Specifications

Drag the displayed monitor icon and place it where desired.

Here, the actual monitor (1) is placed on the left, while the

virtual monitor (3) is placed on the right.

When the computer has multiple display output terminals, the

numbers assigned to the virtual terminals will be sequential to

those of the physical terminals.

• When an external monitor is connected as a secondary monitor,

the image for that screen cannot be projected.

• Depending on the hardware, the number of the secondary

monitor may be other than "2". When the monitor icon is

displayed on the screen, click the icon and confirm that the

monitor type shown under "Display" is other than "secondary".

• For Screen Resolution settings, see the following.s p.52

When the monitor icon is arranged, a virtual display is connected

as the image like below.

Click the "OK" button. The Display Properties screen closes.

Up to this point, the virtual display layout has been fixed.

Allocate the projecting images next.

s p.26

For Macintosh

Start EasyMP Network Projection. Double-click the

Applications folder of the hard drive volume in which

EasyMP Network Projection is installed, and then

double-click the EasyMP Network Projection icon.

Select Advanced Connection Mode and then perform startup.

Select the "Use multi-display" check box.

Display layout and Display preferences are added at the bottom of

the screen.

Using Multi-Screen Display