Operation Manual

Attention
• Turn off the equipment you want to connect before connecting. If the input source is on when you connect it to the projector, it could cause a malfunction.
• If the orientation or shape of the plug differs, do not try to force it in. The device could be damaged or could malfunction.
a
• You can also set the port used for audio input from the Configuration menu.
s Extended - A/V Settings - Audio Output p.120
• If audio is not output when an HDMI cable is connected, connect a commercially available audio cable to the audio input port. After connecting the cable, select
the input port you connected to from HDMI Audio Output from the Configuration menu.
s Extended - A/V Settings - HDMI Audio Output p.120
• If the source you want to connect to has an unusually shaped port, use the cable supplied with the device or an optional cable to connect to the projectors.
• When using a commercially available 2RCA(L/R)/stereo mini-pin audio cable, make sure it is labeled "No resistance".
Connecting Equipment
29