User`s guide

You can use the following methods to connect a computer to a projector
over a network by using EasyMP Network Projection.
Related Links
• "Introduction to EasyMP Network Projection" p.4
• "Quick Connection Mode" p.8
• "Advanced Connection Mode" p.8
Quick Connection Mode
You can connect the projector and the computer directly using wireless
communication. This allows you to project the computer screen without
making any complicated network settings.
Quick Connection Mode is only available when you install the wireless LAN
unit on the projector.
Related Links
• "Connection Modes" p.8
• "Setting Up a Projector to Connect in Quick Connection Mode"
p.14
• "Connecting the Projector and a Computer Directly Using Wireless
Communication" p.18
Advanced Connection Mode
You can connect the projector and the computer using an existing network
system. To use Advanced Connection Mode, you need to connect the
projector to an access point or to a network hub.
Related Links
• "Connection Modes" p.8
• "Setting Up a Projector to Connect in Advanced Connection Mode
(Wireless)" p.14
• "Setting Up a Projector to Connect in Advanced Connection Mode
(Wired)" p.15
• "Connecting the Projector and a Computer over a Network System
(Wireless)" p.20
• "Connecting the Projector and a Computer over a Network System
(Wired)" p.21
Connection Modes
8