User`s guide

If you move the mouse pointer over the icon of the Error information,
details of the error and the remedy will be displayed. If you
double-click in a line, the properties for that projector will be displayed.
s p.27
The icon patterns and their meanings are explained below.
A
Type
Shows the group or projector status.
No warnings or problems
*1
Warning or problem
An error has occurred on the projector.
Notification
The projector requires immediate attention.
Monitoring disabled
The projector is not being monitored. If you right-click the
icon and select Monitoring enabled, the projector will be added
to the projectors that are being monitored.
Data being updated
Network error (Monitor Password authentication error)
No Monitor Password was entered when the projector was regis-
tered, or an incorrect Monitor Password was entered. s p.11,
p.14, p.15
Network error (TCP connection error)
*2
Network error (ESC/VP.net communication error)
*3
B
Display name
Shows the display name.
C
Power
Shows the power on status for the projector.
Power on and normal status Power off and normal status
Power on and abnormal sta-
tus
Power off and abnormal sta-
tus
D
Lamp Hours
Shows the lamp operating time for the projector.
E
Source
Shows the input source that has been selected for the projector.
Computer or Computer1 Computer2
BNC S-Video
Video (RCA) Video (BNC)
DVI-D1 or HDMI1,
DVI-D, HDMI
*4
DVI-D2 or HDMI2
*5
D-Video EasyMP
USB Display USB or USB1
Monitoring window layout
25