User’s Guide
Notations Used in This Guide • Safety indications The documentation and the projector use graphical symbols to show how to use the projector safely. Please understand and respect these caution symbols in order to avoid injury to persons or property. Warning This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.
Contents 3 Notations Used in This Guide . . . . . . . . . . . . . . . . . . . . . . . . 2 Preparing the Projector Installing the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Introduction Projector Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Installation Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Installation methods . . . . . . . . . . . . . . . . . . . . .
Contents Gamma Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Selecting the Projection Quality (Selecting Color Mode) . . . . . . . . . . . . . . . Setting Auto Iris . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changing the Aspect Ratio of the Projected Image . . . . . . . . . . . . . . . . . . Changing methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Changing the aspect mode . . . . . . . . .
Contents Basic menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wired LAN menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mail menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Others menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reset menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 Projector General Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 General Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction This chapter explains the projector's features and the part names.
Projector Features Quick and Easy Set up, Projection, and Storage • • • • Turn the projector on and off by simply plugging in or unplugging. Project onto large screens from a short distance. Make easy height adjustments with one lever. No cool down delay makes it easy to put away. 8 Horizontal keystone adjuster This allows you to quickly correct horizontal distortion in the projected image. This is useful if you cannot install the projector parallel to the screen. s "Correcting manually" p.
Projector Features Increasing projection content in wide (WXGA) screen (EB-1940W only) With a computer that has a 16:10 WXGA wide LCD display, the image can be projected in the same aspect. You can use whiteboards and other landscape format screens. s "Changing the Aspect Ratio of the Projected Image " p.44 9 Connect a USB storage device and project PDFs, movies, and images (Slideshow) You can connect USB storage devices or digital cameras to the projector and project saved images.
Projector Features s "Selecting the Projection Quality (Selecting Color Mode)" p.43 10 You can download "Epson iProjection" for free from the App Store. Any fees incurred when communicating with the App Store are the responsibility of the customer. Precise color adjustments You can adjust the image's absolute color temperature and the strength of each RGB color. You can also adjust the hue, saturation, and brightness of each RGBCMY to obtain color matching in superior detail. s "Adjusting the Image" p.
Part Names and Functions 11 Front/Top Name A Air exhaust vent Function Name Function E Front adjustable foot When setup on a surface such as a desk, extend the foot to adjust the position of the image. s "Adjusting the Image Position" p.40 F A/V mute slide Close when not using the projector to protect the lens. By closing during projection you can hide the image and the sound. s "Hiding the Image and Sound Temporarily (A/V Mute)" p.61 G Focus ring Adjusts the image focus.
Part Names and Functions 12 Name Rear Name I RS-232C port When controlling the projector from a computer, connect it to the computer with an RS-232C cable. This port is for control use and should not normally be used. s "ESC/VP21 Commands" p.78 J LAN port Connects a LAN cable to connect to a network. K Remote receiver Receives signals from the remote control. L Security slot The security slot is compatible with the Microsaver Security System manufactured by Kensington. s "Anti-Theft Lock" p.
Part Names and Functions 13 Base Name Function A Ceiling mount fixing points (three points) Attach the optional Ceiling Mount here when suspending the projector from a ceiling. s "Installing the Projector" p.20 s "Optional Accessories" p.128 B Rear feet When setup on a surface such as a desk, turn to extend and retract to adjust the horizontal tilt. s "Adjusting the Horizontal Tilt" p.
Part Names and Functions 14 Name Control Panel Function E [Help] button Displays and closes the Help screen which shows you how to deal with problems if they occur. s "Using the Help" p.102 F [Esc] button • Stops the current function. • If pressed when the Configuration menu is displayed, it moves to the previous menu level. s "Using the Configuration Menu" p.85 Name • Adjusts the speaker volume. [b] Increases the volume. [a] Decreases the volume. s "Adjusting the Volume" p.
Part Names and Functions Remote Control 15 Name Function A [t] button Turns the projector power on or off. s "From Installation to Projection" p.30 B [Computer] button Each time you press the button, the image displayed changes between the Computer1, Computer2, and the DisplayPort ports. C [Video] button Each time the button is pressed, the image displayed changes between the Video input port and HDMI input port. D Numeric buttons • Enter the Password. s "Setting Password Protect" p.
Part Names and Functions Name J [ ] button K [User] button L [Page] buttons [[][]] 16 Function • When the Configuration menu or the Help screen is displayed, it accepts and enters the current selection and moves to the next level. s "Using the Configuration Menu" p.85 • Acts as a mouse's left button when using the Wireless Mouse function. s "Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse)" p.
Part Names and Functions Name 17 Function Replacing the remote control batteries U [ID] button Hold down this button and press the numeric buttons to select the ID for the projector you want to operate using the remote control. s "Setting an ID and using the remote control" p.65 V [Color Mode] button Each time the button is pressed, the Color Mode changes. s "Selecting the Projection Quality (Selecting Color Mode)" p.43 W [LAN] button Switches to the image from the network connected device.
Part Names and Functions 18 Remote control operating range 8 8 8 8 Caution Check the positions of the (+) and (-) marks inside the battery holder to ensure the batteries are inserted the correct way. If the batteries are not used correctly, they could explode or leak causing a fire, injury, or damage to the product. c Replace the battery cover. Press the battery compartment cover until it clicks into place.
Preparing the Projector This chapter explains how to install the projector and connect projection sources.
Installing the Projector 20 Installation Methods Warning The projector supports the following four different projection methods. Install the projector according to the conditions of the installation location. • Project images from in front of the screen. (Front projection) • Project images from behind a translucent screen. (Rear projec‐ tion) • Suspend the projector from the ceiling and project images from in front of a screen.
Installing the Projector • Install the projector so that it is parallel to the screen. If the projector is installed at an angle to the screen, keystone distortion occurs in the projected image. 21 Screen Size and Approximate Projection Distance Projection size is determined by the distance from the projector to the screen. See the illustrations on the right to select the best position according to the screen size. The illustrations show the approximate shortest distance at maximum zoom.
Installing the Projector 4:3 Screen Size For EB-1960/EB-1950/EB-1930 22
Connecting Equipment 23 The port name, location, and connector orientation differ depending on the source being connected. Connecting a Computer To project images from a computer, connect the computer using one of the following methods. A When using the supplied computer cable Connect the computer's display output port to the projector's Computer port.
Connecting Equipment 24 4 4 DisplayPort a • You can use a USB cable to connect the projector to a computer to project images from the computer. This function is called USB Display. s "Projecting with USB Display" p.32 • Some commercially available DisplayPort cables come with a lock. When removing the cable, press the button on the cable's connector section and pull out the cable.
Connecting Equipment 25 C When using a commercially available HDMI cable Connect the HDMI port on the image source to the projector's HDMI port. You can send the image source's audio with the projected image. Attention • If the input source is on when you connect it to the projector, it could cause a malfunction. • If the orientation or shape of the plug differs, do not try to force it in. The device could be damaged or could malfunction.
Connecting Equipment 26 Using the USB cable supplied with the USB device, connect the USB device to the USB(TypeA) port on the projector. When the USB device is connected, you can project files on the USB memory or digital camera using Slideshow. s "Slideshow examples" p.53 Attention • • • • If you use a USB hub, the connection may not operate correctly. Devices such as digital cameras and USB devices should be connected to the projector directly.
Connecting Equipment 27 Connecting External Equipment You can output images and audio by connecting an external monitor or speaker. A When outputting images to an external monitor Connect the external monitor to the projector's Monitor Out port using the cable supplied with the external monitor. B When outputting audio to an external speaker Connect the external speaker to the projector's Audio Out port using a commercially available audio cable.
Connecting Equipment Connecting a LAN Cable Connect a LAN port on network hubs or other equipment to the projector's LAN port with a commercially available 100BASE-TX or 10BASE-T LAN cable. By connecting a computer to the projector over a network, you can project images and check the status of the projector. a To prevent malfunctions, use a category 5 or higher shielded LAN cable.
Basic Usage This chapter explains how to project and adjust images.
Projecting Images 30 From Installation to Projection This section explains the procedure for connecting the projector to a computer with the computer cable and projecting images. e f Turn on your computer. Change the computer's screen output. When using a laptop computer, you need to change the screen output from the computer. Hold down the Fn key (function key), and press the b key. a ON • The method for changing differs depending on the computer being used.
Projecting Images 31 Automatically Detect Input Signals and Change the Projected Image (Source Search) Press the [Source Search] button to project images from the port currently receiving an image. Using the remote control Using the control panel DisplayPort LAN USB USB Display HDMI When two or more image sources are connected, press the [Source Search] button until the target image is projected. When your video equipment is connected, start playback before beginning this operation.
Projecting Images 32 Switching to the Target Image by Remote Control You can change directly to the target image by pressing the following buttons on the remote control. Remote control Projecting with USB Display You can use a USB cable to connect the projector to a computer to project images from the computer. You can project images and send audio with one USB cable.
Projecting Images Display 33 Resolution of no less than 640x480 and no higher than 1600x1200. Display color in 16-bit color or greater *1 Service Pack 4 only For Mac OS X OS Mac OS X 10.5.x 32 bit Mac OS X 10.6.x 32/64 bit Mac OS X 10.7.x 32/64 bit CPU Power PC G4 1GHz or faster Recommended: Core Duo 1.83GHz or faster Amount of Memory 512 MB or more Hard Disk Space 20 MB or more Display Resolution of no less than 640x480 and no higher than 1680x1200.
Projecting Images c d Computer images are projected. It may take a while before computer images are projected. Until computer images are projected, leave the equipment as it is and do not disconnect the USB cable or turn off the power to the projector. Disconnect the USB cable when you finish projection. When disconnecting the USB cable, there is no need to use Safely Remove Hardware. a • If it is not installed automatically, double-click My Computer - EPSON_PJ_UD - EMP_UDSE.EXE on your computer.
Projecting Images For Windows XP a b c Click Start, and then click Control Panel. Double-click Add or Remove Programs. Select Epson USB Display and click Remove. For Windows Vista/Windows 7 a b c Click Start, and then click Control Panel. Click Uninstall a program under Programs. Select Epson USB Display and click Uninstall. For Mac OS X a b Open the Applications folder, double-click USB Display, and then double-click Tool. Run USB Display UnInstaller.
Adjusting Projected Images Correcting Keystone Distortion 36 • Correcting manually (Quick Corner) Manually correct the four corners independently. You can correct keystone distortion using one of the following methods. • Correcting automatically (Auto V-Keystone) • Correcting manually (H-Keystone Adjuster) Manually corrects horizontal keystone distortion using the horizontal keystone adjuster. a When you correct keystone distortion, the projected image may be reduced.
Adjusting Projected Images a • Auto V-Keystone works only when Projection is set to Front from the Configuration menu. s Extended - Projection p.91 37 a • If you do not want to enable Auto V-Keystone, set Auto VKeystone to Off. s Settings - Keystone - H/V-Keystone - Auto V-Keystone p.90 • When using horizontal keystone adjuster, set H-Keystone Adjuster to On. s Settings - Keystone - H/V-Keystone - H-Keystone Adjuster p.
Adjusting Projected Images 38 a Press the [Menu] button while projecting. s "Using the Configuration Menu" p.85 Using the remote control Press the [a] or [b] button to correct horizontal distortion. a Using the control panel b Select Keystone from Settings. c Select Quick Corner, and then press the [ You can also set H/V-Keystone from the Configuration menu. s Settings - Keystone - H/V-Keystone p.
Adjusting Projected Images 39 e Using the [ ], [ ], [ ], and [ ] buttons on the remote control, or the [w], [v], [a], and [b] buttons on the control panel, correct the position of the corner. When you press the [ ] button, the screen shown in step 4 that allows you to select the area to be corrected is displayed. d Using the [ ], [ If the message "Cannot adjust any further." is displayed while adjusting, you cannot adjust the shape any further in the direction indicated by the gray triangle.
Adjusting Projected Images a 40 If the [Esc] button is held down for about two seconds while the corner selection screen from step 4 is displayed, the following screen is displayed. Adjusting the Image Position Press the foot adjust lever to extend and retract the front adjustable foot. You can adjust the position of the image by tilting the projector up to 16 degrees. Reset Quick Corner: Resets the result of Quick Corner corrections.
Adjusting Projected Images 41 • Adjust the volume from the Configuration menu. s Settings - Volume p.90 Correcting the Focus You can correct the focus using the focus ring. Caution Do not start at high volume. A sudden excessive volume may cause loss of hearing. Always lower the volume before powering off, so that you can power on and then gradually increase the volume.
Adjusting Projected Images Brightness Adjusts the overall color brightness of the image. 42 a Medical images may not be reproduced correctly according to your settings and screen specifications. Gamma Adjustment Adjusts differences in the coloring for the projected image that occurs depending on the connected device. Make settings from the configuration menu. s Image - Advanced - Gamma p.87 Select and adjust the correction value s Image - Advanced - Gamma p.
Adjusting Projected Images 43 Adjust using the gamma adjustment graph Mode s Image - Advanced - Gamma - Customized - Adjust it from the graph Photo*1 Ideal for projecting still pictures, such as photos, in a bright room. The images are vivid and brought into contrast. Sports *2 Ideal for watching TV programmes in a bright room. The images are vivid and brought to life. sRGB Ideal for images that conform to the sRGBg color standard.
Adjusting Projected Images a 44 You can set Color Mode from the Configuration menu. s Image - Color Mode p.87 Setting Auto Iris By automatically setting the luminance according to the brightness of the displayed image, it lets you enjoy deep and rich images. a Press the [Menu] button. s "Using the Configuration Menu" p.85 Using the remote control Using the control panel c d Select On. The setting is stored for each Color Mode. Press the [Menu] button to finish making settings.
Adjusting Projected Images 45 Changing methods Each time you press the [Aspect] button on the remote control, the aspect mode name is displayed on the screen and the aspect ratio changes. Remote control a You can set the aspect ratio from the Configuration menu. s Signal - Aspect p.
Adjusting Projected Images 46 For EB-1940W Aspect Mode Input Signal XGA 1024X768(4:3) Normal A 4:3 B 16:9 16:9 Projecting images from the HDMI or DisplayPort ports (for EB-1960/EB-1950/ EB-1930) Each time the Aspect button is pressed, the aspect mode changes in the order Normal or Auto, 4:3, and 16:9.
Adjusting Projected Images 47 For EB-1960/EB-1950/EB-1930 Aspect Mode Input Signal XGA 1024X768(4:3) WXGA 1280X800(16:10) Normal 4:3 16:9 a If parts of the image are missing, set the Resolution setting to Wide or Normal from the Configuration menu, according to the size of the computer panel. s Signal - Resolution p.
Useful Functions This chapter explains useful tips for giving presentations, and the Security functions.
Projection Functions 49 Projecting Two Images Simultaneously (Split Screen) You can simultaneously project images from two sources on the right and left of the screen. Input sources for split screen projection The combinations of input sources that can be projected on a split screen are listed below.
Projection Functions 50 Left Screen Right Screen Computer1 Computer2 DisplayPort Video HDMI USB Display USB LAN USB Display - - - USB - - - LAN - - - Operating procedures Projecting on a split screen a Press the [Split] button while projecting. The currently selected input source is projected on the left of the screen. Remote control c d a b You can perform the same operations from the configuration menu. s Settings - Split Screen p.90 Press the [Menu] button.
Projection Functions 51 a b Press the [Menu] button during split screen projection. Select Swap Screens, and then press the [ ] button. The projected images on the left and right are swapped. Switching the left and right image sizes Only input sources that can be combined can be selected. s "Input sources for split screen projection" p.49 a e The Source screen is also displayed when the following buttons are pressed during split screen projection.
Projection Functions 52 The projected images will appear as shown below after setting the screen size. Equal Larger Left • Press the [Split] button on the remote control. • Select Exit Split Screen from the configuration menu. s Settings - Split Screen Setup p.90 Restrictions during split screen projection Operating restrictions The following operations cannot be performed during split screen projection.
Projection Functions 53 Projecting Without a Computer (Slideshow) By connecting a USB storage device such as a USB flash drives or a USB hard disk to the projector, you can project the files stored on the device without using a computer. This function is called Slideshow. a • You may not be able to use USB storage devices that incorporate security functions. • You cannot correct keystone distortion while projecting a Slideshow, even if you press the [w] and [v] buttons on the control panel.
Projection Functions 54 • The following files are displayed as thumbnails (file contents are displayed as small images). Projecting PowerPoint files converted in EasyMP Slide Converter - JPEG files - FSE files (an image of the first slide) - PDF files (an image of the first page of the PDF) - AVI files (an image 15 seconds from the start of the movie) • Other files or folders are displayed as icons as shown in the following table.
Projection Functions a 55 • You can also insert a memory card into a USB card reader and then connect the reader to the projector. However, some commercially available USB card readers may not be compatible with the projector. • If the following screen (Select Drive screen) is displayed, press the [ ], [ ], [ ], or [ ] button to select the drive you want to use, and then press the [ ] button.
Projection Functions b While projecting, press the [ 56 ] or [ ] button. a Start Slideshow. The file list screen is displayed. s "Starting Slideshow" p.54 b Press the [ to project. ], [ c Press the [ ] button. ], [ ], or [ ] button to select the file you want Stopping Slideshow To close Slideshow, disconnect the USB device from the USB port on the projector. For devices such as digital cameras or hard disks, turn off the device and then remove it from the projector.
Projection Functions 57 finish projecting, perform one of the following operations. d •ToProjecting an image: Press the [Esc] button. • Projecting a movie: Press the [Esc] button to display the message screen, select Exit, and then press the [ ] button. When projection is finished, you are returned to the file list screen. a c If the file extension is not .pdf, the file is not displayed in the file list. Press the [ ] button. The first page in the PDF file is displayed at full screen size.
Projection Functions 58 • Selecting a page Press the [Esc] button to display the select page menu. • Rotating a page While a page is displayed at full screen size, press the [ ] or [ ] button to rotate all pages in the PDF by 90 degrees. Closing PDF file display Select the page you want to project using the [ ] or [ ] button, and then press the [ ] button to display the selected page. If you press the [Esc] button while the select page menu is displayed, the menu closes.
Projection Functions a To change files automatically when you run Slideshow, set Screen Switching Time from Option in Slideshow to anything other than No. The default setting is 3 seconds. 59 a s "Image file display settings and Slideshow operation settings" p.60 a Start Slideshow. c [ ] button, the [ ] button, or the []] button to display the next file. Playing a scenario The file list screen is displayed. s "Starting Slideshow" p.
Projection Functions 60 E Previous slide or animation (animation effects are not played.) b When the following Option screen is displayed, set each of the items. Select any of the options as necessary and press the [ To stop playback When you press the [Esc] button, the message "Do you want to quit playing the scenario?" is displayed. Select Exit, and then press the [Enter] button to confirm your selection. Select Return, and then press the [Enter] button to continue playing the file. ] button.
Projection Functions c When you have finished making settings, press the [ 61 ], [ ], [ ], or [ ] button to position the cursor over OK, and then press the [ Each time you press the [A/V Mute] button or open/close the lens cover, A/V Mute turns on or off. Remote control ] button. Projector The settings are applied. If you do not want to apply the settings, position the cursor on Cancel, and then press the [ ] button.
Projection Functions Each time you press the [Freeze] button, Freeze turns on or off. Remote control 62 a Display the Pointer. Each time you press the [Pointer] button, the pointer appears or disappears. Remote control a • Audio does not stop. • When projecting moving images, the images continue to be played back while the screen is frozen. It is not possible to resume projection from the point where the screen was frozen.
Projection Functions 63 Enlarging Part of the Image (E-Zoom) b This is useful when you want to expand images to see them in greater detail, such as graphs and tables. a Remote control ) to the area of the image that you want to enlarge. Remote control When any pair of adjacent [ ], [ ], [ ], or [ ] buttons are pressed at the same time, the pointer can be moved diagonally. Start E-Zoom. Press the [z] button to display the Cross ( Move the Cross ( ). c Enlarge.
Projection Functions 64 Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse) Once set, the mouse pointer can be controlled as follows. Moving the mouse pointer [ You can control the computer's mouse pointer from the projector's remote control. This function is called Wireless Mouse. ][ ][ ][ ] buttons: Moves the mouse pointer. The following operating systems are compatible with Wireless Mouse.
Projection Functions a • When any pair of adjacent [ 65 ], [ ], [ ], or [ ] buttons are pressed at the same time, the pointer can be moved diagonally. • If the mouse button settings are set to reverse on the computer, the operation of the remote control buttons will also be reversed. • The Wireless Mouse function does not work under the following conditions.
Projection Functions Opera‐ tion 66 Combinations Descriptions b Select Projector ID from Extended. c Select the ID you want to set, and then press the [Enter] button. d Press the [Menu] button to finish making settings. ID selected with remote control: 1 Possible Projector ID: 1 When 0 is selected with the remote control, you can operate the projector from the remote control regardless ID selected with remote of the Projector ID.
Projection Functions Selecting the ID for the projector you want to operate using the remote control a a Select the ID each time you turn on the projector. When the projector is turned on, the ID set for the remote control is 0. Point the remote control at the remote receiver of the target projector and press the [ID] button on the remote control. When you press the [ID] button, the current Projector ID is displayed on the projection screen. It disappears in about three seconds.
Projection Functions • When you select Level 5, adjust the brightness to match the darkest image. • When you select Level 1, adjust the brightness to match the brightest image. • When you select Level 2 to Level 4, adjust the brightness to the mid-range brightness image. • Because you can switch between a pattern display and the normal image each time you press the [Enter] button, you can check the correction results and correct the brightness in the actual image.
Projection Functions a • When User's Logo Protect from Password Protect is set to On, a message is displayed and the User's Logo cannot be changed. You can make changes after setting User's Logo Protect to Off. s "Managing Users (Password Protect)" p.70 • If User's Logo is selected when Keystone, E-Zoom, Aspect, or Adjust Zoom are being performed, the function currently being performed is temporarily cancelled.
Security Functions The projector has the following enhanced security functions. • Password Protect You can limit who can use the projector. • Control Panel Lock You can prevent people changing the settings on the projector without permission. s "Restricting Operation (Control Panel Lock)" p.72 • Anti-Theft Lock The projector is equipped with the following anti-theft security device. s "Anti-Theft Lock" p.
Security Functions a 71 • If Password Protect is already activated, you must enter the password. If the password is entered correctly, the Password Protect setting menu is displayed. s "Entering the Password" p.71 (3) While holding down the [Num] button, enter a four digit number using the numeric buttons. The number entered is displayed as "* * * *". When you enter the fourth digit, the confirmation screen is displayed.
Security Functions When you enter the correct password, Password Protect is temporarily released. Attention • If an incorrect password is entered three times in succession, the message "The projector's operation will be locked." is displayed for approximately five minutes, and then the projector switches to standby mode. If this happens, disconnect the power plug from the electrical outlet and then reinsert it and turn the projector's power back on.
Security Functions 73 Anti-Theft Lock The projector is equipped with the following types of anti-theft security devices. d Select Yes when the confirmation message is displayed. The control panel buttons are locked according to the setting you chose. a You can release the control panel lock by one of the following two methods. • Select Off from Control Panel Lock. s Settings - Control Panel Lock p.
Monitoring and Controlling About EasyMP Monitor EasyMP Monitor lets you carry out operations such as checking the status of multiple Epson projectors that are connected to a network at a computer monitor, and controlling the projectors from the computer. You can download EasyMP Monitor from the following Web site. http://www.epson.
Monitoring and Controlling Items in the Configuration menu that cannot be set by the Web browser • Settings Menu - Test Pattern • Settings Menu - Pointer Shape • Settings Menu - User Button • Extended Menu - User's Logo • Extended Menu - Language • Extended Menu - Operation - High Altitude Mode • Extended Menu - Operation - Lens Cover Timer • Reset Menu - Reset All and Reset Lamp Hours The settings for items on each menu are the same as the projector's Configuration menu. s "Configuration Menu" p.
Monitoring and Controlling c 76 The Web Remote screen is displayed. Name F [Page] buttons [Up] [Down] Function Changes pages in files such as PowerPoint files when using the following projection methods. • When using the Wireless Mouse function s "Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse)" p.64 • When using USB Display s "Projecting with USB Display" p.
Monitoring and Controlling s Network - Mail - Mail Notification p.96 a • Up to a maximum of three notification destinations (addresses) can be registered, and notification messages can be sent to all three destinations at once. • If a projector develops a critical problem and suddenly stops working, it may not be able to send a message notifying an operator of the problem. • If you set Standby Mode to Communication On, you can control the projector even if it is in standby mode (when the power is off).
Monitoring and Controlling 78 Item ESC/VP21 Commands A/V Mute On/Off You can control the projector from an external device using ESC/VP21. When the power ON command is transmitted to the projector, the power turns on and it enters warm-up mode. When the projector's power has turned on, a colon ":" (3Ah) is returned. When a command is input, the projector executes the command and returns a ":", and then accepts the next command.
Monitoring and Controlling 79 • Projector input port name: RS-232C About PJLink PJLink Class1 was established by the JBMIA (Japan Business Machine and Information System Industries Association) as a standard protocol for controlling network-compatible projector's as part of their efforts to standardize projector control protocols. The projector complies with the PJLink Class1 standard established by the JBMIA.
Monitoring and Controlling 80 Source PJLink Command LAN INPT 52 USB Display INPT 53 • Monitoring and control with application software You can use Crestron RoomView Express or Crestron RoomView Server Edition provided by Creston to monitor devices in the system, to communicate with the help desk, and to send emergency messages. See the following Web site for details. http://www.crestron.
Monitoring and Controlling b 81 Enter the IP address of the projector in the address field of the Web browser, and press the Enter key on the keyboard. Button Function Turns the video and audio on or off. s "Hiding the Image and Sound Temporarily (A/V Mute)" p.61 A/V Mute The operation window is displayed. Using the operation window B Switch to the image from the selected input source. To display input sources that are not shown in Source List, click (a) or (b) to scroll up or down.
Monitoring and Controlling Button 82 Function OK Performs the same operation as the [ remote control. s "Remote Control" p.15 Menu Displays and closes the Configuration menu. Auto If clicked while projecting analog RGB signals from Computer1 port or Computer2 port, automatically optimizes the image by adjusting the Tracking, Sync., and Position. Search Changes to the next input source that is sending an image.
Monitoring and Controlling Item 83 Function DHCP Select the Enabled check box to use DHCP. You cannot enter an IP address if DHCP is enabled. IP Address Enter the IP address to assign to the currently connected projector. Subnet Mask Enter a subnet mask for the currently connected projector. Default Gateway Enter the gateway address for the currently connected projector. Send Click this button to confirm the changes made to the Projector.
Configuration Menu This chapter explains how to use the Configuration menu and its functions.
Using the Configuration Menu This section explains how to use the Configuration menu. Although steps are explained using the remote control as an example, you can perform the same operations from the control panel. Check the guide under the menu for the available buttons and their operations. a b 85 c Select a submenu item. d Change settings. e Press the [Menu] button to finish making settings. Display the Configuration menu screen. Select a top menu item.
List of Functions 86 Top Menu Name Configuration Menu Table Submenu Name Video Signal Auto, NTSC, NTSC4.43, PAL, M-PAL, N-PAL, PAL60, and SECAM Aspect Normal, Auto, 4:3, 16:9, Full, Zoom, and Native Overscan Auto, Off, 4%, and 8% Image Processing Fast, Fine Keystone H/V-Keystone and Quick Corner Split Screen - Settable items vary depending on the model being used and the image signal and source being projected. Top Menu Name Image menu s p.87 Signal menu s p.
List of Functions Top Menu Name 87 Submenu Name Multi-screen Info menu s p.99 Reset menu s p.100 Items or Setting Values Adjustment Level, Brightness Correct., Color Correct. (G/R), and Color Correct. (B/Y) Language 15 or 35 languages*1 Lamp Hours - Source - Input Signal - Resolution - Video Signal - Refresh Rate - Sync Info - Status - Serial Number - Event ID - Reset All - Reset Lamp Hours - Others menu s p.98 Basic menu s p.95 Wired LAN menu s p.
List of Functions 88 s "Automatically Detect Input Signals and Change the Projected Image (Source Search)" p.31 Submenu Color Mode You can select the quality of the image to suit your surroundings. s "Selecting the Projection Quality (Selecting Color Mode)" p.43 You can adjust the image brightness. Contrast You can adjust the difference between light and dark in the images. Color Saturation (Adjustment is only possible when component video or composite video images are being input.
List of Functions 89 s "Automatically Detect Input Signals and Change the Projected Image (Source Search)" p.31 Submenu Auto Setup Resolution Tracking Submenu Sync. (Only available when an analog RGB computer signal is being input.) You can adjust computer images when flickering, fuzziness, or interference appear in the images. Position (This item cannot be set when the source is HDMI or DisplayPort.
List of Functions Submenu 90 Function Input Signal You can select input signal from Computer port. If set to Auto, the input signal is set automatically according to the connected equipment. If colors do not appear correctly when set to Auto, select the appropriate signal according to the connected equipment. Video Signal You can select the input signal from the Video port. If set to Auto, video signals are recognized automatically.
List of Functions Submenu Pointer Shape 91 Function You can select the shape of the pointer. Submenu Test Pattern Pointer 1: Pointer 2: Function You can display a test pattern to adjust the projection without connecting other equipment when you set up the projector. While the test pattern is displayed, zoom, focus adjustments, and keystone correction can be performed. To cancel the test pattern, press the [Esc] button on the remote control or the control panel.
List of Functions Submenu 92 Function Display You can make settings related to the projector's display. Messages: When set to Off, the following items will not be displayed. Item names when the Source, Color Mode, or Aspect Ratio is changed, messages when no signal is being input, and warnings such as High Temp Warning. Display Background*1: You can set the screen background to Black, Blue, or Logo when no image signal is available.
List of Functions Submenu 93 Function Multi-screen You can adjust the hue and brightness of each projected image when multiple projectors are lined up and projecting. Adjustment Level: You can adjust from black to white in five stages called Level 1 to 5, and in each of these 5 levels, you can adjust Brightness Correct. and Color Correct. Brightness Correct.: You can correct the difference in the brightness of each projector. Color Correct. (G/R) / Color Correct.
List of Functions 94 Notes on operating the Network menu Selecting from the top menu and sub menus, and changing selected items is the same as making operations from the Configuration menu. When done, make sure you go to the Complete menu, and select Yes, No, or Cancel. When you select Yes or No, you are returned to the Configuration menu.
List of Functions 95 Basic menu Submenu Projector Key‐ word Submenu Function Projector Name Displays the projector name used to identify the projector when connected to a network. When editing, you can enter up to 16 single-byte alphanumeric characters. PJLink Password Set a password to use when you access the projector using compatible PJLink software. You can enter up to 32 single-byte alphanumeric characters.
List of Functions Wired LAN menu 96 Submenu Function IP Settings You can make settings related to the following addresses. DHCPg: Set to On to configure the network using DHCP. If this is set to On, you cannot set any more addresses. IP Addressg: You can input the IP address assigned to the projector. You can enter a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used. 0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.
List of Functions 97 s "Using the Mail Notification Function to Report Problems" p.76 Submenu Function Mail Notification Set to On to send an email to the preset addresses when a problem or warning occurs with a projector. SMTP Server You can input the IP addressg for the SMTP server for the projector. You can enter a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used. 127.x.x.x, 224.0.0.0 to 255.255.255.
List of Functions 98 Others menu Submenu Function Crestron Room‐ View Set this to On only when monitoring or controlling the projector over the network using Crestron RoomView . Otherwise, set this to Off. s "About Crestron RoomView " p.80 When this is set to On, the following functions are not available. • Web control • Message Broadcasting (EasyMP Monitor Plug-in) ® ® Submenu Function SNMP Set to On to monitor the projector using SNMP.
List of Functions 99 s "Automatically Detect Input Signals and Change the Projected Image Reset menu (Source Search)" p.31 Resets all of the network settings. Submenu Submenu Reset network settings. Lamp Hours You can display the cumulative lamp operating time*. When the lamp replacement time is reached, the characters are displayed in yellow. Source You can display the source name for the connected equipment currently being projected.
List of Functions Submenu 100 Function Serial Number Displays the projector's serial number. Event ID Displays the application error log. s "About Event ID" p.117 * The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours and above is displayed as "10H", "11H", and so on. Reset Menu Submenu Function Reset All You can reset all items in the Configuration menu to their default settings.
Troubleshooting This chapter explains how to identify problems and what to do if a problem is found.
Using the Help 102 If a problem occurs with the projector, the Help screen is displayed to assist you by pressing the Help button. You can solve problems by answering the questions. a Press the [Help] button. The Help screen is displayed. Using the remote control Using the control panel Using the remote control b Using the control panel Select a menu item. c Confirm the selection. Using the remote control Using the control panel Questions and solutions are displayed as shown on the screen below.
Using the Help a See the following if the Help function does not provide a solution to the problem. s "Problem Solving" p.
Problem Solving 104 If you are having a problem with the projector, first check the projector's indicators and refer to "Reading the Indicators" below. See the following if the indicators do not show clearly what the problem might be. s "When the Indicators Provide No Help" p.107 Reading the Indicators The projector is provided with the following three indicators that indicate the operating status of the projector. A Power indicator Indicates the operating status.
Problem Solving 105 Refer to the following table to see what the indicators mean and how to remedy problems that they indicate. If all indicators are off, check that the power cord is connected correctly and that the power is being supplied normally. Sometimes, when the power cord is unplugged, the [t] indicator remains lit for a short period, but this is not a fault.
Problem Solving Status 106 Cause Remedy or Status If the lamp is not cracked: Reinstall the lamp and turn on the power. If the error continues: Replace the lamp with a new one and then turn on the power. If the error continues: Stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or the nearest address provided in the Epson Projector Contact List.
Problem Solving 107 Other Problems When the Indicators Provide No Help If any of the following problems occur and the indicators do not offer a solution, refer to the pages given for each problem. Problems Relating to Images s p.108 • No images appear Projection does not start, the projection area is completely black, or the projection area is completely blue. s p.
Problem Solving 108 Problems Relating to Images No images appear Check Remedy Did you press the [t] button? Press the [t] button to turn the power on. Are the indicators switched off? The power cord is not connected correctly or power is not being supplied. Connect the projector's power cord correctly. s "From Installation to Projection" p.30 Check that your electrical outlet or power source is functioning correctly.
Problem Solving 109 Moving images are not displayed Check Remedy Is the computer's image signal being output to the LCD and the monitor? (Only when projecting images from a laptop computer or a computer with a built-in LCD screen) Change the image signal from the computer to external output only. Check your computer's documentation, or contact the computer's manufacturer.
Problem Solving 110 Check Remedy Is the correct port selected? Change the image by pressing the [Source Search] button on the remote control or the control panel. s "Automatically Detect Input Signals and Change the Projected Image (Source Search)" p.31 Is the power for the computer or video source turned on? Turn the power on for the equipment.
Problem Solving 111 Interference or distortion appear in images Check Remedy Is the image signal format setting correct? (Only when projecting images from a video source) Change the setting according to the signal for the connected equipment. s Signal - Video Signal p.88 Are the cables connected correctly? Check that all the cables required for projection are securely connected. s "Connecting Equipment" p.
Problem Solving 112 The image is truncated (large) or small, the aspect is not suitable, or the image has been reversed Check Remedy Is a wide panel computer image being projected? (Only when projecting computer images) Change the setting according to the signal for the connected equipment. s Signal - Resolution p.88 Is the image still being enlarged by E-Zoom? Press the [Esc] button on the remote control to cancel E-Zoom. s "Enlarging Part of the Image (E-Zoom)" p.
Problem Solving 113 Check Remedy Are the cables connected correctly? Check that all the cables required for projection are securely connected. Check that no cables are disconnected and that there are no poor contacts in the cables. s "Connecting Equipment" p.23 Is the contrastg adjusted correctly? Adjust the Contrast setting from the Configuration menu. s Image - Contrast p.87 Is the color adjustment set correctly? Adjust the Gamma, RGB, or RGBCMY setting from the Configuration menu.
Problem Solving 114 Check Are the indicators switched off? Remedy The power cord is not connected correctly or power is not being supplied. Disconnect and then reconnect the power cord. s "From Installation to Projection" p.30 Check that your electrical outlet or power source is functioning correctly. Do the indicators turn on and off when the power cord is touched? There is probably a poor contact in the power cord, or the power cord may be defective. Reinsert the power cord.
Problem Solving 115 Check Is Output audio from the projector selected? (Only when projecting USB Display) Remedy Click All Programs - EPSON Projector - Epson USB Display - Epson USB Display Vx.xx Settings, and then select Output audio from the projector. The remote control does not work Check Remedy Is the remote control light-emitting area pointing towards the remote receiver on the projector during operation? Point the remote control towards the remote receiver.
Problem Solving 116 Email is not received even if a problem occurs in the projector Check Remedy Is Standby Mode set to Communication On? To use the Mail Notification function when the projector is in standby, set Communication On in Standby Mode from the Configuration menu. s Extended - Standby Mode p.91 Did a fatal abnormality occur and the projector come to a sudden stop? When the projector comes to a sudden stop, email cannot be sent.
About Event ID 117 Check the numbers and then apply the following countermeasures. If you cannot resolve the problem, contact your network administrator, or contact your local dealer or the nearest address provided in the Epson Projector Contact List. s Epson Projector Contact List Event ID Cause Remedy 0432 0435 Failed to startup EasyMP Network Projection. Restart the projector. 0434 0481 0482 0485 Network communication is unstable.
Maintenance This chapter provides information on maintenance procedures to ensure the best level of performance from the projector for a long time to come.
Cleaning You should clean the projector if it becomes dirty or if the quality of projected images starts to deteriorate. Caution Turn off the projector's power before cleaning. Otherwise, it could cause an electric shock. Cleaning the Projector's Surface Clean the projector's surface by wiping it gently with a soft cloth.
Cleaning a 120 • If a message is frequently displayed, even after cleaning, it is time to replace the air filter. Replace it with a new air filter. s "Replacing the Air Filter" p.125 • It is recommended that you clean these parts at least once every three months. Clean them more often than this if using the projector in a particularly dusty environment.
Replacing Consumables This section explains how to replace the lamp and the air filter. 121 • The lamp indicator flashes orange. Replacing the Lamp Lamp replacement period It is time to replace the lamp when: • The following message is displayed. "Time to replace the lamp. Please contact your Epson projector reseller or visit www.epson.com to purchase." • The projected image gets darker or starts to deteriorate. The message is displayed for 30 seconds.
Replacing Consumables 122 Attention • The lamp replacement message is set to appear after the following time periods in order to maintain the initial brightness and quality of the projected images.
Replacing Consumables 123 d Take out the old Lamp by pulling the handle. If the Lamp is cracked, replace it with a new lamp, or contact your local dealer for further advice. s Epson Projector Contact List c Loosen the two lamp fixing screws.
Replacing Consumables e 124 Install the new lamp. Insert the new Lamp along the guide rail in the correct direction so that it fits in place, push in firmly, and once it is fully inserted tighten the two screws. f Replace the lamp cover.
Replacing Consumables Attention • Make sure you install the lamp securely. If the lamp cover is removed, the power turns off automatically as a safety precaution. If the lamp or the lamp cover is not installed correctly, the power does not turn on. • This product includes a lamp component that contains mercury (Hg). Please consult your local regulations regarding disposal or recycling. Do not dispose of it with normal waste.
Replacing Consumables d Install the new air filter. e Close the air filter cover. Press until it clicks into place. a Dispose of used air filters properly in accordance with your local regulations.
Appendix
Optional Accessories and Consumables The following optional accessories and consumables are available. Please purchase these products as and when needed. The following list of optional accessories and consumables is current as of: February 2012. Details of accessories are subject to change without notice and availability may vary depending on the country of purchase. Optional Accessories Interactive Unit ELPIU01 Use when operating the computer screen on the projection surface.
Optional Accessories and Consumables Consumables Lamp unit ELPLP74 (EB-1930 only) Lamp unit ELPLP75 Use as a replacement for used lamps. Air filter ELPAF41 Use as a replacement for used air filters.
Screen Size and Projection Distance 130 A Projection Distance (For EB-1960/EB-1950/ EB-1930) 4:3 Screen Size Minimum (Wide) to Maximum (Tele) B 50" 100x76 140 - 229 -8 60" 120x91 169 - 275 -10 80" 160x120 226 - 368 -13 100" 200x150 283 - 460 -16 150" 300x230 426 - 692 -24 200" 410x300 568 - 923 -32 250" 500x380 711 - 1155 -40 300" 610x457 854 - 1386 -48 Unit: cm A 16:9 Screen Size A Projection distance B Distance from the center of the lens to the base of the screen (
Screen Size and Projection Distance 131 A Projection Distance (For EB-1940W) 4:3 Screen Size Minimum (Wide) to Maximum (Tele) B 60" 120x91 203 - 331 -2 80" 160x120 271 - 442 -3 100" 200x150 340 - 553 -4 120" 244x183 408 - 664 -5 150" 300x230 511 - 831 -6 200" 410x300 682 - 1108 -8 250" 500x380 854 - 1386 -10 Unit: cm A 16:9 Screen Size A Projection distance B Distance from the center of the lens to the base of the screen (or to the top of the screen, if suspended from a c
Screen Size and Projection Distance 132 Unit: cm A 16:10 Screen Size Minimum (Wide) to Maximum (Tele) B 30" 64x40 88 - 144 -1 40" 86x54 118 - 193 -1 50" 110x67 149 - 243 -2 60" 130x81 179 - 292 -2 80" 170x110 239 - 390 -3 100" 220x130 300 - 488 -3 150" 320x200 451 - 733 -5 200" 430x270 603 - 979 -7 250" 540x340 754 - 1224 -8 280" 605x377 845 - 1371 -9
Supported Monitor Displays 133 Supported Resolutions Computer signals (analog RGB) Signal Refresh Rate (Hz) Resolution (dots) VGA 60/72/75/85 640x480 SVGA 56/60/72/75/85 800x600 XGA 60/70/75/85 1024x768 WXGA 60 1280x768 60 1366x768 60/75/85 1280x800 WXGA+ 60/75/85 1440x900 WXGA++ 60 1600x900 SXGA 70/75/85 1152x864 60/75/85 1280x1024 60/75/85 1280x960 60/75 1400x1050 60 1680x1050 UXGA 60 1600x1200 MAC13" 67 640x480 MAC16" 75 832x624 MAC19" 75 1024x768 59 102
Supported Monitor Displays Signal Refresh Rate (Hz) Resolution (dots) SVGA 60 800x600 XGA 60 1024x768 WXGA 60 1280x800 60 1280x960 60 1280x1024 SXGA+ 60 1400x1050 UXGA 60 1600x1200 SDTV (480i*/480p) 60 720x480 SDTV (576i*/576p) 50 720x576 HDTV (720p) 50/60 1280x720 HDTV (1080i) 50/60 1920x1080 HDTV (1080p) 24*/30*/50/60 1920x1080 SXGA * 134 HDMI input only
Specifications 135 Projector General Specifications Product name EB-1960 EB-1950 EB-1940W 377 (W) x 108 (H) x 271 (D) mm Dimensions LCD panel size 0.63" 0.59" Wide 786,432 pixels XGA (1024 (W) x 768 (H) dots)x 3 Resolution 1,024,000 pixels XGA (1280 (W) x 800 (H) dots)x 3 Focus adjustment Manual Zoom adjustment 1-1.6 UHE lamp, 245 W Model No.: ELPLP75 Lamp Max. audio output 0.
Specifications 136 Approx. 3.7 kg Mass Connectors Computer1 port 1 Mini D-Sub15-pin (female) Computer2 port 1 Mini D-Sub15-pin (female) DisplayPort 1 DisplayPort Video port 1 RCA pin jack Audio1 port 1 Stereo mini jack (3.5Ф) Audio2 port 1 Stereo mini jack (3.5Ф) Audio-L/R port 1 RCA pin jack x 2 (L-R) Audio Out port 1 Stereo mini jack (3.
Specifications This product is also designed for IT power distribution system with phase-to-phase voltage 230V. Angle of tilt If you use the projector tilted at an angle of more than 30˚ it could be damaged and cause an accident.
Specifications 138 DECLARATION of CONFORMITY According to 47CFR, Part 2 and 15 Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers We: Located at: Tel: Epson America, Inc. 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806 562-290-5254 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device.
Appearance 139 Units: mm 377 15 48.
Glossary 140 This section briefly explains the difficult terms that are not explained in the text of this guide. For details, refer to other commercially available publications. Ad hoc mode A method of wireless LAN connection that communicates with wireless LAN clients without using an access point. AMX Device Discovery AMX Device Discovery is a technology developed by AMX to facilitate AMX control systems for easy operation of the target equipment.
Glossary 141 Refresh Rate The light-emitting element of a display maintains the same luminosity and color for an extremely short time. Because of this, the image must be scanned many times per second to refresh the light-emitting element. The number of refresh operations per second is called the Refresh rate and is expressed in hertz (Hz).
General Notes All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein.
General Notes The DisplayPort Certified Logo and DisplayPort Icons are Registered Trademarks of the Video Electronics Standards Association (VESA). The word DisplayPort is a Registered Trademark of VESA in various countries around the world. HDMI and High-Definition Multimedia Interface are the trademarks or registered trademarks of HDMI Licensing LLC. PJLink trademark is a trademark applied for registration or is already registered in Japan, the United States of America and other countries and areas.
Index 144 A A/V Mute ...................................................... 61 Abs. Color Temp. ........................................ 88 Air exhaust vent ........................................... 11 Air filter replacement period ................... 125 Aspect ...................................................... 44, 90 Audio Input .................................................. 92 Auto Iris .................................................. 44, 88 Auto Setup ......................................
Index 145 M Position ......................................................... 89 Power Consumption ................................... 91 Power indicator .......................................... 104 Power inlet .................................................... 12 Power On Protect ........................................ 70 Presentation ........................................... 43, 53 Problem Solving ......................................... 104 Progressive ........................................
Index 146 U USB(TypeA) port ......................................... USB(TypeB) port ......................................... User Button .................................................. User's Logo ................................................... User's Logo Protect ...................................... 12 12 91 68 70 V Video Port ..................................................... 12 Video Signal ........................................... 90, 99 Volume ......................................