Operation Manual

Connecting a LAN Cable
Connect with a commercially available 100BASE-TX or 10BASE-T LAN
cable.
Connected equip-
ment
Connecting cable Projector port
LAN port on network
hub
LAN cable (commercially
available)
LAN port
Attention
To prevent malfunctions, use a category 5 shielded LAN cable.
Connecting to an external monitor
You can display computer images input from a computer on an external
monitor connected to the projector and the screen at the same time. This
means that you can check projected images on an external monitor when
giving presentations even if you cannot see the screen. Connect using the
cable supplied with the external monitor.
q
Only analog RGB signals from a computer connected to the
Computer1 input port or the BNC input port can be displayed on an
external monitor. Images from equipment connected to other ports
and component video signals cannot be displayed.
Connected equip-
ment
Connecting cable Projector port
Monitor Cable supplied with monitor Monitor Out port
q
• Setting gauges such as Keystone, the configuration menu, or Help
screens are not output to the external monitor.
• The image is not displayed on the external monitor when the
projector is on standby.
Connecting to External Speakers
You can connect speakers with built-in amplifiers to the projector's Audio
Out port to enjoy a fuller quality of sound. Connect with a commercially
available audio cable (pin plug
W 3.5 mm stereo mini plug and so on). Use
an audio cable compatible with the connector on the external speakers.
Connected equip-
ment
Connecting cable Projector port
Audio device Audio cable (commercially
available)
Audio Out port
Connecting to External Equipment
131