Operation Manual

Projector Setup Settings - ECO Menu
145
Setting Options Description
Port Selects the port to use from Wired LAN
or Wireless LAN while the Standby
Mode setting is set to Communication
On.
Standby Mode ** Communication
On
Communication
Off
Communication On indicates that the
projector can be monitored over a
network when the projector is in standby
mode. Enable this setting to allow the
following operations to occur when the
projector is in standby mode:
• Monitor and control the projector over
a network
Communication On is automatically
selected when A/V Output is set to
Always On.
s Extended > A/V Settings > A/V
Output
ECO Display On
Off
Displays a leaf icon in the bottom left
corner of the projected screen to indicate
the power-saving status when the lamp
brightness changes (when On).
Reset — Resets all adjustment values on the ECO
menu to their default settings, except for
Standby Mode.
* Available only for
EB‑2247U/EB‑2142W/EB‑2042/EB‑990U/EB‑980W/EB‑970/EB‑109W/EB‑108/
EB‑107/EB‑W39/EB‑X39.
** Available only for EB‑S39.
a
• When the Sleep Mode Timer setting is enabled, the lamp dims for a
short time before the timer limit is reached and the projector turns
off.
• When the Lens Cover Timer or A/V Mute Timer settings are
enabled, the lamp uses less power when the lens cover is closed or
A/V Mute is activated.
gg Related Links
• "Projector Setup Settings - Extended Menu" p.131