Operation Manual

Projecting all Image Files in a Folder in
Sequence (Slideshow)
You can project the image files in a folder in sequence, one at a time.
This function is called Slideshow. Perform the Slideshow by the
following procedure.
q
To change files automatically when you run Slideshow, set the
Screen switching time in the Slideshow Option menu to anything
other than No. The default setting is No.
s
p.50
Procedure
A Start Slideshow.s p.45
The file list screen is displayed.
B Use the [ ][ ][ ][ ] buttons to position the
cursor over the folder for the Slideshow that you want to
run and press [Enter].
C Select Slideshow from the file list screen, and then press the
[Enter] button.
The Slideshow starts and the image files in the folder are
automatically projected in sequence, one at a time.
When the last file is projected, the file list is displayed again
automatically. If you set Continuous Play to On in the Option
window, projection will start from the beginning again when the
end is reached.
s
p.50
You can proceed to the next screen, return to the previous
screen, or stop playback during the projection of a Slideshow.
q
If the Screen switching time setting on the Option screen has been
set to No, the files will not change automatically when you Play
Slideshow. Press the [Enter] button or the [Page] (Down) button
on the Remote Control to continue to the next file.
Projecting Image Files
49