User`s guide

About EasyMP Monitor
EasyMP Monitor lets you carry out operations such as checking the status
of multiple Epson projectors that are connected to a network at a computer
monitor, and controlling the projectors from the computer.
You can download EasyMP Monitor from the following Web site.
http://www.epson.com
About Message Broadcasting
Message Broadcasting is plugin software for EasyMP Monitor.
Message Broadcasting can be used to send a message (JPEG file) to project
on all Epson projectors or specified projectors connected on the network.
The data can be sent manually, or sent automatically using Timer Settings
of EasyMP Monitor.
Download the Message Broadcasting software from the following website.
http://www.epson.com
Changing Settings Using a Web Browser (Web
Control)
By using the Web browser of a computer connected to the projector on a
network, you can make settings and control the projector. This function
allows you to perform setup and control operations remotely. In addition,
since you can use the computer's keyboard, entering characters required for
the setup is easier.
Use Internet Explorer 8.0 or later as the Web browser. If using a Mac OS
X, use Safari.
a
If you set Standby Mode to Communication On, you can use the
Web browser to make settings and perform control even if the
projector is in standby mode (when the power is off).
s Extended - Standby Mode p.78
Projector setup
In the Web browser, you can set items that are usually set in the projector's
Configuration menu. The settings are reflected in the Configuration menu.
Items in the Configuration menu that cannot be set by the Web browser
• Settings Menu - User Button
• Extended Menu - Display - Menu Position, Panel Alignment, Color
Uniformity
• Extended Menu - User's Logo
• Extended Menu - Operation - High Altitude Mode
• Extended Menu - Language
• Reset Menu
The settings for items on each menu are the same as the projector's
Configuration menu.
s "Configuration Menu" p.70
Displaying the Web Control screen
Use the following procedure to display the Web Control screen.
Make sure the computer and projector are connected to the network.
Set Connection Mode to Advanced from the Configuration menu.
s Network - Wireless LAN - Connection Mode p.84
Monitoring and Controlling
127