User`s guide

Sub Menu Function
Keystone
You can correct keystone distortion.
H/V-Keystone: Corrects horizontal and vertical keystone distortion. Select one of V-Keystone or H-Keystone. s p.23
Use the [w/
], [v/ ], [</ ] and [>/ ] buttons on the control panel to perform similar corrections to V-Keystone and H-Keystone.
Quick Corner: Selects and corrects the four corners of the projected image. s p.21
Split Screen
You can split the screen into two screens. s p.30
Control Panel Lock
You can use this to restrict operation of the projector's control panel. s p.47
Pointer Shape
You can select the shape of the pointer. s p.35
Pointer 1:
Pointer 2: Pointer 3:
Power Consumption
You can set the lamp brightness to Normal or ECO.
Select ECO if the images being projected are too bright such as when projecting images in a dark room or onto a small screen. When ECO is selected, the
amount of electricity consumed and the lamp's operating life are changed as follows, and the fan rotation noise during projection is reduced. Electrical
consumption: about 16% decrease, lamp life: about 1.5 times longer
Volume
You can adjust the volume. Setting details are saved for each source and each image signal.
Audio Input
LAN Audio Input: When the image from a computer that is connected through the network is being projected, audio is output from the projector using
the port that is set here. When transferring audio from the computer to the projector to output it, select LAN.
Remote Receiver
You can limit the reception of the operation signal from the remote control.
When you want to prohibit operation by remote control, or if the remote receiver has a fluorescent light too close to it, you can make settings to
deactivate the remote receiver you do not want to use or that is experiencing interference.
If the [Menu] button on the remote control or control panel is pressed for 15 seconds, this parameter will return to the default setting.
Settings Menu
55