User`s guide

• If Password Protect is already activated, you must enter the

password.

If the password is entered correctly, the Password Protect

setting menu is displayed.

s "Entering the Password" p.81

• When the password is set, stick the supplied password protect

sticker in a visible position on the projector as a further theft

deterrent.

Select the type of Password Protect you want to set, and then

press the [

] button.

Select On, and then press the [ ] button.

Press the [Esc] button, the screen displayed in step 2 is displayed

again.

Set the password.

(1)

Select Password, and then press the [

] button.

(2)

When the message "Change the password?" is displayed, select Yes and

then press the [

] button. The default password is set to "0000". Change

this to your own desired Password. If you select No, the screen displayed

in step 2 is displayed again.

(3) While holding down the [Num] button, enter a four digit number using

the numeric buttons. The number entered is displayed as "* * * *". When

you enter the fourth digit, the confirmation screen is displayed.

Remote control

(4) Re-enter the password.

The message "Password accepted." is displayed.

If you enter the password incorrectly, a message is displayed prompting

you to re-enter the password.

Entering the Password

When the password entry screen is displayed, enter the password using the

remote control.

While holding down the [Num] button, enter the password by pressing the

numeric buttons.

Security Functions