User`s guide

Submenu Function

Trap IP Address

1/Trap IP Ad‐

dress 2

You can register up to two IP addresses for the SNMP trap

notification destination. You can enter a number from 0 to 255 in

each field of the address. However, the following IP addresses

cannot be used. 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x

is a number from 0 to 255)

AMX Device Dis‐

covery

When the projector is connected to a network, set this to On

when you want to allow the projector to be detected by

AMX

Device Discovery

. Set this to Off if you are not connected to an

environment controlled by a controller from AMX or AMX

Device Discovery.

Reset menu

Resets all of the network settings.

Submenu Function

Reset network

settings.

To reset all of the Network settings, select Yes.

List of Functions

Downloaded From projector-manual.com Epson Manuals