User`s guide

When the Indicators Provide No Help

If any of the following problems occur and the indicators do not offer a

solution, refer to the pages given for each problem.

Problems Relating to Images

• No images appear

Projection does not start, the projection area is completely black,

or the projection area is completely blue.

sp.100

• Moving images are not displayed

Videos played back on a computer are black or no image is

projected, or the video is not played back on the computer.

sp.100

• Projection stops automatically sp.101

• The message "Not supported" is displayed sp.101

• The message "No Signal" is displayed sp.101

• Images are fuzzy, out of focus, or distorted sp.102

• Interference or distortion appear in images sp.102

• The image is truncated (large) or small, the aspect ratio is not

suitable, or the image has been reversed

Only part of the image is displayed, the height and width ratios

of the image are not correct, or the image may appear reversed

from top to bottom or left to right.

sp.103

• Image colors are not right

The whole image appears purplish or greenish, images are black

& white, or colors appear dull.

sp.104

• Images appear dark sp.105

Problems when projection starts

• The projector does not turn on sp.105