User`s guide

Summary of correction procedure

When multiple projectors are set up and you need to make corrections, use

the following procedure to correct one projector at a time.

1. Set the projector ID and the remote control ID.

Set a projector ID for the target projector, then set the same ID for the

remote control, so that you can limit the operation to one target projector.

s "Setting the ID and Using the Remote Control" p.51

2. Correct the color difference.

You can carry out color correction when projecting from multiple projectors.

You can adjust from black to white in five stages called levels 1 to 5, and in

each of these 5 levels you can adjust the following two points.

• Correcting brightness

You can correct the image brightness to make them all equal.

• Correcting color

You can correct the image color so that they match closely.

Correcting

After setting up the projectors, correct the brightness and tone for each

projector to reduce the differences.

Press the [Menu] button.

"Using the Configuration Menu" p.62

Select Multi-screen from Extended.

Select the level to be corrected in Adjustment Level.

• Each time a level is selected, the pattern of the level selected is

displayed.

• You can start correcting from any level, usually you can make it

darker or lighter by correcting 1 to 5 or 5 to 1.

Correct the brightness with Brightness Correct.

• When you select Level 5, all the images are adjusted to the

darkest image from multiple projectors.

• When you select Level 1, all the images are adjusted to the

brightest image from multiple projectors.

• When you select Level 2 to Level 4, all the images are adjusted to

the mid-range brightness image from multiple projectors.

• Because each time the [Enter] button is pressed the image

displayed changes between the pattern display and the actual

image, you can check the correction results and make corrections

in the actual image.

Correct the Color Correct. (G/R) and Color Correct. (B/Y) settings.

Repeat procedures 3 to 5 until corrections are finished.

Projection Functions