Operation Manual

Standby Select for connecting.
Busy Select for connecting. When you click
Connect, the computer currently
connected is disconnected and your
computer is connected.
Busy (Disable
interrupt con-
nection)
Cannot be selected. Disable interrupt
connection is set on another computer
which is already connected.
Currently in
use by another
application
The projector's Configuration Menu is
open. You can select it after closing the
Configuration menu and running the
search again.
Searching Displayed while running Manual search or
Profile.
Not found. Displayed when a projector cannot be
found as a result of Manual search or
Profile.
D
Projector name
The projector's name is displayed.
E
Disable interrupt connection
Check the box to prevent an interrupt connection by other computers while con-
nected to the selected projector.
F
Use multi-display
Check the box to use the Multi-screen display function. When this is selected,
Display layout and Display properties are displayed at the bottom of the screen.
s p.20
G
Troubleshooting
If there is a problem and you cannot have a connection, press this button to
open the EasyMP Network Projection Troubleshooting screen.
H
Connect
Connect to the projector you selected from the search results list. When a con-
nection is made with a projector, a toolbar is displayed.
I
Set options
You can make general setting options such as the processing method when start-
ing up EasyMP Network Projection. For details, see Set options s p.36
J
Save in the profile
Saves the results of a search for projectors on the network as a Profile.s p.31
K
Clear list
Deletes all search results.
L
IP address
The projector's IP address is displayed.
M
Display
Select the number displayed (when Use multi-display is selected). s p.26
N
Profile
You can search for a projector on the network using a Profile saved us-
ing Save in the profile.s p.31
Connecting to a Projector on a Network and Projecting
15