Operation Manual

Check Remedy
Is the firewall turned off, or has the firewall been registered as an
exception?
When you do not wish to turn off the firewall or register the firewall as an exception, make the necessary settings
to open the ports.
The ports used by EasyMP Network Projection are "3620", "3621", and "3629".
Is the network cable connected correctly? Check that the network cable is connected correctly. Reconnect it if it is not connected or not connected properly.
Cannot connect in Advanced Connection Mode
Check Remedy
Are the connection denial functions, such as
MAC Address g
restrictions and port restrictions, set correctly at the access point?
Set the projector to allow connections from the access point.
Are the IP address, the Subnet Mask, and the Gateway Address
for the access point and the projector set correctly?
When not using a DHCP, adjust each setting.s User's Guide "Network Menu (for EB-1920W/1910/1830)"
Are the access point and the projector's subnet different? Select Manual search from EasyMP Network Projection, specify the IP address, and connect.
s p.30
The Slide Show cannot be displayed on the desired display when the multi-screen display function is being executed.
Check Remedy
Are you using PowerPoint 2002 or an earlier version?
For Windows
To set and use two or more virtual displays g , use PowerPoint 2003 or later, or limit the number of virtual
displays to one before displaying the Slide Show.
Applications are no longer displayed from the computer screen when the multi-screen display function is executed.
Check Remedy
Is another application running on the
virtual display g ?
For Windows
When EPSON Virtual Display is installed, another application sometimes runs on the virtual display. In this case,
set EPSON Virtual Display to "Off" in "Screen properties".
Troubleshooting
56