Operation Manual

Error message when starting up EasyMP Network Projection
Error Messages Remedy
Connection to the projector failed. Try to connect again. If it still does not connect, check the network settings on the computer and the network
settings for the projector.
For details on the network settings to be made on the projector, see s User's Guide "Network Menu (for EB-1920W/
1910/1830)"
The keyword does not match. Re-enter the keyword displayed on
the projector screen.
Check the Projector keyword displayed on the LAN standby screen, and enter the Projector keyword.
The selected projector is busy. Do you want to continue the
connection process?
You tried to connect to a projector that is connected to another computer.
When the Yes button is clicked, it connects to the projector. The connection between the projector and the other
computer is cut off.
When the No button is clicked, it does not connect to the projector.
The connection between the projector and the other computer is maintained.
EasyMP Network Projection initialization failed. Restart EasyMP Network Projection. If the message still appears, uninstall and then reinstall EasyMP Network
Projection.
s
p.7
Connection failed due to keyword mismatch. When connecting to a projector for which a Projector keyword has been set, the wrong Projector keyword is entered.
Check the Projector keyword that is displayed on the projector's connection standby screen. After the connection
is disconnected and then reconnected, enter the Projector keyword on the keyword entry screen that is displayed.
s p.13
Network adapter information could not be obtained. Check the following point.
Is a network adapter installed on the computer?
Is the driver for the network adapter used installed on the computer?
After checking, restart the computer and connect again.
If you still cannot connect, check the following.
Check the network settings on the computer and the network settings on the projector.
For details on the network settings to be made on the projector, see s User's Guide "Network Menu (for EB-1920W/
1910/1830)"
One or more connected projectors do not support resolutions
greater than SXGA. Reduce the screen resolution and reconnect.
There is an ELP-735 projector in the connection destination. Change the computer screen resolution to SXGA
(1280x1024) or less.
Troubleshooting
58