Operation Manual

You can select the aspect mode according to the type of input signal, ratio

of height and width, and resolution to switch the

Aspect Ratio

of the

projected image. The aspect modes are listed below. The aspect modes that

can be set depend on the type of image that is being projected.

Aspect mode Explanation

Normal

Projects to the full projection size retaining the

aspect ratio of the input image.

Auto

Projects in an appropriate aspect ratio based on

information from the signal being input.

16:9

Projects to the full projection size at an aspect ratio

of 16:9.

Full

Project at full size.

Zoom

Projects the input image enlarged to the full lateral

direction size as the aspect ratio remains. Parts that

extend beyond the projection size are not projected.

Native

Projects at the resolution of the input image size to

the center of the screen. This is ideal for projecting

clear images.

To select Full while inputting 1080i signal, set Progressive in the

Configuration menu to Off. s p.53

Procedure

Remote Control

The aspect mode name is displayed on the screen by pressing the button.

If you press the button while the aspect mode name is displayed on the

screen, it changes to the next aspect mode.

The aspect mode can also be set using Aspect in the Signal menu

from the configuration menu. s p.53

Changing the Aspect Mode

Projecting images from video equipment or from the HDMI input

port

Each time the [Aspect] button on the remote control is pressed, the aspect

mode changes in the order Auto, 16:9, Full, Zoom, and Native.

s p.27

Example: 720p signal input (resolution: 1280x720, aspect ratio: 16:9)

Auto

16:9

Changing the Aspect Ratio of the Projected Image