Operation Manual

By default, this application only searches for projectors on the same
subnet as the computer. Therefore, even if you perform a search for
projectors on the network, ones on a different subnet will not be found.
You can, however, identify and connect to a projector on a different
subnet as follows:
• Specify either an IP address or Projector Name and perform a search.
The IP Address can be input directly. Also, provided the Projector
name to be connected has been registered on the DNS server, you
can perform a search simply by inputting that Projector name.
s
p.30
• Performing a search based on a Profile
Once you have performed a search for a projector on a different
subnet by specifying either an IP Address or a Projector name, you
can save the search as a Profile with an easy-to-remember name, and
then use that Profile whenever you subsequently want to search for a
projector on a different subnet.
s p.31
Connecting to a Projector on a Different Subnet
29