User`s guide

Submenu Function

Overscan

Changes the output image ratio (the range of the projected

image). You can set the cropping range to Off, 4%, or 8%. When

the source is HDMI, Auto is available. When Auto is selected, it

automatically changes to Off or 8% according to the input signal.

Reset

You can reset all adjustment values on the Signal menu to their

default settings, except for Input Signal.

See the following to return all menu items to their default

settings.

s "Reset Menu" p.85

Settings Menu

Submenu Function

Keystone

You can correct keystone distortion.

• When H/V-Keystone is selected:

• Correcting manually

Adjust V-Keystone and H-Keystone to correct

horizontal and vertical keystone distortion.

• Correcting automatically

Set Auto V-Keystone to On.

(This item cannot be selected if Projection is set to

Front/Ceiling, Rear, or Rear/Ceiling.)

s "Correcting automatically (Auto V-Keystone)" p.34

• When Quick Corner is selected:

Select and correct the four corners of the projected image.

s "Correcting manually (Quick Corner)" p.35

Control Panel

Lock

You can use this to restrict operation of the projector's control

panel.

"Restricting Operation (Control Panel Lock)" p.58

List of Functions