authority to install EasyMP Multi PC
Projection.
a
Turn on your computer.
b
Insert the EPSON Projector Software CD-ROM into your computer.
c
The installer starts automatically.
a
If the installer does not start automatically, open the CD-ROM
drive from My Computer (or Computer), and then double-
click InstallNavi.
Installing the Software
6