User`s guide

Automatically Adjust to Fit the Screen Frame -
Screen Fit - (EB-1775W only)
Screen Fit is a function that corrects the projected image so that it aligns
with the frame (outer border) of the screen, white board, and so on. By
pressing the [Screen Fit] button on the remote control or the control panel,
the projected image is adjusted to fit the screen, and keystone correction
and focus adjustments are performed automatically.
The following conditions are necessary to correct the projected image using
Screen Fit.
Screen size: less than or equal to 100"
Distance between projector and screen: approx. 1.0 to 2.5 m
Correction angle: approx 20˚ right and left/approx. 30˚ up and down
a
• If you exceed the above mentioned range, the projected image
cannot be corrected properly. Correct the projected image manually.
• Screen Fit does not function if the projector is suspended from a
ceiling. Correct the projected image manually.
a
Press the [Screen Fit] button on the remote control or the control
panel during projection.
Using the remote control Using the control panel
Adjusting Projected Images
31
Downloaded From projector-manual.com Epson Manuals