User Guide

Connecting a LAN Cable
Connect with a commercially available 100BASE-TX or 10BASE-T LAN
cable.
Connected equip-
ment
Connecting cable Projector port
LAN port on network
hub
LAN cable (commercially
available)
LAN port
Attention
To prevent malfunctions, use a category 5 shielded LAN cable.
Connecting to an external monitor (EB-G5950/
G5900/G5650W/G5600 only)
You can display computer images input from a computer on an external
monitor connected to the projector and the screen at the same time. This
means that you can check projected images on an external monitor when
giving presentations even if you cannot see the screen. Connect using the
cable supplied with the external monitor.
q
Only RGB signals from a computer connected to one of the following
input ports can be displayed on an external monitor: Computer1 input
port, Computer2 input port, and BNC input port. Images from
equipment connected to other ports and component video signals
cannot be displayed.
Connected equip-
ment
Connecting cable Projector port
Monitor Cable supplied with monitor Monitor Out port
q
• Setting gauges such as Keystone, the configuration menu, or Help
screens are not output to the external monitor.
• The image is not displayed on the external monitor when the
projector is on standby.
Connecting to External Speakers (EB-G5950/
G5900/G5650W/G5600 only)
You can connect speakers with built-in amplifiers to the projector's Audio
Out port to enjoy a fuller quality of sound. Connect with a commercially
Connecting to External Equipment
139