User`s guide

Wireless LAN Menu
To connect the projector to a computer using a wireless LAN, install the Wireless LAN unit (ELPAP03). s p.134
Sub Menu Function
Wireless LAN Power
Set this parameter to On when connecting the projector and a computer via a wireless LAN. If you do not want to connect via a wireless LAN, set this
parameter to Off to prevent unauthorized access by others.
Connection Mode
Set the connection mode to use when connecting the projector and a computer via a wireless LAN. When using an
Ad Hoc g connection, the connection
mode is set to Quick. When using
Infrastructure Mode g , the connection mode is set to Advanced. When connecting the computer to the projector
using EasyMP Multi PC Projection, set the connection mode to Advanced.
Wi-Fi Protected Setup
When using a
WPS (Wi-Fi Protected Setup) g compatible access point via a wireless LAN, you can easily connect the projector to the access point and
make security settings. s p.118
Channel
When connecting in Quick mode, you can select a channel that uses 802.11b/g. If interference from other signals occurs, use a different channel.
Wireless LAN system
Sets the wireless LAN system. When connecting in Advanced mode, Auto can be set to automatically select a method that is suitable to the application
environment.
In an area that does not support 802.11a, only 802.11b/g is displayed.
SSID Auto Setting
When connecting in Quick mode, SSID Auto Setting can be set to On to enable finding this projector faster from among multiple projectors to make
connection more stable. The SSID will be created automatically, so the following address cannot be set.
Set this parameter to Off when connecting from one computer to multiple projectors.
SSID
Enter an SSID. When an SSID is provided for the wireless LAN system in which the projector participates, enter the SSID.
You can enter up to 32 single-byte alphanumeric characters.
Network Menu
63