User`s guide

Configuration Menu Table
Settable items vary depending on the model being used and the image
signal and source being projected.
Top Menu Name Submenu Name Items or Setting Values
Image menu
s p.74
Color Mode Dynamic, Presentation, Theatre,
Photo, Sports, sRGB, DICOM
SIM, Multi-Projection, 3D
Dynamic
*
, 3D Presentation
*
, 3D
Theatre
*
, and 3D Multi-
Projection
*
Brightness -24 - 24
Contrast -24 - 24
Color Saturation -32 - 32
Tint -32 - 32
Sharpness -5 to 5, and Advanced
Abs. Color Temp. 5000K to 10000K
Advanced Gamma, RGB, and RGBCMY
Auto Iris Off, Normal, and High Speed
Signal menu
s p.75
Auto Setup On and Off
Resolution Auto, Wide, Normal, Manual
Tracking -
Sync. -
Position -
3D Setup
*
3D Images
Progressive Off, Video, and Film/Auto
Noise Reduction Off, NR1, and NR2
Mosquito NR On and Off
Video Range Auto, Normal, and Expanded
Top Menu Name Submenu Name Items or Setting Values
Input Signal Auto, RGB, and Component
Video Signal Auto, NTSC, NTSC4.43, PAL,
M-PAL, N-PAL, PAL60, and
SECAM
Aspect Normal, Auto, 4:3, 16:9, Full,
Zoom, and Native
Overscan Auto, Off, 4%, and 8%
Image Processing Fast, Fine
DisplayPort EQ Set‐
ting
1, 2
Settings menu
s p.77
Geometric Correction H/V-Keystone, Quick Corner,
Arc Correction, Point Correction
Split Screen -
Control Panel Lock Full Lock, Partial Lock, and Off
Power Consumption Normal, Temp Interlock, and
ECO
Volume 0 - 20
Remote Receiver Front/Rear, Front, Rear, and Off
User Button User Button 1, User Button 2,
and User Button 3
Test Pattern -
Memory Load Memory, Save Memory,
Erase Memory, Rename Memory
Extended menu
s p.78
Display Menu Position, Messages,
Display Background, Startup
Screen, A/V Mute, Air Filter
Notice, Screen, Panel Alignment,
and Color Uniformity
User's Logo -
List of Functions
72