Operation Manual

Wired LAN menu

Submenu Function

IP Settings

You can make settings related to the following addresses.

DHCP

: Set to On to configure the network using DHCP. If this

is set to On, you cannot set any more addresses.

IP Address

: You can input the IP address assigned to the

projector. You can enter a number from 0 to 255 in each field of

the address. However, the following IP addresses cannot be used.

0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a

number from 0 to 255)

Subnet Mask

: You can input the subnet mask for the projector.

You can enter a number from 0 to 255 in each field of the address.

However, the following subnet masks cannot be used.

0.0.0.0, 255.255.255.255

Gateway Address

: You can input the IP address for the gateway

for the projector. You can enter a number from 0 to 255 in each

field of the address. However, the following gateway addresses

cannot be used.

0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a

number from 0 to 255)

IP Address Dis‐

play

To prevent the IP address from being displayed on Network Info

in the Network Menu and on the LAN Standby screen, set this to

Off.

Mail menu

When this is set, you receive an email notification if a problem or warning

occurs in the projector.

List of Functions