User Guide

Front/Top
EB-G5950/G5650W with the standard lens is shown in the illustration.
From here on, all features will be explained using illustrations of EB-
G5950/G5650W with a standard lens unless otherwise specified.
Name Function
A
Lamp cover
Open this cover when replacing the projector's lamp.
s p.104
Name Function
B
Air exhaust vent
Exhaust vent for air used to cool the projector internally.
Caution
Do not place objects that may become warped or
otherwise affected by heat near the Air exhaust vent
and do not put your face or hands near the vent
while projection is in progress.
C
Front adjustable foot
Extend and adjust the position of the projected image
when the projector is placed on a surface such as a desk.
s
Quick Start Guide
D
Foot adjust lever
Pull out the foot lever to extend and retract the front foot.
s Quick Start Guide
E
Zoom ring
Adjusts the image size. s Quick Start Guide
F
Projection lens
Images are projected through here.
G
Lens unit removal
button
Press this button to remove the lens unit when replacing
lens units. s p.141
H
Remote receiver
Receives signals from the remote control. s p.19
I
Focus ring
Adjusts the image focus. s Quick Start Guide
J
Air filter tab
When cleaning or replacing the air filter, use this tab to
pull out the air filter. s p.101, p.107
K
Status indicators
The color of the indicators and whether they are flashing
or lit indicate the status of the projector. s p.87
L
Wireless LAN indicator
(EB-G5950/G5650W
only)
This indicator shows the status of network access when the
Wireless LAN unit is installed. s p.143
M
Air intake vent
(Air filter)
Takes in air to cool the projector internally. If dust collects
here it can cause the internal temperature to rise, and this
can lead to problems with operation and shorten the
optical engine's service life. Be sure to clean the air filter
regularly. s p.101
Part Names and Functions
10