User`s guide

Checking properties in detail
You can check the properties of Group and projectors in detail.
Displaying Group properties
Procedure
You can use either of the following methods to display the
properties.
• Displaying the properties for all groups in Grouping view
Right-click in Grouping view and select Property.
• Displaying the specified group properties
Right-click an icon in Grouping view and then select Property.
If you double-click in a line, the properties for that group or projector
will be displayed.
Displaying Projector properties
Right-click on a projector icon in Grouping view or Detail list view and
select Property.
A
Shows the projector's serial number. If hyphens are displayed, confirm the
serial number on the label of the projector.
B
Displays the projector firmware version.
Displaying and deleting logs
In your web browser, you can check a transmission log of content such
as what has been controlled by EasyMP Monitor, projector errors. You
can delete logs once you have checked them.
q
When Log output is set to On at Environment setup in the Tool
menu, transmission logs are stored. The default setting is Off.
Monitoring window layout
27