Operation Manual
Submenu Function
Input Signal
You can select input signal from Computer port.
If set to Auto, the input signal is set automatically
according to the connected equipment.
If colors do not appear correctly when set to Auto, select
the appropriate signal according to the connected
equipment.
Video Signal
You can select the input signal from the Video port. If set
to Auto, video signals are recognized automatically. If
interference appears in the image or a problem occurs such
as no image is being projected when set to Auto, select the
appropriate signal according to the connected equipment.
Aspect
You can set the
aspect ratio
g
for projected images.
s "Changing the Aspect Ratio of the Projected Image "
p.44
Overscan
(This setting can only be adjusted when a component video
or RGB video signal is being input.)
Changes the output image ratio (the range of the projected
image). You can set the cropping range to Off, 4%, or 8%.
When the source is HDMI, Auto is available. When Auto is
selected, it automatically changes to Off or 8% according to
the input signal.
Image Process‐
ing
Changes settings for image processing.
Fast: Images are displayed quicker. The pen's tracking delay
is improved when using the optional interactive unit.
Fine: Images are displayed in higher quality.
Reset
You can reset all adjustment values on the Signal menu to
their default settings, except for Input Signal.
See the following to return all menu items to their default
settings.
s "Reset Menu" p.100
Settings Menu
Submenu Function
Keystone
You can correct keystone distortion.
• When H/V-Keystone is selected:
Adjust V-Keystone and H-Keystone to correct horizontal
and vertical keystone distortion.
You can also set H-Keystone Adjuster and Auto V-
Keystone to On or Off.
s "Correcting Keystone Distortion" p.36
• When Quick Corner is selected:
Select and correct the four corners of the projected image.
s "Quick Corner" p.38
Split Screen
You can split the screen into two screens.
You can change the Screen Size, and select the Source, Swap
Screens, Audio Source, and Exit Split Screen.
s "Projecting Two Images Simultaneously (Split Screen) "
p.49
Control Panel
Lock
You can use this to restrict operation of the projector's control
panel.
s "Restricting Operation (Control Panel Lock)" p.72
List of Functions
90