User`s guide

Easy Interactive Pen (EB-485Wi/EB-480i/EB-475Wi
Only)
There are two types of Easy Interactive Pens with different colored bottom
sections. You cannot use Easy Interactive Pens with the same colored
bottom sections at the same time.
s "Optional Accessories" p.146
Name Function
A
Pen tip button
• Touch the screen to select an item such as an icon.
• Touch the screen and move to draw on the projected
screen.
• Move over the screen without touching to move the
pointer.
s "Easy Interactive Function (EB-485Wi/EB-480i/
EB-475Wi only)" p.57
s "Optional Accessories" p.146
B
Strap attachment hole
Allows you to attach a commercially available strap.
Name Function
C
Battery indicator
Indicates the remaining battery power when the power is
turned on.
• Turns green for several seconds when the battery is
charged.
• Flashes green for several seconds when the battery is
low.
• Does not light when the battery is exhausted. Change
the battery.
s "Replacing the battery for the Easy Interactive Pen"
p.20
D
Slide switch
Switches the Easy Interactive Pen on and off.
When turned on, it takes a few seconds before the Easy
Interactive Pen is operational.
E
Battery cover
Open this cover when replacing the battery.
s "Replacing the battery for the Easy Interactive Pen"
p.20
Replacing the battery for the Easy Interactive Pen
The battery indicator on the Easy Interactive Pen lights or flashes when the
power is turned on. Does not light or flash when the battery is exhausted.
When the indicator no longer lights or flashes, replace the battery. Use one
of the following types of battery. Other chargeable batteries cannot be
used.
• AA size manganese battery
• AA size alkaline manganese battery
• SANYO eneloop
®
*
(HR-3UTG/HR-3UTGA)
*eneloop
®
is a registered trademark of Sanyo Electronic Co., Ltd.
Attention
Make sure you read the following manual before handling batteries.
s Safety Instructions
Part Names and Functions
20