User’s Guide
Notations Used in This Guide • Safety indications The documentation and the projector use graphical symbols to show how to use the projector safely. Please understand and respect these caution symbols in order to avoid injury to persons or property. Warning This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.
Contents 3 Notations Used in This Guide . . . . . . . . . . . . . . . . . . . . . . . . 2 Introduction Projector Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 List of Functions by Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick and Easy Set up, Projection, and Storage . . . . . . . . . . . . . . . . . . . . . . . . . Easy writing on a whiteboard or blackboard using the pattern function . . . . . . .
Contents 4 Useful Functions Projection Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Projecting Without a Computer (Slideshow) . . . . . . . . . . . . . . . . . . . . . . . . . . Specifications for files that can be projected using Slideshow . . . . . . . . . . . . . Slideshow examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Slideshow operating methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Problems Relating to Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No images appear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Moving images are not displayed (only the moving image portion turns black) ........................................................ Projection stops automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . "Not supported" is displayed . . . . . . . . . . . . . . . . . . .
Introduction This chapter explains the projector's features and the part names.
Projector Features 7 List of Functions by Model Available functions differ depending on the model being used. See the table below for a list of the functions available for each model.
Projector Features Quick and Easy Set up, Projection, and Storage • • • • Turn the projector on and off by simply plugging in or unplugging. Project onto large screens from a short distance. Make easy height adjustments with one lever. No cool down delay makes it easy to put away. Easy writing on a whiteboard or blackboard using the pattern function You can project ruled lines and grid patterns. This is useful when drawing diagrams on a whiteboard or blackboard. s Settings - Pattern p.
Projector Features Easy connection to a computer with Quick Wireless By simply connecting the optional Quick Wireless Connection USB Key to a computer, you can project the computer's screen. (Windows computers only) Making the most of the remote control You can use the remote control to perform operations such as enlarging part of the image. You can also use the remote control as a pointer during presentations or as a mouse for the computer. s "Pointer Function (Pointer)" p.
Part Names and Functions 10 All of the features in this guide are explained using illustrations of EB-925 unless otherwise mentioned. Front/Top Name A Air exhaust vent Function Exhaust vent for air used to cool the projector internally. Caution While projecting, do not put your face or hands near the air exhaust vent, and do not place objects that may become warped or damaged by heat near the vent. B Remote receiver Receives signals from the remote control.
Part Names and Functions 11 Name Rear Name A HDMI port Function Inputs video signals from HDMI compatible video equipment and computers. This projector is compatible with HDCPg. s "Connecting Equipment" p.22 B Power inlet Connects the power cable to the projector. s "From Installation to Projection" p.30 C S-Video port For S-video signals from video sources. D Video port Inputs composite video signals from video sources.
Part Names and Functions 12 Name Base D Security cable installation point Name Function A Ceiling mount fixing points (three points) Attach the optional Ceiling Mount here when suspending the projector from a ceiling. s "Installing the Projector" p.19 s "Optional Accessories" p.118 B Rear feet When setup on a surface such as a desk, turn to extend and retract to adjust the horizontal tilt. s "Adjusting the Horizontal Tilt" p.
Part Names and Functions 13 Name Control Panel Name D [w][v] buttons • Performs vertical keystone correction. s "Correcting keystone distortion in vertical directions" p.36 • If pressed when the Configuration menu or the Help screen is displayed, these buttons select menu items and setting values. s "Using the Configuration Menu" p.74 s "Using the Help" p.94 E [a][b] button [a] Decreases the volume. [b] Increases the volume. s "Adjusting the Volume" p.
Part Names and Functions Remote Control 14 Name Function A [t] button Turns the projector power on or off. s "From Installation to Projection" p.30 B [Computer] button Each time you press the button, the input changes between images from the Computer1 port and the Computer2 port. C [Video] button Each time the button is pressed, the image cycles through the S-Video, Video, and HDMI ports. D Numeric buttons • Enter the Password. s "Setting Password Protect" p.
Part Names and Functions Name 15 Function Name Function J [E-Zoom] buttons [z][x] Enlarges or reduces the image without changing the projection size. s "Enlarging Part of the Image (E-Zoom)" p.53 O [Volume] buttons [a][b] [a] Decreases the volume. [b] Increases the volume. s "Adjusting the Volume" p.40 K [Menu] button Displays and closes the Configuration menu. s "Using the Configuration Menu" p.74 P [Pointer] button Displays the on-screen pointer. s "Pointer Function (Pointer)" p.
Part Names and Functions Name X Remote control lightemitting area 16 Function Outputs remote control signals. Replacing the remote control batteries If delays in the responsiveness of the remote control occur or if it does not operate after it has been used for some time, it probably means that the batteries are becoming flat. When this happens, replace them with new batteries. Have two AA size manganese or alkaline batteries ready.
Part Names and Functions Caution Check the positions of the (+) and (-) marks inside the battery holder to ensure the batteries are inserted the correct way. c Replace the battery cover. Press the battery compartment cover until it clicks into place.
Preparing the Projector This chapter explains how to install the projector and connect projection sources.
Installing the Projector 19 Installation Methods Warning The projector supports the following four different projection methods. Install the projector according to the conditions of the installation location. • Project images from in front of the screen. (Front projection) • Project images from behind a translucent screen. (Rear projection) • Suspend the projector from the ceiling and project images from in front of a screen.
Installing the Projector • Install the projector so that it is parallel to the screen. If the projector is installed at an angle to the screen, keystone distortion occurs in the projected image. • Place the projector on a level surface. If the projector is tilted the projected image is also tilted. 20 a When you correct keystone distortion, the projected image may be reduced.
Installing the Projector 21 EB-96W EB-900 150” (320×200cm) 150” 100” 100” (220×130cm) 80” 80” 50” (170×110cm) 50” (110×67cm) 5m 4:3 Screen Size EB-925/EB-905 EB-95
Connecting Equipment 22 Illustrations in this section are of EB-925/EB-915W/EB-905/EB-96W/EB-95. The port name, location, and connector orientation differ depending on the source being connected. Connecting a Computer To project images from a computer, connect the computer using one of the following methods. A When using the supplied computer cable Connect the computer's display output port to the projector's Computer1 or Computer2 port.
Connecting Equipment 23 Connecting Image Sources To project images from DVD players or VHS video and so on, connect to the projector using one of the following methods. A When using a commercially available video or S-video cable Connect the video or S-video output port on the image source to the projector's Video or S-Video port. B When using the optional component video cable s "Optional Accessories" p.
Connecting Equipment 24 Attention • If the input source is on when you connect it to the projector, it could cause a malfunction. • If the orientation or shape of the plug differs, do not try to force it in. The device could be damaged or could malfunction. a • If the source you want to connect to has an unusually shaped port, use the cable supplied with the device or an optional cable to connect to the projector.
Connecting Equipment 25 Connecting USB Devices You can connect devices such as USB memory, the optional Document Camera, and USB compatible hard disks and digital cameras. Using the USB cable supplied with the USB device, connect the USB device to the USB(TypeA) port on the projector. When the USB device is connected, you can project image files on the USB memory or digital camera using Slideshow. s "Slideshow examples" p.
Connecting Equipment 26 Removing USB devices After finishing projecting, remove USB devices from the projector. For devices such as digital cameras or hard disks, turn off the device and then remove it from the projector. Connecting External Equipment You can output images and audio by connecting an external monitor or speaker. You can also output microphone audio from the projector's speaker by connecting a microphone.
Connecting Equipment a 27 • If you set Standby Mode to Communication On, you can perform the following operations even if the projector is in standby mode. - Outputting images to an external monitor - Outputting microphone audio from the projector's speaker (only when Standby Microphone is set to On). s Extended - Standby Mode p.81 s Extended - Standby Microphone p.81 • Only analog RGB signals from the Computer1 port can be output to an external monitor.
Connecting Equipment 28 Installing the Wireless LAN Unit a Open the air filter cover. Slide the air filter cover open/close switch, and open the air filter cover. ① ② b d Fix the stopper in place with the screw. e Close the air filter cover. Remove the stopper for the Wireless LAN unit. ① ② c Install the Wireless LAN unit.
Basic Usage This chapter explains how to project and adjust images.
Projecting Images 30 From Installation to Projection This section explains the procedure for connecting the projector to a computer with the computer cable and projecting images. e f Turn on your computer. Change the computer's screen output. When using a laptop computer, you need to change the screen output from the computer. Hold down the Fn key (function key), and press the b key. 4 a The method for changing differs depending on the computer being used.
Projecting Images 31 Automatically Detect Input Signals and Change the Projected Image (Source Search) Press the [Source Search] button to project images from the port currently receiving an image. Because only images from ports receiving an image are projected, you can quickly project the image you want. Using the remote control Using the control panel When two or more image sources are connected, press the [Source Search] button until the target image is projected.
Projecting Images 32 Switching to the Target Image by Remote Control You can change directly to the target image by pressing the following buttons on the remote control. Remote control Projecting with USB Display You can use the commercially available USB cable to connect the projector to a computer to project images from the computer. To start USB Display, set USB Type B to USB Display from the Configuration menu. s Extended - USB Type B p.
Projecting Images 33 Connecting for the first time For Mac OS OS Mac OS X 10.5.1 or later Mac OS X 10.6.x CPU Power PC G4 1GHz or faster Recommended: Core Duo 1.83GHz or faster Amount of Memory 512 MB or more Hard Disk Space 20 MB or more Display Resolution of no less than 640x480 and no higher than 1680x1200. Display color in 16-bit color or greater The first time you connect the projector and the computer using the USB cable, the driver needs to be installed.
Projecting Images a 34 a • If it is not installed automatically, double-click My Computer - EPSON_PJ_UD - EMP_UDSE.EXE on your computer. • If nothing is projected for some reason, click All Programs EPSON Projector - Epson USB Display - Epson USB Display Vx.xx on your computer. • When using a computer running Windows 2000 under user authority, a Windows error message is displayed and you may not be able to use the software.
Projecting Images c Select Epson USB Display and click Uninstall. For Mac OS a b Open the Applications folder, doucle-click USB Display, and then double-click Tool. Run USB Display UnInstaller.
Adjusting Projected Images Correcting Keystone Distortion You can correct keystone distortion using one of the following methods. • Correcting automatically (Auto V-Keystone) Automatically corrects vertical keystone distortion. • Correcting manually (manual H/V-Keystone) Manually correct distortion in the horizontal and vertical directions independently.
Adjusting Projected Images 37 a Press the [Menu] button while projecting. s "Using the Configuration Menu" p.74 Using the remote control Correcting keystone distortion in horizontal directions Press the [ a ][ Using the control panel b Select Keystone from Settings. c Select Quick Corner, and then press the [Enter] button. ] buttons on the control panel. You can set manual H/V-Keystone from the Configuration menu. s Settings - Keystone - H/V-Keystone p.
Adjusting Projected Images 38 e Using the [ ], [ remote control, or the [ ], [ ], [ ], and [ ], [ ] buttons on the ], and [ ] buttons on the control panel, correct the position of the corner. When you press the [Enter] button, the screen shown in step 4 is displayed. If the message "Cannot adjust any further." is displayed while adjusting, you cannot adjust the shape any further in the direction indicated by the gray triangle.
Adjusting Projected Images g 39 When you are done, press the [Esc] button to exit the correction menu. Because Keystone was changed to Quick Corner, the corner selection screen from step 3 is displayed when you press the [ [ ], [ ], and [ T ], W W T ] buttons on the control panel next time. Change Keystone to H/V-Keystone if you want to perform horizontal and vertical correction using the [ [ ], [ ], [ ], and ] buttons on the control panel. s Settings - Keystone - H/V-Keystone p.
Adjusting Projected Images 40 • Press the [Volume] button on the control panel or the remote control to adjust the volume. [a] Decreases the volume. [b] Increases the volume. Using the remote control Using the control panel A Extend the rear foot. B Retract the rear foot. Correcting the Focus • Adjust the volume from the Configuration menu. s Settings - Volume p.80 You can correct the focus using the focus ring. Caution Do not start at high volume.
Adjusting Projected Images Mode 41 Application Presentation Ideal for making presentations using color materials in a bright room. Theatre Ideal for watching films in a dark room. Gives images a natural tone. Photo*1 Ideal for projecting still pictures, such as photos, in a bright room. The images are vivid and brought into contrast. Sports *2 Ideal for watching TV programmes in a bright room. The images are vivid and brought to life.
Adjusting Projected Images c d Select On. The setting is stored for each Color Mode. 42 a You can set the aspect ratio from the Configuration menu. s Signal - Aspect p.78 Press the [Menu] button to finish making settings. a Auto Iris can only be set when the Color Mode is Dynamic or Theatre.
Adjusting Projected Images 43 Projecting images from a computer The following shows projection examples for each aspect mode. Aspect Mode Input Signal XGA 1024X768(4:3) a If parts of the image are missing, set the Resolution setting to Wide or Normal from the Configuration menu, according to the size of the computer panel. s Signal - Resolution p.
Adjusting Projected Images 44 a If parts of the image are missing, set the Resolution setting to Wide or Normal from the Configuration menu, according to the size of the computer panel. s Signal - Resolution p.78 A Auto B 4:3 C 16:9 Projecting images from a computer Each time the [Aspect] button on the remote control is pressed, the aspect mode changes in the order Normal, 4:3, and 16:9. The following shows projection examples for each aspect mode.
Useful Functions This chapter explains useful tips for giving presentations, and the Security functions.
Projection Functions 46 Projecting Without a Computer (Slideshow) By connecting a USB storage device such as a USB memory or a USB hard disk to the projector, you can project the files stored on the device without using a computer. This function is called Slideshow. a • You may not be able to use USB storage devices that incorporate security functions.
Projection Functions b 47 Connect the USB storage device or digital camera to the projector. s "Connecting USB Devices" p.25 Slideshow starts and the file list screen is displayed. a • JPEG files are displayed as thumbnails (file contents are displayed as small images). [ • Other files or folders are displayed as icons as shown in the following table. Icon * File Icon • You can also insert a memory card into a USB card reader and then connect the reader to the projector.
Projection Functions 48 b a ] button. Stopping Slideshow To close Slideshow, disconnect the USB device from the USB port on the projector. For digital cameras, hard disks, and so on, turn off the power to the device and then remove. Press the [Enter] button. The selected image is displayed. When a folder is selected, the files in the selected folder are displayed. To return to the previous screen, position the cursor on Back to Top and press the [Enter] button.
Projection Functions b Press the [ 49 ], [ ], [ ], and [ ] buttons to select the image file you want to project. Projecting image files in a folder in sequence (Slideshow) You can project the image files in a folder in sequence, one at a time. This function is called Slideshow. Use the following procedure to run Slideshow. a To change files automatically when you run Slideshow, set Screen Switching Time from Option in Slideshow to anything other than No. The default setting is 3 seconds.
Projection Functions a 50 If Screen Switching Time on the Option screen is set to No, files do not change automatically when you select Play Slideshow. Press the [ ] button, the [Enter] button, or the [Down] button on the remote control to continue to the next file. You can use the following functions when projecting an image file with Slideshow. • Freeze s "Freezing the Image (Freeze)" p.51 • A/V Mute s "Hiding the Image and Sound Temporarily (A/V Mute)" p.
Projection Functions 51 Hiding the Image and Sound Temporarily (A/V Mute) You can use this when you want to focus the audience's attention on what you are saying, or if you do not want to show details such as when you are changing between files during presentations from a computer. a • If you use this function when projecting moving images, the images and sound continue to be played back by the source, and you cannot return to the point where A/V Mute was activated.
Projection Functions a • Audio does not stop. • For moving images, the images continue to play back while the screen is frozen, so it is not possible to resume projection from the point where the screen was frozen. • If the [Freeze] button is pressed while the Configuration menu or the Help screen is displayed, the menu or the Help screen that is displayed is closed. • Freeze still works while E-Zoom is being used.
Projection Functions 53 Enlarging Part of the Image (E-Zoom) b This is useful when you want to expand images to see them in greater detail, such as graphs and tables. Move the Cross ( ) to the area of the image that you want to enlarge. Remote control When pressed in conjunction with the adjacent [ a Start E-Zoom. Press the [z] button to display the Cross ( Remote control [ ). c ], and [ ], [ ], ] buttons, the pointer can be moved diagonally. Enlarge.
Projection Functions 54 Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse) You can control the computer's mouse pointer from the projector's remote control. This function is called Wireless Mouse. c Set USB Type B to Wireless Mouse. s Extended - USB Type B p.81 Once set, the mouse pointer can be controlled as follows. Moving the mouse pointer [ The following operating systems are compatible with Wireless Mouse.
Projection Functions 55 Page Up/Down [Up] button: Moves to the previous page. [Down] button: Moves to the next page. Saving a User's Logo You can save the image that is currently being projected as a User's Logo. a a • When pressed in conjunction with the adjacent [ [ ], [ ], and [ ], a Once a User's Logo has been saved, the logo cannot be returned to the factory default. Project the image you want to save as the User's Logo, and then press the [Menu] button. s "Using the Configuration Menu" p.
Projection Functions 56 d Move the box to select the part of the image to use as the User's Logo. You can perform the same operations from the projector's control panel. Remote control a • When User's Logo Protect from Password Protect is set to On, a message is displayed and the User's Logo cannot be changed. You can make changes after setting User's Logo Protect to Off. s "Managing Users (Password Protect)" p.
Projection Functions f Select the zoom factor from the zoom setting screen. 57 a Project the image you want to use as the User Pattern, and then press the [Menu] button. s "Using the Configuration Menu" p.74 Using the remote control g When the message "Save this image as the User's Logo?" is displayed, select Yes. b Select Pattern from Settings. c Select User Pattern. The image is saved. After the image has been saved, the message "Completed." is displayed.
Projection Functions a If User Pattern is selected when Keystone, E-Zoom, Aspect, or Zoom adjustment are being performed, the function currently being performed is cancelled. d When "Do you want to use the currently projected image as the User Pattern?" is displayed, select Yes. e When you press the [Enter] button, the message "Do you save this image as the User Pattern?" is displayed. Then, select Yes. The image is saved.
Security Functions The projector has the following enhanced security functions. • Password Protect You can limit who can use the projector. • Control Panel Lock You can prevent people changing the settings on the projector without permission. s "Restricting Operation (Control Panel Lock)" p.61 • Anti-Theft Lock The projector is equipped with the following anti-theft security device. s "Anti-Theft Lock" p.
Security Functions a • If Password Protect is already activated, you must enter the password. If the password is entered correctly, the Password Protect setting menu is displayed. s "Entering the Password" p.60 60 (3) While holding down the [Num] button, enter a four digit number using the numeric buttons. The number entered is displayed as "* * * *". When you enter the fourth digit, the confirmation screen is displayed.
Security Functions When you enter the correct password, Password Protect is temporarily released. Attention • If an incorrect password is entered three times in succession, the message "The projector's operation will be locked." is displayed for approximately five minutes, and then the projector switches to standby mode. If this happens, disconnect the power plug from the electrical outlet and then reinsert it and turn the projector's power back on.
Security Functions 62 Anti-Theft Lock The projector is equipped with the following types of anti-theft security devices. d Select Yes when the confirmation message is displayed. The control panel buttons are locked according to the setting you chose. a You can release the control panel lock by one of the following two methods. • Select Off from Control Panel Lock. s Settings - Control Panel Lock p.
Monitoring and Controlling About EasyMP Monitor EasyMP Monitor lets you carry out operations such as checking the status of multiple Epson projectors that are connected to a network at a computer monitor, and controlling the projectors from the computer. You can download EasyMP Monitor from the following Web site. http://www.epson.com The following provides brief descriptions of the monitoring and control functions that can be carried out using EasyMP Monitor.
Monitoring and Controlling Items in the Configuration menu that cannot be set by a Web browser • Settings menu - Keystone - Quick Corner • Settings Menu - Pointer Shape • Settings Menu - Pattern • Settings Menu - User Button • Extended Menu - User's Logo • Extended Menu - Language • Extended Menu - Operation - High Altitude Mode • Extended Menu - Operation - Lens Cover Timer • Reset Menu - Reset All and Reset Lamp Hours The settings for items on each menu are the same as the projector's Configuration menu
Monitoring and Controlling 65 Name F [Page] buttons [Up] [Down] Function Changes pages in files such as PowerPoint files when using the following projection methods. • When using the Wireless Mouse function s "Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse)" p.54 • When using USB Display s "Projecting with USB Display" p.32 • When connecting to a network When projecting images using Slideshow, pressing these buttons displays the previous/next screen.
Monitoring and Controlling Using the Mail Notification Function to Report Problems When you set Mail Notification, notification messages are sent to the preset email addresses when a problem or warning occurs with a projector. This will enable the operator to be notified of problems with projectors even at locations away from the projectors. s Network - Mail - Mail Notification p.
Monitoring and Controlling a 67 Item • SNMP should be managed by a network administrator or someone who is familiar with the network. • To use the SNMP function to monitor the projector, you need to install the SNMP manager program on your computer. • The managing function using SNMP cannot be used via wireless LAN in Quick connection mode. • Up to two destination IP addresses can be saved. ESC/VP21 Commands You can control the projector from an external device using ESC/VP21.
Monitoring and Controlling 68 • Projector input port name: RS-232C About PJLink PJLink Class1 was established by the JBMIA (Japan Business Machine and Information System Industries Association) as a standard protocol for controlling network-compatible projector's as part of their efforts to standardize projector control protocols. The projector complies with the PJLink Class1 standard established by the JBMIA.
Monitoring and Controlling 69 • Manufacturer name displayed for "Manufacture name information query" ® ® EPSON • Model name displayed for "Product name information query" EB-925/C2080XN/PowerLite 1835 EB-915W/C2070WN/PowerLite 915W EB-910W/C2050WN/PowerLite 910W EB-905/C2060XN/PowerLite 905 EB-900/C2040XN/PowerLite 900 EB-96W/C2030WN/PowerLite 96W EB-95/C2020XN/PowerLite 95 ® a ® Crestron RoomView is an integrated control system provided by Crestron .
Monitoring and Controlling a b 70 Start a Web browser on the computer. Enter the IP address of the projector in the address field of the Web browser, and press the Enter key on the keyboard. Button Function Turns the video and audio on or off. s "Hiding the Image and Sound Temporarily (A/V Mute)" p.51 A/V Mute The operation window is displayed. B Switch to the image from the selected input source. To display input sources that are not shown in Source List, click (a) or (b) to scroll up or down.
Monitoring and Controlling Button 71 Function OK Performs the same operation as the [Enter] button on the remote control. s "Remote Control" p.14 Menu Displays and closes the Configuration menu. Auto If clicked while projecting analog RGB signals from Computer1 port or Computer2 port, automatically optimizes the image by adjusting the Tracking, Sync., and Position. Search Switches to the image from the input port where video signals are being input.
Monitoring and Controlling Item 72 Function DHCP Select the Enabled check box to use DHCP. You cannot enter an IP address if DHCP is enabled. IP Address Enter the IP address to assign to the currently connected projector. Subnet Mask Enter a subnet mask for the currently connected projector. Default Gateway Enter the gateway address for the currently connected projector. Send Click this button to confirm the changes made to the Projector.
Configuration Menu This chapter explains how to use the Configuration menu and its functions.
Using the Configuration Menu This section explains how to use the Configuration menu. Although steps are explained using the remote control as an example, you can perform the same operations from the control panel. Check the guide under the menu for the available buttons and their operations. a 74 c Select a submenu item. ① Display the Configuration menu screen. ② d b Change settings. ① Select a top menu item. ① ① ② ② e Press the [Menu] button to finish making settings.
List of Functions 75 Top Menu Name Configuration Menu Table Submenu Name Video Signal Auto, NTSC, NTSC4.43, PAL, M-PAL, N-PAL, PAL60, and SECAM Aspect Normal, 4:3, 16:9, Full, Zoom, and Native Overscan Auto, Off, 4%, and 8% Keystone H/V-Keystone and Quick Corner Control Panel Lock Full Lock, Partial Lock, and Off Settable items vary depending on the model being used and the image signal and source being projected. Top Menu Name Image menu s p.77 Signal menu s p.
List of Functions Top Menu Name Info menu s p.91 Reset menu s p.92 76 Submenu Name Items or Setting Values Top Menu Name On and Off Connection Mode Quick and Advanced USB Type B USB Display and Wireless Mouse Channel 1ch, 6ch, and 11ch Wireless LAN Sys. 802.11b/g and 802.
List of Functions Top Menu Name 77 Submenu Name Items or Setting Values Address 1 Setting, Ad- dress 2 Setting, and Address 3 Setting Others menu s p.90 SNMP On and Off Trap IP Address 1 and Trap IP Address 2 - Priority Gateway Wired LAN and Wireless LAN s "Automatically Detect Input Signals and Change the Projected Image (Source Search)" p.31 AMX Device Discovery On and Off RoomView On and Off Image Menu Settable items vary depending on the image signal and source currently being projected.
List of Functions 78 Submenu Function Abs. Color Temp. (This item cannot be selected if Color Mode is set to sRGBg.) You can adjust the overall tint of the image. You can adjust tints in 10 stages from 5000 K to 10000 K. The image is tinted blue when a high value is selected and tinted red when a low value is selected. Color Adjustment (This item cannot be selected if Color Mode is set to sRGBg.) You can adjust the color strength for Red, Green, and Blue individually.
List of Functions Submenu Progressive 79 Function (This setting can only be adjusted when a component video or RGB video with an interlaced signal (480i/576i/1080i) is input. This cannot be set when a digital RGB signal is input.) Interlaceg (i) signal is converted to Progressiveg (p). (IP conversion) Off: Ideal for images with a large amount of movement. Video: Ideal for general video images. Film/Auto: This is ideal for movie films, computer graphics, and animation.
List of Functions 80 Submenu Settings Menu Pointer Shape Function You can select the shape of the pointer. Pointer 1: Pointer 2: Pointer 3: s "Pointer Function (Pointer)" p.52 Submenu Keystone Control Panel Lock Function You can correct keystone distortion. • When H/V-Keystone is selected: • Correcting manually Adjust V-Keystone and H-Keystone to correct horizontal and vertical keystone distortion. • Correcting automatically Set Auto V-Keystone to On.
List of Functions 81 Submenu Function User Button You can select and assign an item from the Configuration menu with the remote control's [User] button. Pressing the [User] button directly displays the assigned menu item selection/ adjustment screen, allowing you to make one-touch changes to settings/adjustments. You can assign one of the following items to the [User] button.
List of Functions Submenu 82 Function Display You can make settings related to the projector's display. Messages: When set to Off, the following items will not be displayed. Item names when the Source, Color Mode, or Aspect Ratio is changed, messages when no signal is being input, and warnings such as High Temp Warning. Display Background*1: You can set the screen background to Black, Blue, or Logo when no image signal is available.
List of Functions Submenu 83 Function Plug-in Power When set to On you can use a microphone with Plug-in Power support. USB Type B Set to USB Display when the projector and a computer are connected by a USB cable and computer images are projected. s "Projecting with USB Display" p.32 Set to Wireless Mouse when the mouse pointer is to be operated by the Remote Control. s "Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse)" p.
List of Functions 84 Submenu Function Network Configuration The following menus are available for setting Network items. Basic, Wireless LAN, Security, Wired LAN, Mail, Others, Reset, and Complete * Displays available region information for the Wireless LAN unit being used. For more details, contact your local dealer or the nearest address provided in the Epson Projector Contact List.
List of Functions 85 Basic menu Submenu Projector Keyword Function When set to On, you have to enter the keyword when you try to connect the projector to a computer via a network. As a result, you can prevent presentations from being interrupted by connections from other computers. Normally this should be set to On. s EasyMP Network Projection Operation Guide Wireless LAN menu Submenu Function Projector Name Displays the projector name used to identify the projector when connected to a network.
List of Functions Submenu 86 Function Connection Mode Set the connection mode when using EasyMP Network Projection to connect the projector and computer. This is set to Quick by default. See the following manual for details on connection mode. s EasyMP Network Projection Operation Guide Channel (This can only be set if Connection Mode is set to Quick.) Select the frequency band used by the wireless LAN from 1ch, 6ch, or 11ch. This is set to 11ch by default. Wireless LAN Sys.
List of Functions 87 Security menu Submenu Security Submenu Function Encryption Key 1/Encryption Key 2/Encryption Key 3/Encryption Key 4 You can enter the key used for WEP encryption. Enter the key in single-byte characters following instructions from the network administrator for the network in which the projector participates. The type and number of characters that can be entered differs depending on the WEP Encryption and Format settings. 128Bit - ASCII: Single-byte alphanumeric, 13 characters.
List of Functions • WPA This is an encryption standard that improves security which is a weak point of WEP. Although there are multiple kinds of WPA encryption methods, this projector uses TKIP and AES. WPA also includes user authentication functions. WPA authentication provides two methods: using an authentication server, or authenticating between a computer and an access point without using a server. This projector supports the latter method, without a server.
List of Functions Submenu IP Address Display 89 Function To prevent the IP address from being displayed on Network Info in the Network Menu and on the LAN Standby screen, set this to Off. Submenu SMTP Server You can input the IP addressg for the SMTP server for the projector. You can enter a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used. 127.x.x.x, 224.0.0.0 to 255.255.255.
List of Functions 90 Others menu Submenu Function AMX Device Discovery When the projector is connected to a network, set this to On when you want to enable the projector to be detected by AMX Device Discoveryg. Set this to Off if you are not connected to an environment controlled by a controller from AMX or AMX Device Discovery. RoomView Set this to On only when monitoring or controlling the projector over the network using Crestron RoomView . Otherwise, set this to Off.
List of Functions 91 s "Automatically Detect Input Signals and Change the Projected Image Reset menu (Source Search)" p.31 Resets all of the network settings. Submenu Submenu Reset network settings. Lamp Hours You can display the cumulative lamp operating time*. When it reaches the lamp warning time, the characters are displayed in yellow. Source You can display the source name for the connected equipment currently being projected.
List of Functions Submenu 92 Function Status This is information about errors that have occurred on the projector. This information may be needed if service is required. Serial Number Displays the projector's serial number. Event ID Displays the application error log. s "About Event ID" p.108 * The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours and above is displayed as "10H", "11H", and so on.
Troubleshooting This chapter explains how to identify problems and what to do if a problem is found.
Using the Help 94 If a problem occurs with the projector, the Help screen is displayed to assist you by pressing the Help button. You can solve problems by answering the questions. a c Confirm the selection. Using the remote control Using the control panel Press the [Help] button. The Help screen is displayed. Using the remote control Using the control panel Questions and solutions are displayed as shown on the screen below. Press the [Help] button to exit the Help. b Select a menu item.
Problem Solving 95 If you are having a problem with the projector, first check the projector's indicators and refer to "Reading the Indicators" below. See the following if the indicators do not show clearly what the problem might be. s "When the Indicators Provide No Help" p.98 Reading the Indicators The projector is provided with the following three indicators that indicate the operating status of the projector. A Power indicator Indicates the operating status.
Problem Solving 96 Refer to the following table to see what the indicators mean and how to remedy problems that they indicate. If all indicators are off, check that the power cable is connected correctly and that the power is being supplied normally. Sometimes, when the power cable is unplugged, the t indicator remains lit for a short period, but this is not a fault.
Problem Solving Status 97 Cause Remedy or Status If it is not cracked: Reinstall the lamp and turn on the power. If the error continues: Replace the lamp with a new one and then turn on the power. If the error continues: Stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or the nearest address provided in the Epson Projector Contact List.
Problem Solving 98 When the Indicators Provide No Help If any of the following problems occur and the indicators do not offer a solution, refer to the pages given for each problem. Problems Relating to Images s p.99 • No images appear Projection does not start, the projection area is completely black, or the projection area is completely blue. • Moving images are not displayed Moving images being projected from a computer appear black and nothing is projected. s p.
Problem Solving 99 Problems Relating to Images No images appear Check Remedy Did you press the [t] button? Press the [t] button to turn the power on. Are the indicators switched off? The power cable is not connected correctly or power is not being supplied. Connect the projector's power cable correctly. s "From Installation to Projection" p.30 Check that your electrical outlet or power source is functioning correctly.
Problem Solving 100 Moving images are not displayed (only the moving image portion turns black) Check Is the computer's image signal being output to the LCD and the monitor? (Only when projecting images from a laptop computer or a computer with a built-in LCD screen) Remedy Change the image signal from the computer to external output only. Check your computer's documentation, or contact the computer's manufacturer.
Problem Solving 101 Check Are the image signals being output to the projector? (Only when projecting images from a laptop computer or a computer with a built-in LCD screen) Remedy If the image signals are only being output to the computer's LCD monitor or to the accessory monitor, you need to change the output to an external destination as well as the computer's own monitor.
Problem Solving 102 Interference or distortion appear in images Check Remedy Is the image signal format setting correct? (Only when projecting images from a video source) Change the setting according to the signal for the connected equipment. s Signal - Video Signal p.78 Are the cables connected correctly? Check that all the cables required for projection are securely connected. s "Connecting Equipment" p.
Problem Solving 103 Check Remedy Is the computer set for dual display? (Only when projecting computer images) If dual display is activated in the Display Properties of the computer's Control Panel, only about half of the image on the computer screen is projected. To display the entire image on the computer screen, turn off the dual display setting.
Problem Solving 104 Images appear dark Check Remedy Is the image brightness set correctly? Adjust the Brightness and Power Consumption settings from the Configuration menu. s Image - Brightness p.77 s Settings - Power Consumption p.80 Is the contrastg adjusted correctly? Adjust the Contrast setting from the Configuration menu. s Image - Contrast p.77 Is it time to replace the lamp? When the lamp is nearly ready for replacement, the images become darker and the color quality becomes poorer.
Problem Solving 105 Other Problems No sound can be heard or the sound is faint Check Remedy Check that the audio/video cable is securely attached to both the projector and audio source. Disconnect the cable from the Audio port, and then reconnect the cable. Is the volume adjusted to the minimum setting? Adjust the volume so that sound can be heard. s Settings - Volume p.80 s "Adjusting the Volume" p.40 Is the Mic Input Level set at the maximum? Lower the Mic Input Level.
Problem Solving 106 The remote control does not work Check Remedy Is the remote control light-emitting area pointing towards the remote receiver on the projector during operation? Point the remote control towards the remote receiver. s "Remote control operating range" p.17 Is the remote control too far from the projector? The operating range for the remote control is about 6 m. s "Remote control operating range" p.
Problem Solving 107 Check Is power being supplied to the projector? Remedy Check that your electrical outlet or power source is functioning correctly. Is the Mail Notification function set correctly in the Configuration An error notification email is sent according to the Mail settings in the Configuration menu. Check if it is set correctly. menu? s "Mail menu" p.
About Event ID 108 Check the numbers and then apply the following countermeasures. If you cannot resolve the problem, contact your network administrator, or contact your local dealer or the nearest address provided in the Epson Projector Contact List. s Epson Projector Contact List Event ID Cause Remedy 0432 0435 Failed to startup EasyMP Network Projection. Restart the projector. 0434 0482 0484 0485 Network communication is unstable.
Maintenance This chapter provides information on maintenance procedures to ensure the best level of performance from the projector for a long time to come.
Cleaning You should clean the projector if it becomes dirty or if the quality of projected images starts to deteriorate. Attention 110 Attention Do not rub the lens with harsh materials or subject the lens to shocks, as it can easily become damaged. Turn off the projector's power before cleaning. Cleaning the Air Filter Cleaning the Projector's Surface Clean the projector's surface by wiping it gently with a soft cloth.
Cleaning a 111 • If a message is frequently displayed, even after cleaning, it is time to replace the air filter. Replace it with a new air filter. s "Replacing the Air Filter" p.116 • It is recommended that you clean these parts at least once every three months. Clean them more often than this if using the projector in a particularly dusty environment.
Replacing Consumables This section explains how to replace the lamp and the air filter. 112 • The lamp indicator flashes orange. Replacing the Lamp Lamp replacement period It is time to replace the lamp when: • The following message is displayed. "Time to replace the lamp. Please contact your Epson projector reseller or visit www.epson.com to purchase." • The projected image gets darker or starts to deteriorate. The message is displayed for 30 seconds.
Replacing Consumables 113 Attention • The lamp replacement message is set to appear after the following time periods in order to maintain the initial brightness and quality of the projected images. EB-925/EB-915W/EB-910W When Power Consumption is set to Normal: About 4000 hours When Power Consumption is set to ECO: About 6000 hours EB-905/EB-900/EB-96W/EB-95 When Power Consumption is set to Normal: About 5000 hours When Power Consumption is set to ECO: About 6000 hours s Settings - Power Consumption p.
Replacing Consumables 114 d Take out the old Lamp by pulling the handle. If the Lamp is cracked, replace it with a new lamp, or contact your local dealer for further advice. s Epson Projector Contact List ② ① c Loosen the two lamp fixing screws.
Replacing Consumables e 115 Install the new lamp. Insert the new Lamp along the guide rail in the correct direction so that it fits in place, push in firmly, and once it is fully inserted tighten the two screws. ① ② Attention • Make sure you install the lamp securely. If the lamp cover is removed, the power turns off automatically as a safety precaution. If the lamp or the lamp cover is not installed correctly, the power does not turn on.
Replacing Consumables 116 Replacing the Air Filter Air filter replacement period It is time to replace the air filter when: • There is a tear in the air filter. • The message is displayed even though the air filter has been cleaned. How to replace the air filter The air filter can be replaced even when the projector is suspended from a ceiling. a After you turn off the projector's power and the confirmation buzzer beeps twice, disconnect the power cable. b Open the air filter cover.
Appendix
Optional Accessories and Consumables The following optional accessories and consumables are available. Please purchase these products as and when needed. The following list of optional accessories and consumables is current as of: October 2010. Details of accessories are subject to change without notice and availability may vary depending on the country of purchase.
Screen Size and Projection Distance 119 A Projection Distance (For EB-925/EB-905) 4:3 Screen Size Minimum (Wide) to Maximum (Tele) B 60" 120x91 169 - 275 -10 80" 160x120 226 - 368 -13 100" 200x150 283 - 460 -16 150" 300x230 426 - 692 -24 200" 410x300 568 - 923 -32 250" 500x380 711 - 1155 -40 300" 610x457 854 - 1386 -48 Unit: cm A 16:9 Screen Size A Projection distance B Distance from the center of the lens to the base of the screen (or to the top of the screen, if suspend
Screen Size and Projection Distance 120 A Projection Distance (For EB-915W) 4:3 Screen Size Minimum (Wide) to Maximum (Tele) B 60" 120x91 203 - 331 -2 80" 160x120 271 - 442 -3 100" 200x150 340 - 553 -4 120" 244x183 408 - 664 -5 150" 300x230 511 - 831 -6 200" 410x300 682 - 1108 -8 250" 500x380 854 - 1386 -10 Unit: cm A 16:9 Screen Size A Projection distance B Distance from the center of the lens to the base of the screen (or to the top of the screen, if suspended from a ce
Screen Size and Projection Distance 121 Unit: cm A 16:10 Screen Size Minimum (Wide) to Maximum (Tele) B 30" 64x40 88 - 144 -1 40" 86x54 118 - 193 -1 50" 110x67 149 - 243 -2 60" 130x81 179 - 292 -2 80" 170x110 239 - 390 -3 100" 220x130 300 - 488 -3 150" 320x200 451 - 733 -5 200" 430x270 603 - 979 -7 250" 540x340 754 - 1224 -8 280" 605x377 845 - 1371 -9 Projection Distance (For EB-910W) A Projection distance B Distance from the center of the lens to the base of th
Screen Size and Projection Distance 122 Unit: cm A 4:3 Screen Size Minimum (Wide) to Maximum (Tele) B A 16:10 Screen Size Minimum (Wide) to Maximum (Tele) B 60" 120x91 153 - 184 -8 80" 160x120 205 - 246 -11 30" 64x40 67 - 80 -4 100" 200x150 256 - 308 -14 40" 86x54 89 - 108 -5 150" 300x230 385 - 462 -21 50" 110x67 112 - 135 -6 200" 410x300 514 - 617 -28 60" 130x81 135 - 162 -7 250" 500x380 643 - 771 -35 80" 170x110 181 - 217 -10 260" 520x400 668 - 802 -
Screen Size and Projection Distance 123 A Projection Distance (For EB-900) 4:3 Screen Size Minimum (Wide) to Maximum (Tele) B 60" 120x91 145 - 174 -10 80" 160x120 194 - 233 -14 100" 200x150 242 - 291 -17 150" 300x230 364 - 438 -26 200" 410x300 486 - 584 -34 250" 510x380 608 - 730 -43 300" 610x460 730 - 877 -51 Unit: cm A 16:9 Screen Size A Projection distance B Distance from the center of the lens to the base of the screen (or to the top of the screen, if suspended from a
Screen Size and Projection Distance 124 A Projection Distance (For EB-96W) 4:3 Screen Size Minimum (Wide) to Maximum (Tele) B 60" 120x91 190 - 229 -8 70" 142x107 222 - 267 -10 80" 160x120 255 - 306 -11 100" 200x150 319 - 383 -14 150" 300x230 480 - 577 -20 200" 410x300 641 - 770 -27 280" 569x427 898 - 1079 -38 Unit: cm A 16:9 Screen Size A Projection distance B Distance from the center of the lens to the base of the screen (or to the top of the screen, if suspended from a
Screen Size and Projection Distance 125 Unit: cm A 16:10 Screen Size Minimum (Wide) to Maximum (Tele) B 35" 76x47 97 - 117 -4 40" 86x54 111 - 134 -5 50" 110x67 139 - 168 -6 60" 130x81 168 - 202 -7 80" 170x110 225 - 270 -10 100" 220x130 281 - 338 -12 150" 320x200 424 - 509 -18 200" 430x270 566 - 680 -24 320" 640x400 907 - 1089 -39 Projection Distance (For EB-95) A Projection distance B Distance from the center of the lens to the base of the screen (or to the top of t
Screen Size and Projection Distance 126 A 4:3 Screen Size Minimum (Wide) to Maximum (Tele) B 60" 120x91 180 - 217 -10 80" 160x120 241 - 290 -14 100" 200x150 302 - 363 -17 150" 300x230 454 - 546 -25 200" 410x300 607 - 729 -34 250" 500x380 759 - 912 -42 300" 610x460 912 - 1095 -51 Unit: cm A 16:9 Screen Size Minimum (Wide) to Maximum (Tele) B 30" 66x37 97 - 117 +1 40" 89x50 130 - 156 +1 50" 110x62 163 - 196 +1 60" 130x75 196 - 236 +1 80" 180x100 263 - 316
Supported Monitor Displays 127 Component Video Supported Resolutions Computer signals (analog RGB) Signal Refresh Rate (Hz) Resolution (dots) SDTV (480i) 60 720x480 Signal Refresh Rate (Hz) Resolution (dots) SDTV (576i) 50 720x576 VGA 60/72/75/85 640x480 SDTV (480p) 60 720x480 SVGA 56/60/72/75/85 800x600 SDTV (576p) 50 720x576 XGA 60/70/75/85 1024x768 HDTV (720p) 50/60 1280x720 WXGA 60 1280x768 HDTV (1080i) 50/60 1920x1080 60 1360x768 60/75/85 1280x800 WXGA+ 60/7
Supported Monitor Displays 128 Signal Refresh Rate (Hz) Resolution (dots) SDTV (480i/480p) 60 720x480 SDTV (576i/576p) 50 720x576 HDTV (720p) 50/60 1280x720 HDTV (1080i) 50/60 1920x1080 HDTV (1080p) 24/30/50/60 1920x1080
Specifications 129 Projector General Specifications EB-925 Product name EB-915W EB-905 345 (W) x 93 (H) x 263 (D) mm Dimensions 0.63" LCD panel size 0.59" Wide 0.59" Wide 0.63" Polysilicon TFT active matrix Display method 786,432 pixels XGA (1024 (W) x 768 (H) dots)x 3 Resolution 1,024,000 pixels WXGA (1280 (W)x 800 (H) dots)x 3 Zoom adjustment 1,024,000 pixels WXGA (1280 (W)x 800 (H) dots)x 3 Manual (1 to 1.6) Manual (1 to 1.2) UHE lamp, 230 W Model No.: ELPLP61 Lamp Max.
Specifications 130 Approx. 3.4 kg Mass EB-900 Product name Approx. 3.2 kg EB-96W 345 (W) x 93 (H) x 263 (D) mm Dimensions 0.55" LCD panel size 0.59" Wide 0.55" Polysilicon TFT active matrix Display method 786,432 pixels XGA (1024 (W) x 768 (H) dots)x 3 Resolution 1,024,000 pixels WXGA (1280 (W)x 800 (H) dots)x 3 Focus adjustment Manual Zoom adjustment Manual (1 to 1.2) 786,432 pixels XGA (1024 (W) x 768 (H) dots)x 3 UHE lamp, 200 W Model No.: ELPLP60 Lamp 16 W Max.
Specifications 131 Approx. 3.1 kg Mass Connectors Approx. 3.3 kg Approx. 3.
Specifications This product is also designed for IT power distribution system with phase-to-phase voltage 230V. Angle of tilt If you use the projector tilted at an angle of more than 30˚ it could be damaged and cause an accident.
Specifications 133 DECLARATION of CONFORMITY According to 47CFR, Part 2 and 15 Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers We: Located at: Tel: Epson America, Inc. 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806 562-290-5254 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device.
Appearance 134 EB-925/EB-915W/EB-905 A B Center of lens Distance from center of lens to suspension bracket fixing point Units: mm
Appearance 135 EB-910W/EB-900/EB-96W/EB-95 A B Center of lens Distance from center of lens to suspension bracket fixing point Units: mm
Glossary 136 This section briefly explains the difficult terms that are not explained in the text of this guide. For details, refer to other commercially available publications. AMX Device Discovery AMX Device Discovery is a technology developed by AMX to facilitate AMX control systems for easy operation of the target equipment. Epson have implemented this protocol technology, and have provided a setting to enable the protocol function (ON). See the AMX Web site for more details. URL http://www.amx.
Glossary 137 sRGB An international standard for color intervals that was formulated so that colors that are reproduced by video equipment can be handled easily by computer operating systems (OS) and the Internet. If the connected source has an sRGB mode, set both the projector and the connected signal source to sRGB. SSID SSID is identification data for connecting to another device on a wireless LAN. Wireless communication is possible between devices that correspond to SSID.
General Notes 138 All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein.
General Notes GNU GPL This projector product includes the open source software programs which apply the GNU General Public License Version 2 or later version ("GPL Programs"). We provide the source code of the GPL Programs until five (5) years after the discontinuation of same model of this projector product. If you desire to receive the source code of the GPL Programs, please see the "EPSON Projector Contact List" in the User's Guide, and contact the customer support of your region.
General Notes GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License.
General Notes c) 4. 5. 6. Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it.
General Notes Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10.
General Notes , 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License.
General Notes Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. Most GNU software, including some libraries, is covered by the ordinary GNU General Public License.
General Notes a) b) The modified work must itself be a software library. You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.
General Notes 6. If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.
General Notes 9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License.
General Notes 16.
General Notes THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
General Notes The Unix configuration script "configure" was produced with GNU Autoconf. It is copyright by the Free Software Foundation but is freely distributable. The same holds for its supporting scripts (config.guess, config.sub, ltconfig, ltmain.sh). Another support script, install-sh, is copyright by M.I.T. but is also freely distributable. It appears that the arithmetic coding option of the JPEG spec is covered by patents owned by IBM, AT&T, and Mitsubishi.
General Notes libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc. For the purposes of this copyright and license, "Contributing Authors" is defined as the following set of individuals: Andreas Dilger Dave Martindale Guy Eric Schalnat Paul Schmidt Tim Wegner The PNG Reference Library is supplied "AS IS". The Contributing Authors and Group 42, Inc.
General Notes If you redistribute modified sources, we would appreciate that you include in the file ChangeLog history information documenting your changes. libmd5-rfc This projector product includes the open source software program "libmd5-rfc" which applies the terms and conditions provided by owner of the copyright to the "libmd5rfc". The "libmd5-rfc" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
General Notes 2. "You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License. "Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.
General Notes 5. 6. 7. 8. You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License. Submission of Contributions.
General Notes aes-src-29-04-09 License terms of conditions of each program which are provided by owner of the copyright to the “aes-src-29-04-09” are as follows. Copyright (c) 1998-2008, Brian Gladman, Worcester, UK. All rights reserved. LICENSE TERMS The redistribution and use of this software (with or without changes) is allowed without the payment of fees or royalties provided that: 1. source code distributions include the above copyright notice, this list of conditions and the following disclaimer; 2.
Index 156 A A/V Mute ...................................................... 51 Abs. Color Temp. ........................................ 78 Air exhaust vent ........................................... 10 Air filter replacement period ................... 116 Aspect ...................................................... 42, 79 Auto H/V-Keystone .................................... 80 Auto Iris .................................................. 41, 78 Auto Setup ..............................................
Index 157 Problem Solving ........................................... Progressive .................................................... Projection ...................................................... Projector keyword ....................................... Projector Name ............................................ Projector Setup ............................................. Monitor Displays ....................................... 127 Mouse pointer ..............................................
Index User Button .................................................. User Pattern .................................................. User's Logo ................................................... User's Logo Protect ...................................... 158 81 57 55 59 V Video Port ..................................................... 11 Video Signal ........................................... 79, 91 Volume .......................................................... 80 Volume Button ...................
