User`s guide

When you enter the correct password, Password Protect is temporarily

released.

Attention

• If an incorrect password is entered three times in succession, the message

"The projector's operation will be locked." is displayed for approximately five

minutes, and then the projector switches to standby mode. If this happens,

disconnect the power plug from the electrical outlet and then reinsert it and

turn the projector's power back on. The projector displays the password entry

screen again so that you can enter the correct password.

• If you have forgotten the password, make a note of the "Request Code:

xxxxx" number that appears on the screen and contact the nearest address

provided in the Epson Projector Contact List.

s Epson Projector Contact List

• If you continue to repeat the above operation and input the wrong Password

30 times in succession, the following message is displayed and the projector

does not accept any more Password entries. "The projector's operation will be

locked. Contact Epson as described in your documentation."

s Epson Projector Contact List

Restricting Operation (Control Panel Lock)

Do one of the following to lock the operation buttons on the control

panel.

• Full Lock

All of the buttons on the control panel are locked. You cannot perform

any operations from the control panel, including turning the power on or

off.

• Partial Lock

All of the buttons on the control panel, except for the [

t] button, are

locked.

This is useful at events or shows when you want to deactivate all buttons

during projection or at schools when you want to limit button operation.

The projector can still be operated using the remote control.

Press the [Menu] button while projecting.

s "Using the Configuration Menu" p.95

Using Remote Control Using the Control Panel

Select Control Panel Lock from Settings.

Select either Full Lock or Partial Lock according to your purpose.

Security Functions