User’s Guide
Notations Used in This Guide • Safety indications The documentation and the projector use graphical symbols to show how to use the projector safely. The indications and their meaning are as follows. Make sure you understand them properly before reading the guide. Warning This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.
Contents 3 Notations Used in This Guide . . . . . . . . . . . . . . . . . . . . . . . . 2 Preparing the Projector Installing the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Introduction Installation Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Projector Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Projection Functions . . . . . . . . . . . . . . . . . . . . .
Contents 4 Adjusting the Horizontal Position of the Image (Models Supplied with the Feet Only) ........ ......... .......... ......... .......... ......... ... Correcting the Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Selecting the Projection Quality (Selecting Color Mode) . . . . . . . . . . . . . . . . . . . Setting Auto Iris . . . . . . . . . . . . .
Contents 5 Configuration Menu Using the Configuration Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 List of Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Configuration Menu Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Network menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 Image Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 6 Replacing Consumables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 Replacing the Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lamp replacement period . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . How to replace the lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Resetting the lamp hours . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction This chapter explains the projector's features and the part names.
Projector Features Projection Functions Enabling projection from a short distance You can project large images from a short distance without having to move the projector away from the screen. By mounting the projector on a ceiling or wall, you can minimize shadows cast on the screen even when you are standing near it and avoid being dazzled by the projected light. s "Screen Size and Projection Distance" p.
Projector Features Easy connection to a computer with Quick Wireless By simply connecting the optional Quick Wireless Connection USB Key to a computer, you can project the computer's screen. (Windows computers only) s "Optional Accessories" p.
Part Names and Functions 10 Name Front/Top Name Function A Remote receiver Receives signals from the remote control. B Lamp cover Open when replacing the projector's lamp. s "Replacing the Lamp" p.139 C Lamp cover fixing screw Screw to fix the lamp cover in place. s "Replacing the Lamp" p.139 D Air exhaust vent Exhaust vent for air used to cool the projector internally.
Part Names and Functions 11 Side Name Function C Wireless LAN indicator Indicates the access status to the optional wireless LAN unit. D Easy Interactive Function receiver (EB-485Wi/EB-480i/ EB-475Wi only) Receives signals from the Easy Interactive Pen. s "Easy Interactive Function (EB-485Wi/EB-480i/ EB-475Wi only)" p.57 E Obstacle sensor Detects obstacles that are interfering with the projection area. s "Cleaning the Obstacle Sensor" p.
Part Names and Functions 12 Name Interface The following ports are available under the cable cover. Name Function G LAN port Connects a LAN cable to connect to a network. H USB-A port • Connects a USB memory device or a digital camera, and projects images as a Slideshow. s "Projecting Without a Computer (Slideshow)" p.74 • Connects the optional Document Camera.
Part Names and Functions Name 13 Function N Audio-L/R port Inputs audio from equipment connected to the S-Video port or the Video port. O Video port Inputs composite video signals from video sources. P S-Video port For S-video signals from video sources. Q Mic port Inputs audio from the microphone. s "Connecting a microphone" p.33 Base Name Function A Ceiling mount fixing points (five points) Attach the optional Ceiling Mount here when suspending the projector from a ceiling.
Part Names and Functions 14 Name Function C Rear foot fixing points (two points) Attach the feet when using the projector on a surface such as a desk. (Only models with feet supplied) s "Attaching the feet (Only models with feet supplied)" p.14 D Wall mount fixing points (four points) Attach the setting plate when mounting on a wall. (Only models with setting plate supplied) s Installation Guide s "Optional Accessories" p.
Part Names and Functions 15 Name Control Panel Function D [w][v] button • Displays the Keystone screen. s "H/V-Keystone" p.45 • If pressed when the Configuration menu or the Help screen is displayed, these buttons select menu items and setting values. s "Using the Configuration Menu" p.95 s "Using the Help" p.117 E [Help] button Displays and closes the help screen which shows you how to deal with problems if they occur. s "Using the Help" p.117 F [Esc] button • Stops the current function.
Part Names and Functions Remote Control 16 Name Function A [t] button Turns the projector power on or off. s "From Installation to Projection" p.39 B [Computer] button Each time you press the button, the input changes between images from the Computer1 port and the Computer2 port. C [Video] button Each time the button is pressed, the image cycles through the S-Video, Video, and HDMI ports. D Numeric buttons • Enter the Password. s "Setting Password Protect" p.
Part Names and Functions Name I [ ][ ][ ][ ] button J [ ] button K [User] button 17 Function • When the Configuration menu or Help screen is displayed, pressing these buttons selects menu items and setting values. s "Using the Configuration Menu" p.95 • When projecting a Slideshow, pressing these buttons displays the previous/next image, rotates the image, and so on. s "Projecting Without a Computer (Slideshow)" p.
Part Names and Functions Name T [Esc] button 18 Function • Stops the current function. • If pressed when the Configuration menu is displayed, it moves to the previous level. s "Using the Configuration Menu" p.95 • Acts as a mouse's right button when using the Wireless Mouse function. s "Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse)" p.70 U [Color Mode] button V [LAN] button Each time the button is pressed, the color mode changes.
Part Names and Functions Caution Check the positions of the (+) and (-) marks inside the battery holder to ensure the batteries are inserted the correct way. c Reattach the battery cover. Press the battery cover until it clicks into place.
Part Names and Functions 20 Easy Interactive Pen (EB-485Wi/EB-480i/EB-475Wi Only) Name Function C Battery indicator Indicates the remaining battery power when the power is turned on. • Turns green for several seconds when the battery is charged. • Flashes green for several seconds when the battery is low. • Does not light when the battery is exhausted. Change the battery. s "Replacing the battery for the Easy Interactive Pen" p.20 D Slide switch Switches the Easy Interactive Pen on and off.
Part Names and Functions a Remove the battery cover. b Replace the old battery with a new battery. 21 While pushing the battery cover catch, lift the cover up. Replacing the tip of the Easy Interactive Pen Replace the tip of the Easy Interactive Pen when it is worn. s "Optional Accessories" p.146 a Turn the tip of the pen to remove it. b Turn the new tip to attach it. Caution Check the positions of the (+) and (-) marks inside the battery holder to ensure the battery is inserted the correct way.
Part Names and Functions 22 Pen Tray (EB-485Wi/EB-480i/EB-475Wi Only) Name Function A Fixing points Attach the pen tray to a whiteboard or wall. B Security hole Pass a commercially available lock through here. a It is recommended that the pen tray be tightened with two commercially available M5 bolts.
Preparing the Projector This chapter explains how to install the projector and connect projection sources.
Installing the Projector 24 • Project images from in front of the screen. (Front projection) Installation Methods The projector supports the following six different projection methods. Install the projector according to the installation location. • Project images from behind a translucent screen. (Rear projec‐ tion) Turn the projector off when you are changing the installation method. Turn the projector back on after changing the installation method.
Installing the Projector Warning • A special method of installation is required when suspending the projector from a wall or ceiling. If it is not installed correctly, it could fall causing an accident and injury. • If you use adhesives on the wall mount plate fixing points or the ceiling mount fixing points to prevent the screws from loosening, or if you use things such as lubricants or oils on the projector, the projector case may crack causing it to fall from its mount.
Connecting Equipment 26 The port name, location, and connector orientation differ depending on the source being connected. Connecting a Computer To project images from a computer, connect the computer using one of the following methods. A B When using a commercially available computer cable Connect the computer's display output port to the projector's Computer1 or Computer2 port.
Connecting Equipment a 27 • If it is difficult to connect the computer cable to the projector's Computer2 port, try disconnecting the cable from the Computer1 port, connecting the cable to the Computer2 port, and then reconnecting the cable to the Computer1 port. • You can switch the audio input by using Audio Input. s Extended - Operation - Audio Input p.103 • You can use a USB cable to connect the projector to a computer to project images from the computer. This function is called USB Display.
Connecting Equipment 28 Connecting Image Sources To project images from DVD players or VHS video and so on, connect to the projector using one of the following methods. A When using a commercially available video cable B Connect the video output port on the image source to the projector's Video port using a commercially available video cable.
Connecting Equipment Attention • If the input source is on when you connect it to the projector, it could cause a malfunction. • If the orientation or shape of the plug differs, do not try to force it in. The device could be damaged or could malfunction.
Connecting Equipment a 30 • You can switch the audio input by using Audio Input. s Extended - Operation - Audio Input p.103 • If the source you want to connect to has an unusually shaped port, use the cable supplied with the device or an optional cable to connect to the projector. • When using a commercially available 2RCA(L/R)/stereo mini-pin audio cable, make sure it is labeled "No resistance".
Connecting Equipment 31 Connecting USB Devices You can connect devices such as USB memory, the optional Document Camera, and USB compatible hard disks and digital cameras. Using the USB cable supplied with the USB device, connect the USB device to the USB-A port on the projector. When the USB device is connected, you can project image files on the USB memory or digital camera using Slideshow. s "Projecting Without a Computer (Slideshow)" p.
Connecting Equipment 32 Attention • • • • If you use a USB hub, operation may not be performed correctly. Devices such as digital cameras and USB devices should be connected to the projector directly. When connecting and using a USB-compatible hard disk, make sure you connect the AC adaptor supplied with the hard disk. Connect a digital camera or hard disk to the projector using a USB cable supplied with or specified for use with the device. Use a USB cable less than 3 m in length.
Connecting Equipment Connecting a microphone You can output microphone audio from the projector's speaker by connecting a commercially available dynamic microphone. a • Plug-in-power is not supported. • Adjust Mic Input Level if the microphone audio is difficult to hear, or if it is too loud resulting in a crackling sound. s Settings - Mic Input Level p.101 • Make the following settings to output audio from a microphone when the projector is in standby mode. Set Standby Mode to Communication On.
Connecting Equipment Connecting External Equipment You can output images and audio by connecting an external monitor or speaker. A When outputting images to an external monitor Connect the external monitor to the projector's Monitor Out port using the cable supplied with the external monitor. B When outputting audio to an external speaker Connect the external speaker to the projector's Audio Out port using a commercially available audio cable.
Connecting Equipment a 35 • If you set Standby Mode to Communication On, you can output images to an external monitor even if the projector is in standby mode. You can also output audio to an external speaker. Audio input from the HDMI port, USB-A port, USB-B port, or the LAN port cannot be output. s Extended - Standby Setup - Standby Mode p.103 • Only analog RGB signals from the Computer1 port can be output to an external monitor.
Connecting Equipment Connecting a LAN Cable Connect a LAN port on network hubs or other equipment to the projector's LAN port with a commercially available 100BASE-TX or 10BASE-T LAN cable. a To prevent malfunctions, use a category 5 shielded LAN cable.
Connecting Equipment Installing the Optional Wireless LAN Unit a Remove both of the cable cover fixing screws to open the cable cover. 37 b Install the Wireless LAN unit.
Basic Usage This chapter explains how to project and adjust images.
Projecting images From Installation to Projection This section explains the procedure for connecting the projector to a computer with the computer cable and projecting images. 39 d e Turn on the computer. Change the computer's screen output. When using a laptop computer, you need to change the screen output from the computer. Hold down the Fn key (function key), and press the b key. a • The method for changing differs depending on the computer being used.
Projecting images 40 Automatically Detect Input Signals and Change the Projected Image (Source Search) Press the [Source Search] button to project images from the port currently receiving an image. Using Remote Control Computer1 LAN Computer2 USB Using the Control Panel S-Video Video USB Display HDMI When two or more image sources are connected, press the [Source Search] button until the target image is projected.
Projecting images 41 Switching to the Target Image Using the Remote Control You can change directly to the target image by pressing the following buttons on the remote control. Remote control Projecting with USB Display You can use the supplied or a commercially available USB cable to connect the projector to a computer to project images from the computer. You can send the computer's audio with the projected image.
Projecting images 42 Amount of Mem‐ ory 256 MB or more Recommended: 512 MB or more Hard Disk Space 20 MB or more Display Resolution of no less than 640x480 and no higher than 1600x1200. Display color of 16-bit color or greater *1 Service Pack 4 only Connecting for the first time The first time you connect the projector and the computer using the USB cable, the driver needs to be installed. The procedure is different for Windows and Mac OS X. a For Mac OS X OS Mac OS X 10.5.x 32 bit Mac OS X 10.
Projecting images c d Computer images are projected. It may take a while for computer images to be projected. Until the computer images are projected, leave the equipment as is and do not disconnect the USB cable or turn off the power of the projector. Disconnect the USB cable when you are finished. When disconnecting the USB cable, there is no need to use Safely Remove Hardware. a • If it is not installed automatically, double-click My Computer - EPSON_PJ_UD - EMP_UDSE.EXE on your computer.
Projecting images For Windows XP a b c Click Start, and then click Control Panel. Double-click Add or Remove Programs. Select Epson USB Display and click Remove. For Windows Vista/Windows 7 a b c Click Start, and then click Control Panel. Click Uninstall a program under Programs. Select Epson USB Display and click Uninstall. For Mac OS X a b Open the Applications folder, double-click USB Display, and then double-click Tool. Run USB Display Uninstaller.
Adjusting Projected Images Correcting Keystone Distortion You can correct keystone distortion using one of the following methods. • H/V-Keystone Manually correct distortion in the horizontal and vertical directions independently. 45 H/V-Keystone Manually correct distortion in the horizontal and vertical directions independently. H/V-Keystone correction is ideal for fine-tuning keystone distortion. You can use H/V-Keystone to correct the projected image under the following conditions.
Adjusting Projected Images 46 Press the [Tele] or [Wide] buttons to correct horizontal distortion. a You can set H/V-Keystone from the Configuration menu. s Settings - Keystone - H/V-Keystone p.101 c Select Quick Corner, and then press the [ d Select the corner to correct using the [ ] button. Quick Corner This allows you to manually correct each of the four corners of the projected image separately. a Press the [Menu] button while projecting. s "Using the Configuration Menu" p.
Adjusting Projected Images e Correct the position of the corner using the [ 47 ], [ ], [ ], and [ ] buttons on the remote control, or the [w], [v], [Wide], and [Tele] buttons on the control panel. When you press the [ displayed. ] button, the screen shown in step 4 is If the message "Cannot adjust any further." is displayed while adjusting, you cannot adjust the shape any further in the direction indicated by the gray triangle. f Repeat procedures 4 and 5 as needed to adjust any remaining corners.
Adjusting Projected Images a If the [Esc] button is held down for about two seconds while the corner selection screen from step 4 is displayed, the following screen is displayed. Reset Quick Corner: Resets the result of Quick Corner corrections. Switch to H/V-Keystone: Switches the correction method to H/V-Keystone. s "Settings Menu" p.101 48 Adjusting the Position of the Image (Image Shift) You can fine tune the position of the image without moving the projector. a Perform Adjust Zoom or Keystone.
Adjusting Projected Images 49 a • You cannot adjust the image position when Zoom is set to the maximum Wide position. • The Image Shift setting is retained even if the projector is turned off. You need to re-adjust the position if you change the installation location or angle of the projector. • You can also use the Configuration menu to adjust the position of the image. s Settings - Image Shift p.
Adjusting Projected Images Lowering the height of the image 50 B Retract the rear foot. Correcting the Focus You can correct the focus using the focus lever. A You can lower the height of the image by extending the front foot. B Retract the front foot to return the image to its original height. Adjusting the Horizontal Position of the Image (Models Supplied with the Feet Only) Extend and retract the rear feet to adjust the projector's horizontal tilt.
Adjusting Projected Images 51 • Press the [Volume] buttons on the remote control to adjust the volume. [a] Decreases the volume. [b] Increases the volume. Remote control • Adjust the volume from the Configuration menu. s Settings - Volume p.101 Caution Do not start when the volume is set too high. A sudden increase in volume may cause loss of hearing. Always lower the volume before powering off, so that you can power on and then gradually increase the volume.
Adjusting Projected Images a 52 You can set Color Mode from the Configuration menu. s Image - Color Mode p.98 Setting Auto Iris By automatically setting the luminance according to the brightness of the displayed image, it lets you enjoy deep and rich images. a Press the [Menu] button. s "Using the Configuration Menu" p.95 Using Remote Control Using the Control Panel c d Select On. The setting is stored for each Color Mode. Press the [Menu] button to finish making settings.
Adjusting Projected Images 53 Changing methods Each time you press the [Aspect] button on the remote control, the aspect mode name is displayed on the screen and the aspect ratio changes. Remote control a You can set the aspect ratio from the Configuration menu. s Signal - Aspect p.
Adjusting Projected Images Aspect mode 54 Input Signal XGA 1024X768(4:3) Changing the aspect mode (EB-480i/EB-480/EB-470 only) WXGA 1280X800(16:10) Projecting images from video equipment 16:9 Each time the [Aspect] button is pressed, the aspect mode changes in the order 4:3 and 16:9. When inputting a 720p/1080i signal and the aspect mode is set to 4:3, a 4:3 zoom is applied (the right and left sides of the image are cut off).
Adjusting Projected Images 55 B 4:3 C 16:9 Projecting images from a computer Each time the [Aspect] button is pressed, the aspect mode changes in the order Normal, 4:3, and 16:9. The following shows projection examples for each aspect mode. Aspect mode Input Signal XGA 1024X768(4:3) WXGA 1280X800(16:10) Normal 4:3 16:9 a If parts of the image are missing, set the Resolution setting to Wide or Normal from the Configuration menu, according to the size of the computer panel. s Signal - Resolution p.
Useful Functions This chapter explains useful functions for giving presentations and so on, and the security functions.
Easy Interactive Function (EB-485Wi/EB-480i/EB-475Wi only) 57 Introducing the Easy Interactive Function The Easy Interactive Function allows you to perform the following operations using the Easy Interactive Pen. Drawing with the projector's built-in function You can write and draw on the projected screen using the projector's built-in drawing function without having to use any additional software. You can draw on any image source. s "Drawing with the Projector's Built-in Function" p.
Easy Interactive Function (EB-485Wi/EB-480i/EB-475Wi only) Attention The Easy Interactive Function operates by infrared communication. Note the following important points when using this function. • Make sure there is no strong light or sunlight shining on the Easy Interactive Function receiver or the projection screen. • If there is any dust stuck to the Easy Interactive Function receiver, it could interfere with infrared communication and you may not be able to use the function normally.
Easy Interactive Function (EB-485Wi/EB-480i/EB-475Wi only) s "Easy Interactive Pen (EB-485Wi/EB-480i/EB-475Wi Only)" p.20 s "Toolbar functions" p.62 a The projector's built-in drawing function is not available if both of the following conditions are met. • Extended - USB Type B is set to Easy Interactive Function or USB Display/Easy Interactive Function from the configuration menu.
Easy Interactive Function (EB-485Wi/EB-480i/EB-475Wi only) 60 If Auto Calibration is unsuccessful, try Manual Calibration. s "Manual Calibration" p.60 Manual Calibration This function allows you to manually calibrate the pen. a Set Extended - Easy Interactive Function to Manual Calibration from the configuration menu. b Adjust the focus by following the on-screen instructions. s "Correcting the Focus" p.50 c Select "Yes". d The pattern image is projected and calibration starts.
Easy Interactive Function (EB-485Wi/EB-480i/EB-475Wi only) 61 a e Make sure you touch the center of the dot. Otherwise, it may not be positioned correctly. The dot appears at the top left first and then moves towards the bottom right. Repeat step 4 until all of the dots disappear. c Use the [ ] button on the remote control or control panel to select "Yes". d A dot is displayed on the projected screen. Touch the center of the dot with the tip of the Easy Interactive Pen.
Easy Interactive Function (EB-485Wi/EB-480i/EB-475Wi only) a • If you touch the wrong position, press the [Esc] button on the remote control or control panel to return to the previous dot. You cannot go back further than the previous dot. • Press and hold the [Esc] button to cancel the calibration. • It may take several seconds after all of the dots have disappeared until calibration is complete.
Easy Interactive Function (EB-485Wi/EB-480i/EB-475Wi only) B Whiteboard mode tab Switches to Whiteboard mode. C Undo Undoes the previous operation. D Redo Cancels an undo operation and restores the previous status. E Freeze (Annotation mode only) Pauses the projected image. Each time you touch the icon, Freeze turns on or off. a F 63 G E-Zoom Displays a target allowing you to enlarge the image at the center of the target. You can move the target with the Easy Interactive Pen.
Easy Interactive Function (EB-485Wi/EB-480i/EB-475Wi only) M Blue pen Switches to a blue pen to draw freely. Click on the right of the icon to draw thick lines, and click on the left of the icon to draw fine lines. N Eraser Switches to an eraser. Click on the right of the icon to erase wider areas, and click on the left of the icon to erase narrower areas. O a Clear screen Clears everything drawn on the displayed page. • Click [ 64 You need a drawing function already available on your computer.
Easy Interactive Function (EB-485Wi/EB-480i/EB-475Wi only) CPU Power PC G3 900 MHz or faster Recommended: Intel Core Duo 1.
Easy Interactive Function (EB-485Wi/EB-480i/EB-475Wi only) 66 Adjusting the pen operation area a When using the Easy Interactive Function by connecting to a computer, the pen operation area is automatically adjusted if the resolution of the computer changes. You do not need to perform pen alignment again. a You can turn this function On or Off in Auto Adjust Pen Area from the configuration menu. The default setting is On. b • Adjust to fit the projected image within the screen.
Projection Functions Hiding the Image and Sound Temporarily (A/V Mute) You can switch off the image on the screen when you want to focus the audience's attention on what you are saying, or when you do not want to display operations such as changing files. 67 a • If you use this function when projecting moving images, the images and sound continue to be played back by the source, and you cannot return to the point where A/V Mute was activated.
Projection Functions a • Audio does not stop. • For moving images, the images continue to play back while the screen is frozen, so it is not possible to resume projection from the point where the screen was frozen. • If the [Freeze] button is pressed while the Configuration menu or the Help screen is displayed, the menu or the Help screen that is displayed is closed. • Freeze still works while E-Zoom is being used.
Projection Functions 69 Enlarging Part of the Image (E-Zoom) b This is useful when you want to expand images to see them in greater detail, such as graphs and tables. a Remote control ) to the area of the image that you want to enlarge. Remote control When any pair of adjacent [ Start E-Zoom. Press the [z] button to display the Cross ( Move the Cross ( ], [ ], [ ], or [ ] buttons are pressed at the same time, the pointer can be moved diagonally. ). c Enlarge.
Projection Functions 70 Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse) You can control the computer's mouse pointer from the projector's remote control. This function is called Wireless Mouse. • HDMI s "Switching to the Target Image Using the Remote Control" p.41 Once set, the mouse pointer can be controlled as follows. Moving the mouse pointer The following operating systems are compatible with Wireless Mouse.
Projection Functions a • When any pair of adjacent [ 71 ], [ ], [ ], or [ ] buttons are pressed at the same time, the pointer can be moved diagonally. • If the mouse button settings are set to reverse on the computer, the operation of the remote control buttons will also be reversed. • The Wireless Mouse function does not work under the following conditions. • When Extended - USB Type B is set to anything other than Wireless Mouse/USB Display (EB-485Wi/EB-480i/EB-475Wi only).
Projection Functions 72 d Move the box to select the part of the image to use as the User's Logo. You can perform the same operations from the projector's control panel. Remote control a • When User's Logo Protect from Password Protect is set to On, a message is displayed and the User's Logo cannot be changed. You can make changes after setting User's Logo Protect to Off. s "Managing Users (Password Protect)" p.
Projection Functions f Select the zoom factor from the zoom setting screen. 73 a a When a User Pattern is saved, the previous User Pattern is erased. Project the image you want to use as the User Pattern, and then press the [Menu] button. s "Using the Configuration Menu" p.95 Using Remote Control g When the message "Save this image as the User's Logo?" is displayed, select Yes. The image is saved. After the image has been saved, the message "Completed." is displayed.
Projection Functions 74 Projecting Without a Computer (Slideshow) By connecting a USB storage device such as a USB memory or a USB hard disk to the projector, you can project the files stored on the device without using a computer. This function is called Slideshow. a • You may not be able to use USB storage devices that incorporate security functions. • You cannot correct keystone distortion while projecting a Slideshow, even if you press the [w] and [v] buttons on the control panel.
Projection Functions a • When connecting and using a USB-compatible hard disk, make sure you connect the AC adaptor supplied with the hard disk. • The projector does not support some file systems, so use media that has been formatted in Windows. • Format the media in FAT16/32. Slideshow examples 75 Starting Slideshow a b Change the source to USB. s "Switching to the Target Image Using the Remote Control" p.41 Connect the USB storage device or digital camera to the projector.
Projection Functions a 76 • You can also insert a memory card into a USB card reader and then connect the reader to the projector. However, some commercially available USB card readers may not be compatible with the projector. • If the following screen (Select Drive screen) is displayed, use the [ ], [ ], [ ], and [ ] buttons to select the drive you want to use, and then press the [ ] button.
Projection Functions a b 77 a Play images, or run Slideshow. While projecting, press the [ ] or [ ] button. Start Slideshow. The file list screen is displayed. s "Starting Slideshow" p.75 b Press the [ ], [ ], [ ], and [ ] buttons to select the image file you want to project. Stopping Slideshow To close Slideshow, disconnect the USB device from the USB port on the projector. For devices such as digital cameras or hard disks, turn off the device and then remove it from the projector.
Projection Functions d 78 screen, projection starts again from the beginning when it reaches the end. Press the [Esc] button to return to the file list screen. s "Image file display settings and Slideshow operation settings" p.78 Projecting image files in a folder in sequence (Slideshow) You can proceed to the next screen, return to the previous screen, or stop playback while projecting a Slideshow. You can project the image files in a folder in sequence, one at a time.
Projection Functions b When the following Option screen is displayed, set each of the items. Enable the settings by positioning the cursor on the target item and pressing the [ ] button. The following table shows the details for each item. Display Order You can select to display the files in Name Order or Date Order. Sort Order You can select to sort the files In Ascending or In Descending order. Continuous Play You can set whether to repeat the Slideshow.
Security Functions The projector has the following enhanced security functions. • Password Protect You can limit who can use the projector. • Control Panel Lock You can prevent people changing the settings on the projector without permission. s "Restricting Operation (Control Panel Lock)" p.82 • Anti-Theft Lock The projector is equipped with the following anti-theft security device. s "Anti-Theft Lock" p.
Security Functions a 81 • If Password Protect is already activated, you must enter the password. If the password is entered correctly, the Password Protect setting menu is displayed. s "Entering the Password" p.81 (3) While holding down the [Num] button, enter a four digit number using the numeric buttons. The number entered is displayed as "* * * *". When you enter the fourth digit, the confirmation screen is displayed.
Security Functions When you enter the correct password, Password Protect is temporarily released. Attention • If an incorrect password is entered three times in succession, the message "The projector's operation will be locked." is displayed for approximately five minutes, and then the projector switches to standby mode. If this happens, disconnect the power plug from the electrical outlet and then reinsert it and turn the projector's power back on.
Security Functions 83 Anti-Theft Lock The projector is equipped with the following types of anti-theft security devices. d Select Yes when the confirmation message is displayed. The control panel buttons are locked according to the setting you chose. a You can release the control panel lock by one of the following two methods. • Select Off from Control Panel Lock. s Settings - Control Panel Lock p.
Monitoring and Controlling About EasyMP Monitor EasyMP Monitor lets you carry out operations such as checking the status of multiple Epson projectors that are connected to a network at a computer monitor, and controlling the projectors from the computer. You can download EasyMP Monitor from the following Web site. http://www.epson.com The following provides brief descriptions of the monitoring and control functions that can be carried out using EasyMP Monitor.
Monitoring and Controlling Items in the Configuration menu that cannot be set by a Web browser • Settings menu - Keystone - Quick Corner • Settings menu - Image Shift • Settings menu - Pointer Shape • Settings menu - Pattern (except Pattern Type) • Settings menu - User Button • Extended menu - User's Logo • Extended menu - USB Type B • Extended menu - Easy Interactive Function • Extended menu - Language • Extended menu - Operation - High Altitude Mode • Reset menu - Reset All and Reset Lamp Hours The sett
Monitoring and Controlling 86 Name F [Page] buttons [Up] [Down] Function Changes pages in files such as PowerPoint files when using the following projection methods. • When using the Wireless Mouse function s "Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse)" p.70 • When using USB Display s "Projecting with USB Display" p.41 • When connecting to a network When projecting images using Slideshow, pressing these buttons displays the previous/next image file.
Monitoring and Controlling Using the Mail Notification Function to Report Problems When you set Mail Notification, notification messages are sent to the preset email addresses when a problem or warning occurs with a projector. This will enable the operator to be notified of problems with projectors even at locations away from the projectors. s Network - Mail - Mail Notification p.111 a 87 The details of the problem are listed line by line. The main message contents are listed below.
Monitoring and Controlling a 88 Item • SNMP should be managed by a network administrator or someone who is familiar with the network. • To use the SNMP function to monitor the projector, you need to install the SNMP manager program on your computer. • The managing function using SNMP cannot be used via wireless LAN in Quick connection mode. • Up to two destination IP addresses can be saved. ESC/VP21 Commands You can control the projector from an external device using ESC/VP21.
Monitoring and Controlling 89 • Projector input port name: RS-232C About PJLink PJLink Class1 was established by the JBMIA (Japan Business Machine and Information System Industries Association) as a standard protocol for controlling network-compatible projector's as part of their efforts to standardize projector control protocols. The projector complies with the PJLink Class1 standard established by the JBMIA.
Monitoring and Controlling 90 Source PJLink Command LAN INPT 52 USB Display INPT 53 • Monitoring and control with application software You can use Crestron RoomView Express or Crestron RoomView Server Edition provided by Crestron to monitor devices in the system, to communicate with the help desk, and to send emergency messages. See the following Web site for details. http://www.crestron.
Monitoring and Controlling a b 91 Start a Web browser on the computer. Enter the IP address of the projector in the address field of the Web browser, and press the Enter key on the keyboard. Button Function Turns the video and audio on or off. s "Hiding the Image and Sound Temporarily (A/V Mute)" p.67 A/V Mute The operation window is displayed. B Switch to the image from the selected input source. To display input sources that are not shown on the screen, click (a) or (b) to scroll up or down.
Monitoring and Controlling Button 92 Function OK Performs the same operation as the [ remote control. s "Remote Control" p.16 Menu Displays and closes the Configuration menu. Auto If clicked while projecting analog RGB signals from Computer1 port or Computer2 port, automatically optimizes the image by adjusting the Tracking, Sync., and Position. Search Switches to the image from the input port where video signals are being input.
Monitoring and Controlling Item 93 Function DHCP Select the Enabled check box to use DHCP. You cannot enter an IP address if DHCP is enabled. IP Address Enter the IP address to assign to the currently connected projector. Subnet Mask Enter a subnet mask for the currently connected projector. Default Gateway Enter the gateway address for the currently connected projector. Send Click this button to confirm the changes made to the Projector.
Configuration Menu This chapter explains how to use the Configuration menu and its functions.
Using the Configuration Menu This section explains how to use the Configuration menu. Although steps are explained using the remote control as an example, you can perform the same operations from the control panel. Check the guide under the menu for the available buttons and their operations. a b 95 c Select a submenu item. d Change settings. e Press the [Menu] button to finish making settings. Display the Configuration menu screen. Select a top menu item.
List of Functions 96 Top Menu Name Configuration Menu Table Submenu Name Video Signal Auto, NTSC, NTSC4.43, PAL, M-PAL, N-PAL, PAL60, and SECAM Aspect Normal, Auto, 4:3, 16:9, Full, Zoom, and Native Overscan Auto, Off, 4%, and 8% Keystone H/V-Keystone and Quick Corner Zoom 0 (Wide) to 40 (Tele) Settable items vary depending on the model being used and the image signal and source being projected. Top Menu Name Image menu s p.98 Signal menu s p.
List of Functions Top Menu Name 97 Submenu Name Items or Setting Values Standby Setup Standby Mode, Standby Microphone, Standby Audio USB Type B Easy Interactive Function, USB Display/Easy Interactive Function, Wireless Mouse/USB Display Easy Interactive Func‐ Auto Calibration, Manual tion Calibration, Use Source, Number of Pen Users, Pen Operation Mode, Enable Right Click, Advanced Info menu s p.114 Reset menu s p.115 * Network menu Top Menu Name Basic menu s p.107 Wireless LAN menu s p.
List of Functions Top Menu Name Mail menu s p.111 98 Submenu Name Items or Setting Values IP Address Display On and Off Mail Notification On and Off SMTP Server - Port Number - s "Automatically Detect Input Signals and Change the Projected Image (Source Search)" p.40 Address 1 Setting, Ad‐ dress 2 Setting, and Ad‐ dress 3 Setting Others menu s p.
List of Functions 99 Sub-menu Function Abs. Color Temp. (This item cannot be selected if Color Mode is set to sRGBg.) You can adjust the overall tint of the image. You can adjust tints in 10 stages from 5000 K to 10000 K. The image is tinted blue when a high value is selected and tinted red when a low value is selected. Color Adjust‐ ment (This item cannot be selected if Color Mode is set to sRGBg.) You can adjust the color strength for Red, Green, and Blue individually.
List of Functions Sub-menu 100 Function Sub-menu Function Resolution (Only available when analog RGB computer signals are being input.) Set to Auto to automatically identify the resolution of the input signal. If images are not projected correctly when set to Auto, for example if some of the image is missing, adjust to Wide for wide screens, or set to Normal for 4:3 or 5:4 screens depending on the connected computer.
List of Functions Sub-menu Reset 101 Function You can reset all adjustment values on the Signal menu to their default settings, except for Input Signal. See the following to return all menu items to their default settings. s "Reset Menu" p.115 Sub-menu Function Image Shift Starts Image Shift. s "Adjusting the Position of the Image (Image Shift)" p.48 Control Panel Lock You can use this to restrict operation of the projector's control panel. s "Restricting Operation (Control Panel Lock)" p.
List of Functions 102 Sub-menu Function Remote Receiver You can limit the reception of the operation signal from the remote control. When set to Off, you cannot perform any operations from the remote control. If you want to make operations from the remote control, hold down the [Menu] button on the remote control for at least 15 seconds to reset the setting to its default value.
List of Functions 103 Sub-menu Extended Menu Sub-menu Function Display You can make settings related to the projector's display. Messages: When set to Off, the following items will not be displayed. Item names when the Source, Color Mode, or Aspect Ratio is changed, messages when no signal is being input, and warnings such as High Temp Warning. Display Background*1: You can set the screen status for when no image signal is available to Black, Blue, or Logo.
List of Functions Sub-menu Standby Setup 104 Function Sub-menu Function Standby Mode: When set to Communication On, you can perform the following operations even if the projector is in standby mode. • Monitoring and controlling the projector over the network. s "Monitoring and Controlling" p.84 • Outputting analog RGB signals from the Computer1 port to an external monitor. • Outputting audio from the microphone to the projector's speaker. (Only when the Standby Microphone is set to On.
List of Functions 105 Sub-menu Function Easy Interactive Function (EB-485Wi/ EB-480i/ EB-475Wi only) Allows you to use and set the Easy Interactive Function. s "Easy Interactive Function (EB-485Wi/EB-480i/ EB-475Wi only)" p.57 Items in General • Auto Calibration: Starts Auto Calibration. • Manual Calibration: Starts Manual Calibration. Items in Computer Interactive s p.65 • Use Source: Allows you to set the image source for Easy Interactive Tools and so on.
List of Functions 106 Sub-menu Function Net. Info. - Wire‐ less LAN Displays the following network setting status information. • Connection Mode • Antenna Level • Projector Name • SSID • DHCP • IP Address • Subnet Mask • Gateway Address • MAC Address • Region Code* Net. Info. Wired LAN Network Config‐ uration * Displays the following network setting status information.
List of Functions 107 Basic menu • Each time the CAPS key is selected and the [ ] button is pressed, it switches between upper case and lower case. • Each time the SYM1/2 key is selected and the [ ] button is pressed, it sets and changes the symbol keys for the section enclosed by the frame. Sub-menu Function Projector Name Displays the projector name used to identify the projector when connected to a network. When editing, you can enter up to 16 single-byte alphanumeric characters.
List of Functions Sub-menu Projector Key‐ word 108 Function When set to On, you have to enter the keyword when you try to connect the projector to a computer via a network. As a result, you can prevent presentations from being interrupted by connections from other computers. Normally this should be set to On. s EasyMP Network Projection Operation Guide Sub-menu Connection Mode Set the connection mode when using EasyMP Network Projection to connect the projector and computer.
List of Functions Sub-menu IP Settings 109 Function (This can be set only if Connection Mode is set to Advanced.) You can make network settings. DHCP: Set to On to make network settings using DHCPg. If this is set to On, you cannot set any more addresses. IP Address: You can input the IP addressg assigned to the projector. You can enter a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used. 0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.
List of Functions 110 Sub-menu Function Encryption Key 1/Encryption Key 2/Encryption Key 3/Encryption Key 4 You can enter the key used for WEP encryption. Enter the key in single-byte characters following instructions from the network administrator for the network in which the projector participates. The type of character and the number that can be entered differ according to the WEP Encryption and Format settings. 128Bit - ASCII: Single-byte alphanumerics, 13 characters.
List of Functions Wired LAN menu 111 Sub-menu Function IP Settings You can make settings related to the following addresses. DHCPg: Set to On to configure the network using DHCP. If this is set to On, you cannot set any more addresses. IP Addressg: You can input the IP address assigned to the projector. You can input a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used. 0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.
List of Functions 112 s "Using the Mail Notification Function to Report Problems" p.87 Sub-menu Function Mail Notification Set to On to send an email to the preset addresses when a problem or warning occurs with a projector. SMTP Server You can input the IP addressg for the SMTP server for the projector. You can enter a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used. 127.x.x.x, 224.0.0.0 to 255.255.255.
List of Functions 113 Others menu Sub-menu Function Crestron Room‐ View Set this to On only when monitoring or controlling the projector over the network using Crestron RoomView . Otherwise, set this to Off. s "About Crestron RoomView " p.90 When this is set to On, the following functions are not available. • Web control • Message Broadcasting (EasyMP Monitor Plug-in) ® ® Bonjour Sub-menu Function SNMP Set to On to monitor the projector using SNMP.
List of Functions 114 s "Automatically Detect Input Signals and Change the Projected Image Reset menu (Source Search)" p.40 Resets all of the network settings. Sub-menu Sub-menu Reset network settings. Lamp Hours You can display the cumulative lamp operating time*. When it reaches the lamp warning time, the characters are displayed in yellow. Source You can display the source name for the connected equipment currently being projected.
List of Functions Sub-menu 115 Function Status This information is about errors that have occurred with the projector. It may be needed if service is required. Serial Number Displays the projector's serial number. Event ID Displays the application error log. s "About Event ID" p.135 * The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours and above is displayed as "10H", "11H", and so on.
Troubleshooting This chapter describes how to identify problems and what to do if a problem is found.
Using the Help 117 If a problem occurs with the projector, the Help screen is displayed to assist you by pressing the Help button. You can solve problems by answering the questions. a c Confirm the selection. Using Remote Control Using the Control Panel Press the [Help] button. The Help screen is displayed. Using Remote Control Using the Control Panel Questions and solutions are displayed as shown on the screen below. Press the [Help] button to exit the Help. b Select a menu item.
Problem Solving 118 If you are having a problem with the projector, first check the projector's indicators and see "Reading the Indicators". See the following if the indicators do not show clearly what the problem might be. s "When the Indicators Provide No Help" p.122 Reading the Indicators The projector is provided with the following three indicators that indicate the operating status of the projector. A Power indicator Indicates the operating status.
Problem Solving 119 C Temp indicator Indicates the internal temperature status. See the following table for the status of indicators and how to resolve the problems. If all indicators are off, check that the power cord is connected correctly and that the power is being supplied normally. Sometimes, when the power cord is unplugged, the [t] indicator remains lit for a short period, but this is not an error.
Problem Solving Status 120 Cause Remedy or Status If it is not cracked: Reinstall the lamp and turn on the power. If the error continues: Replace the lamp with a new one and then turn on the power. If the error continues: Stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or the nearest address provided in the Epson Projector Contact List.
Problem Solving a 121 • See the following if the projector is not operating properly, even though the indicators are all showing normal. s "When the Indicators Provide No Help" p.122 • If the indicators are in a state not shown in this table, stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or the nearest address provided in the Epson Projector Contact List.
Problem Solving 122 Problems Relating to the Easy Interactive Function When the Indicators Provide No Help If any of the following problems occur and the indicators do not offer a solution, refer to the pages given for each problem. Problems Relating to Images s p.123 • No images appear Projection does not start, the projection area is completely black, or the projection area is completely blue. s p.
Problem Solving 123 Problems Relating to Images No images appear Check Remedy Did you press the [t] button? Press the [t] button to turn the power on. Are all of the indicators off? The power cord is not connected correctly or power is not being supplied. Connect the projector's power cord correctly. s "From Installation to Projection" p.39 Check the breaker and so on to ensure power is being supplied. Is A/V Mute active? Press the [A/V Mute] button on the remote control to cancel A/V Mute.
Problem Solving 124 Moving images are not displayed (only the moving image portion turns black) Check Is the computer's image signal being output to the LCD and the monitor? (Only when projecting images from a laptop computer or a computer with a built-in LCD screen) Remedy Change the image signal from the computer to external output only. Check your computer's documentation, or contact the computer's manufacturer.
Problem Solving 125 Check Remedy Is the power of the connected computer or video equipment turned Turn the power on for the equipment. on? Are the image signals being output to the projector? (Only when projecting images from a laptop computer or a computer with a built-in LCD screen) If the image signals are only being output to the computer's LCD monitor or accessory monitor, change the output so that the image signals are also output externally.
Problem Solving 126 Interference or distortion appear in images Check Remedy Is the image signal format setting correct? (Only when projecting images from a video source) Change the setting according to the signal for the connected equipment. s Signal - Video Signal p.99 Are the cables connected correctly? Check that all the cables required for projection are securely connected. s "Connecting Equipment" p.
Problem Solving 127 Check Is the image still being enlarged by E-Zoom? Is the display position adjusted correctly? Remedy Press the [Esc] button on the remote control to cancel E-Zoom. s "Enlarging Part of the Image (E-Zoom)" p.69 (Only when projecting analog RGB signals input from the Computer1 or Computer2 port) Press the [Auto] button on the remote control or the [ ] button on the control panel to adjust the position. You can also adjust the position from the Configuration menu.
Problem Solving 128 Check Remedy Is color adjustment set to an appropriate value? Adjust the Color Adjustment setting from the Configuration menu. s Image - Color Adjustment p.98 Are the color saturation and tint adjusted correctly? (Only when projecting images from a video source) Adjust the Color Saturation and Tint settings from the Configuration menu. s Image - Color Saturation, Tint p.
Problem Solving 129 Check Remedy Do the indicators turn on and off when the power cord is touched? There is probably a poor contact in the power cord, or the power cord may be defective. Reinsert the power cord. If this does not solve the problem, stop using the projector, disconnect the power cord from the electrical outlet, and contact your local dealer or the nearest address provided in the Epson Projector Contact List.
Problem Solving 130 Cannot operate as a mouse and draw by connecting to a computer Check Remedy Is Extended set correctly? Make the following settings to link with the computer's functions. • Set Extended - USB Type B to Easy Interactive Function or USB Display/Easy Interactive Function from the configuration menu. • Set the source where the computer is connected in Extended - Easy Interactive Function - Use Source from the configuration menu. s Extended - Easy Interactive Function p.
Problem Solving 131 Check Has pen calibration been performed correctly? Remedy Make sure you perform pen calibration when using the Easy Interactive Pen for the first time so that the projector recognizes the position of the pen correctly. Also, calibrate the pen again if you notice any discrepancy in positioning. s "Calibrating the pen" p.
Problem Solving 132 Other Problems No sound can be heard or the sound is faint Check Remedy Check that the audio/video cable is securely attached to both the projector and audio source. Disconnect the cable from the audio input port, and then reconnect the cable. Is the projector volume set to the minimum? Adjust the volume so that sound can be heard. s Settings - Volume p.101 s "Adjusting the Volume" p.
Problem Solving 133 Check Are you using a plug-in power type microphone? Remedy The projector does not support plug-in power type microphones. Use a commercially available dynamic microphone. s Settings - Mic Input Level p.101 The remote control does not work Check Remedy Is the remote control light-emitting area pointing towards the remote receiver on the projector during operation? Point the remote control towards the remote receiver during operation. s "Remote control operating range" p.
Problem Solving 134 Mail is not received even if an error occurs with the projector Check Remedy Is Standby Mode set to Communication On? To use the Mail Notification function when the projector is in standby, set Communication On in Standby Mode from the Configuration menu. s Extended - Standby Setup - Standby Mode p.103 Did a fatal abnormality occur and the projector come to a sudden stop? When the projector comes to a sudden stop, email cannot be sent.
About Event ID 135 Check the numbers and then apply the following countermeasures. If you cannot resolve the problem, contact your network administrator, or contact your local dealer or the nearest address provided in the Epson Projector Contact List. s Epson Projector Contact List Event ID Cause Remedy 0432 0435 Failed to startup EasyMP Network Projection. Restart the projector. 0434 0482 0484 0485 Network communication is unstable.
Maintenance This chapter provides information on maintenance procedures to ensure the best level of performance from the projector for a long time to come.
Cleaning You should clean the projector if it becomes dirty or if the quality of projected images starts to deteriorate. Attention 137 Attention Do not rub the lens with harsh materials or subject the lens to shocks, as it can easily become damaged. Turn off the projector's power before cleaning. Cleaning the Obstacle Sensor Cleaning the Projector's Surface Clean the projector's surface by wiping it gently with a soft cloth.
Cleaning Attention Do not rub the obstacle sensor with harsh materials or subject the sensor to shocks. Damage on the surface of the sensor may cause malfunctions. Cleaning the Air Filter Clean the air filter and the air intake vent when the following message is displayed. "The projector is overheating. Make sure nothing is blocking the air vent, and clean or replace the air filter.
Replacing Consumables This section explains how to replace the lamp and the air filter. 139 • The lamp indicator flashes orange. Replacing the Lamp Lamp replacement period It is time to replace the lamp when: • The following message is displayed. "It is time to replace your lamp. Please contact your Epson projector reseller or visit www.epson.com to purchase." • The projected image gets darker or starts to deteriorate. Attention The message is displayed for 30 seconds.
Replacing Consumables 140 How to replace the lamp The lamp can be replaced even when the projector is suspended from a wall or ceiling. Warning • When replacing the lamp because it has stopped working, there is a possibility that the lamp may be cracked. When replacing the lamp of a projector that has been installed on a wall or ceiling, assume that the lamp is cracked and stand to the side of the lamp cover, not underneath it. Also, remove the lamp cover gently. • Never disassemble or modify a lamp.
Replacing Consumables 141 e Install the new lamp. Insert the new lamp along the guide rail in the correct direction so that it fits in place, push in firmly, and then press the handle down. Tighten the two lamp fixing screws. ② ① d Remove the old lamp by pulling the handle. If the lamp is cracked, replace it with a new lamp, or contact your local dealer for further advice. s Epson Projector Contact List ① ② f Attach the lamp cover.
Replacing Consumables 142 a Only reset the lamp hours after the lamp has been replaced. Otherwise, the lamp replacement period will not be indicated correctly. Replacing the Air Filter Air filter replacement period If the message is displayed frequently even though the air filter has been cleaned, replace the air filter. How to replace the air filter The air filter can be replaced even when the projector is suspended from a wall or ceiling. Attention • Make sure you install the lamp securely.
Replacing Consumables 143 d c Remove the air filter. Grip the tab in the center of the air filter, and pull the air filter straight out. Install the new air filter.
Replacing Consumables e Close the air filter cover. 144 a Dispose of used air filters properly in accordance with your local regulations.
Appendix
Optional Accessories and Consumables The following optional accessories and consumables are available. Please purchase these products as and when needed. The following list of optional accessories and consumables is current as of: November 2011. Details of accessories are subject to change without notice. 146 Easy Interactive Pen ELPPN03A/ELPPN03B (EB-485Wi/EB-480i/EB-475Wi only) Pens for the Easy Interactive Function. You cannot use Easy Interactive Pens with the same model number at the same time.
Screen Size and Projection Distance 147 C The distance between the projector and the bottom of the screen (when mounting on a wall or ceiling, or installing vertically) The distance between the projector and the top of the screen (when placing on a surface such as a desk) Projection Distance (For EB-485Wi/EB-485W/ EB-475Wi/EB-475W) Unit: cm 16:10 Screen Size * A B C Minimum (Wide) to Maximum (Tele) Minimum (Wide) Minimum (Wide) 60" 129x81 35 - 48 10 91 70" 151x94 41 - 56 13 107 80" 17
Screen Size and Projection Distance 148 Unit: cm 16:9 Screen Size * A B C Minimum (Wide) to Maximum (Tele) Minimum (Wide) Minimum (Wide) 59" 131x74 35 - 48 14 88 60" 133x75 36 - 49 14 89 70" 155x87 42 - 58 18 105 80" 177x100 49 - 60 22 121 90" 199x112 55 - 60 25 137 97" 215x121 60* 28 149 A Projection distance B The distance between the projector and the top of the screen (when mounting on a wall or ceiling, or installing vertically) The distance between the projector
Screen Size and Projection Distance 149 Unit: cm 16:9 Screen Size A B C Minimum (Wide) to Maximum (Tele) Minimum (Wide) Minimum (Wide) 52" 115x65 35 - 49 19 83 60" 133x75 41 - 56 23 97 70" 155x87 48 - 60 27 115 80" 177x100 56 - 60 32 132 85" 188x106 59 - 60 35 141
Supported Monitor Displays 150 Component Video Supported Resolutions Computer signals (analog RGB) Signal Refresh Rate (Hz) Resolution (dots) SDTV (480i) 60 720x480 Signal Refresh Rate (Hz) Resolution (dots) SDTV (576i) 50 720x576 VGA 60/72/75/85 640x480 SDTV (480p) 60 720x480 SVGA 56/60/72/75/85 800x600 SDTV (576p) 50 720x576 XGA 60/70/75/85 1024x768 HDTV (720p) 50/60 1280x720 WXGA 60 1280x768 HDTV (1080i) 50/60 1920x1080 60 1366x768 60/75/85 1280x800 WXGA+ 60/7
Supported Monitor Displays Signal 151 Refresh Rate (Hz) Resolution (dots) 60 1280x960 60 1280x1024 SXGA+ 60 1400x1050 SDTV (480i/480p) 60 720x480 SDTV (576i/576p) 50 720x576 HDTV (720p) 50/60 1280x720 HDTV (1080i) 50/60 1920x1080 HDTV (1080p) 24/30/50/60 1920x1080 SXGA *1 EB-485Wi/EB-485W/EB-475Wi/EB-475W only *2 Only compatible when Wide is selected as the Resolution from the Configuration menu.
Specifications 152 Projector General Specifications Product name EB-485Wi EB-485W EB-480i 367 (W) x 143 (H) x 375 (D) mm (not including raised section) Dimensions 0.59" Wide LCD panel size 0.55" Polysilicon TFT active matrix Display method 1,024,000 WXGA (1280 (W)x 800 (H) dots)x 3 Resolution 786,432 XGA (1024 (W) x 768 (H) dots)x 3 Focus adjustment Manual Zoom adjustment Digital (1-1.35) UHE lamp, 215 W Model No.: ELPLP71 Lamp 16 W Max.
Specifications Product name 153 EB-475Wi EB-475W 367 (W) x 143 (H) x 375 (D) mm (not including raised section) Dimensions 0.59" Wide LCD panel size 0.55" Polysilicon TFT active matrix Display method 1,024,000 WXGA (1280 (W) x 800 (H) dots)x 3 Resolution Focus adjustment Manual Zoom adjustment Digital (1-1.35) 16 W Max. audio output 1 Speaker 100-240V AC±10% 50/60Hz 2.9-1.3A Power supply 100 to 120 V area Operating: 287 W Standby power consumption (Communication On): 7.
Specifications Connectors 154 Computer1 port 1 Mini D-Sub15-pin (female) Computer2 port 1 Mini D-Sub15-pin (female) Video port 1 RCA pin jack S-Video port 1 Mini DIN 4-pin Audio1 port 1 Stereo mini pin jack Audio2 port 1 Stereo mini pin jack Audio-L/R port 1 RCA pin jack x 2 (L-R) Mic port 1 Stereo mini pin jack Audio Out port 1 Stereo mini pin jack Monitor Out port 1 Mini D-Sub15-pin (female) HDMI port 1 HDMI (Audio is only supported by PCM) USB-A port * 1 USB connecto
Specifications This product is also designed for IT power distribution system with phase-to-phase voltage 230V. Angle of tilt If you use the projector tilted at an angle of more than 5˚ it could be damaged and cause an accident.
Specifications 156 DECLARATION of CONFORMITY According to 47CFR, Part 2 and 15 Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers We: Located at: Tel: Epson America, Inc. 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806 562-290-5254 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device.
Appearance 157 Units: mm
Appearance 158 Without feet With feet Units: mm
Glossary 159 This section briefly explains the difficult terms that are not explained in the text of this guide. For details, refer to other commercially available publications. AMX Device Discovery AMX Device Discovery is a technology developed by AMX to facilitate AMX control systems for easy operation of the target equipment. Epson have implemented this protocol technology, and have provided a setting to enable the protocol function (ON). See the AMX Web site for more details. URL http://www.amx.
Glossary 160 SNMP An abbreviation for Simple Network Management Protocol, which is the protocol for monitoring and controlling devices such as routers and computers connected to a TCP/IP network. sRGB An international standard for color intervals that was formulated so that colors that are reproduced by video equipment can be handled easily by computer operating systems (OS) and the Internet. If the connected source has an sRGB mode, set both the projector and the connected signal source to sRGB.
General Notes All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein.
General Notes 162 General Notice: IBM, DOS/V, and XGA are trademarks or registered trademarks of International Business Machines Corp. Macintosh, Mac, Mac OS, and iMac are trademarks of Apple Inc. Microsoft, Windows, Windows NT, Windows Vista, PowerPoint, and Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. eneloop is a registered trademark of Sanyo Electronic Co., Ltd. WPA and WPA2 are registered trademarks of Wi-Fi Alliance.
Index 163 A A/V Mute ...................................................... 67 Abs. Color Temp. ........................................ 99 Air exhaust vent ........................................... 10 Air filter replacement period ................... 142 Aspect .................................................... 52, 100 Audio Input ................................................ 103 Auto Iris .................................................. 52, 99 Auto Setup ........................................
Index 164 Projection ................................................... 103 Projection window ...................................... 11 Projector Keyword .................................... 108 Projector Name .......................................... 107 Projector setup ............................................. 84 Mouse pointer .............................................. 70 N Network Configuration ............................ Network information ................................ Network menu ..
Index USB-B port ................................................... 12 User Button ................................................ 102 User Pattern .................................................. 73 User's Logo ................................................... 71 User's Logo Protect ...................................... 80 V Video port ..................................................... 13 Video Signal ....................................... 100, 114 Volume ......................................
