User`s guide

• Projector input port name: RS-232C

<At the projector> (PC serial cable) <At the computer>

Signal Name Function

GND Signal wire ground

TD Transmit data

RD Receive data

Communications protocol

• Default baud rate setting: 9600 bps

• Data length: 8 bit

• Parity: None

• Stop-bit: 1 bit

• Flow control: None

About PJLink

PJLink Class1 was established by the JBMIA (Japan Business Machine and

Information System Industries Association) as a standard protocol for

controlling network-compatible projector's as part of their efforts to

standardize projector control protocols.

The projector complies with the PJLink Class1 standard established by the

JBMIA.

You need to make network settings before you can use PJLink. See the

following for more information on network settings.

s "Network Menu" p.105

It complies with all commands except for the following commands defined

by PJLink Class1, and agreement was confirmed by the PJLink standard

adaptability verification.

URL:http://pjlink.jbmia.or.jp/english/

• Non-compatible commands

Function PJLink Command

Mute settings Image muting set AVMT 11

Audio muting set AVMT 21

• Input names defined by PJLink and corresponding projector sources

Source PJLink Command

Computer1 INPT 11

Computer2 INPT 12

Video INPT 21

S-Video INPT 22

HDMI INPT 32

USB INPT 41

Monitoring and Controlling