User`s guide

Submenu Function
Operation
Direct Power On: Set to On to turn on the projector
simply by plugging it in.
When the power cable is plugged in, note that the projector
turns on automatically in cases such as a power outage
being restored.
Sleep Mode: When set to On, this automatically stops
projection when no image signal is being input and no
operations are carried out.
Sleep Mode Timer: When Sleep Mode is set to On, you
can set the time before the projector automatically turns off
within a range of 1 to 30 minutes.
Lens Cover Timer: When set to On, this turns off the
power automatically 30 minutes after the A/V mute slide is
closed.
This is set to On by default.
High Altitude Mode: Set to On when using the projector
above an altitude of 1500 m.
Standby Mode
You can use network monitoring and control functions
while the projector is in standby mode when this is set to
Communication On. (EB-1775W/EB-1770W/EB-1760W
only)
You can monitor and control the status of the projector
over the network by using
SNMP g , or by using the
EasyMP Monitor software.
s "Useful Software" p.109
USB Type B
Set to USB Display when the projector and a computer are
connected by a USB cable and computer images are
projected.
s "Projecting with USB Display" p.28
Set to Link 21L to operate the mouse pointer by remote
control.
s "Using the Remote Control to Operate the Mouse
Pointer (Wireless Mouse)" p.54
Link 21L
Set to On to use the Link 21L utility software.
Submenu Function
Projector ID
Set the ID for the projector to a number between 1 and 9.
Off indicates that no ID is set.
s "Setting the Projector ID" p.57
Multi-screen
You can adjust the hue and brightness of each projected
image when multiple projectors are lined up and projecting.
Adjustment Level: You can adjust from black to white in
five stages called Level 1 to 5, and in each of these 5 levels,
you can adjust Brightness Correct. and Color Correct.
Brightness Correct.: You can correct the difference in the
brightness of each projector.
Color Correct. (G/R) / Color Correct. (B/Y): You can
correct the difference in the color of each projector.
s "Correcting Color when Projecting from Multiple
Projectors" p.58
Language
You can set the language for messages and menus.
Reset
You can reset the adjustment values for Display
*1
and
Operation
*2
from the Extended menu to their default
settings.
See the following to return all menu items to their default
settings.
s "Reset Menu" p.84
*1When User's Logo Protect is set to On in Password Protect, settings related
to user's logo cannot be changed. You can make changes after setting User's
Logo Protect to Off.
s "Managing Users (Password Protect)" p.62
*2 Except for High Altitude Mode.
List of Functions
75
Downloaded From projector-manual.com Epson Manuals